Compare commits

..
49 Commits
Author SHA1 Message Date
Erimel f30ee3bcce Update solarxr-protocol 2024-11-14 21:24:29 -05:00
Erimel e3a99cdcf5 Merge branch 'main' into flex 2024-11-14 21:19:33 -05:00
Erimel 704f2157ee remove debug logs 2024-11-03 20:47:34 -05:00
Erimel 95acdaf8c2 use byte and uint 2024-10-11 15:24:33 -04:00
Erimel 09c51fb5df protocolVersion and move datatype in firmwareconstants 2024-10-11 14:43:53 -04:00
Erimel d69399d471 don't add more stuff to handshake (legacy-only) 2024-10-11 11:45:53 -04:00
Erimel eac4341201 Merge branch 'fingers' into flex 2024-10-09 21:54:02 -04:00
Erimel 8c0c49f57a fix rebase 2024-10-09 21:51:17 -04:00
Erimel 79fcdb3cd9 try to do what Eiren maybe meant to do 2024-10-09 21:45:46 -04:00
Eiren Rain 96651ddeb7 Update tracker position protocol 2024-10-09 21:45:24 -04:00
Erimel ee0161575b support resistance going both ways 2024-10-09 21:45:24 -04:00
Erimel 82df10be7c show data support in tracker setting 2024-10-09 21:45:23 -04:00
Erimel 5489abd754 fix and improve thumb angle and direction 2024-10-09 21:45:21 -04:00
Erimel 9c0463cc86 fix merge 2024-10-09 21:45:21 -04:00
Erimel 25bcb84ade fix fingers mirror tracking 2024-10-09 21:45:21 -04:00
Erimel c3b76ab242 Fix thumb direction and angle 2024-10-09 21:45:20 -04:00
Erimel 7ea2767227 Make direction dependent on the TrackerPosition 2024-10-09 21:45:20 -04:00
Erimel 5264e3908d fix bugs 2024-10-09 21:45:20 -04:00
Erimel d4fb3847a9 Add basic reset calibration 2024-10-09 21:44:53 -04:00
Erimel a0afa4ca94 fix udp and improve design 2024-10-09 21:43:20 -04:00
Erimel c2ee25e9d1 wip better udp stuff 2024-10-09 21:43:05 -04:00
Erimel d5997ffb99 move flex logic stuff into its own class 2024-10-09 21:42:44 -04:00
Erimel 6dca92387b Don't send fingers if we don't have any tracker for them 2024-10-09 21:42:44 -04:00
Erimel 0a18a1d8e6 move VRServer instance declaration back 2024-10-09 21:42:44 -04:00
Erimel 0b890c197b fix Unit tests 2024-10-09 21:42:44 -04:00
Erimel 81157f3c18 WIP flex resistance and angle udp support 2024-10-09 21:42:44 -04:00
Erimel beaf83f097 add finger bones translations 2024-10-09 21:41:58 -04:00
Erimel 4e02562e05 Support receiving fingers via VMC 2024-10-09 21:41:57 -04:00
Erimel 708cab9ea8 Properly track rotations over 180 degrees 2024-10-09 21:41:57 -04:00
Erimel d29109887b fine tune slerp values, use quaternion space, support tpose reset 2024-10-09 21:41:57 -04:00
Erimel bbd63923dc add preview in GUI, fix vmc mirror and localRotation for fingers 2024-10-09 21:41:57 -04:00
Erimel 14293f4842 basic finger ik in skeleton 2024-10-09 21:41:57 -04:00
Erimel 0d4921e099 add fingers to UnityArmature 2024-10-09 21:41:57 -04:00
Erimel c7aa6451f2 skeleton wip 2024-10-09 21:41:56 -04:00
Erimel a80ce41079 Add finger bones variables 2024-10-09 21:41:48 -04:00
Erimel 6c289c91f4 Update solarxr-protocol 2024-10-09 21:26:49 -04:00
Erimel 79e7b19a12 fix fingers mirror tracking 2024-10-09 21:13:39 -04:00
Erimel 2f095aeb73 Don't send fingers if we don't have any tracker for them 2024-10-09 21:13:39 -04:00
Erimel 7909a1b312 move VRServer instance declaration back 2024-10-09 21:13:39 -04:00
Erimel d404fb5a88 fix Unit tests 2024-10-09 21:13:39 -04:00
Erimel 938f708c89 add finger bones translations 2024-10-09 21:13:38 -04:00
Erimel e1d9a2cd5b Support receiving fingers via VMC 2024-10-09 21:13:38 -04:00
Erimel 98c7db658f Properly track rotations over 180 degrees 2024-10-09 21:13:38 -04:00
Erimel 75cd829a5d fine tune slerp values, use quaternion space, support tpose reset 2024-10-09 21:13:38 -04:00
Erimel c4a4016d45 add preview in GUI, fix vmc mirror and localRotation for fingers 2024-10-09 21:13:38 -04:00
Erimel 0191b421bb basic finger ik in skeleton 2024-10-09 21:13:37 -04:00
Erimel 1ec642f3b5 add fingers to UnityArmature 2024-10-09 21:13:37 -04:00
Erimel 99a2cee182 skeleton wip 2024-10-09 21:13:37 -04:00
Erimel 063a686efa Add finger bones variables 2024-10-09 21:13:19 -04:00
281 changed files with 3353 additions and 16218 deletions

No files matched your search

+2 -1
View File
@@ -13,7 +13,8 @@
"Area: GUI":
- all:
- changed-files:
- all-globs-to-any-file: ["gui/**/*", "!gui/public/i18n/**/*"]
- any-glob-to-any-file: "gui/**/*"
- all-globs-to-all-files: "!gui/public/i18n/**"
"Area: Hardware Protocol":
- changed-files:
- any-glob-to-any-file: "server/core/src/main/java/dev/slimevr/tracking/trackers/udp/**"
+1 -1
View File
@@ -57,7 +57,7 @@ jobs:
- if: matrix.os == 'ubuntu-22.04'
name: Set up Linux dependencies
uses: awalsh128/cache-apt-pkgs-action@v1.4.3
uses: awalsh128/cache-apt-pkgs-action@latest
with:
packages: libgtk-3-dev webkit2gtk-4.1 libappindicator3-dev librsvg2-dev patchelf
# Increment to invalidate the cache
+5 -16
View File
@@ -144,7 +144,7 @@ jobs:
bundle-linux:
runs-on: ubuntu-24.04
runs-on: ubuntu-22.04
needs: [build, test]
if: contains(fromJSON('["workflow_dispatch", "create"]'), github.event_name)
steps:
@@ -158,27 +158,16 @@ jobs:
path: server/desktop/build/libs/
- name: Set up Linux dependencies
uses: awalsh128/cache-apt-pkgs-action@v1.4.3
uses: awalsh128/cache-apt-pkgs-action@latest
with:
packages: |
build-essential curl wget file libssl-dev libgtk-3-dev libappindicator3-dev librsvg2-dev
packages: libgtk-3-dev webkit2gtk-4.1 libappindicator3-dev librsvg2-dev patchelf libfuse2
# Increment to invalidate the cache
version: 2.0
version: 1.0
# Enables a workaround to attempt to run pre and post install scripts
execute_install_scripts: true
# Disables uploading logs as a build artifact
debug: false
- name: Set up specific Linux versioned dependencies
run: |
sudo apt-get update && sudo apt-get install -y \
libwebkit2gtk-4.1-0=2.44.0-2 \
libwebkit2gtk-4.1-dev=2.44.0-2 \
libjavascriptcoregtk-4.1-0=2.44.0-2 \
libjavascriptcoregtk-4.1-dev=2.44.0-2 \
gir1.2-javascriptcoregtk-4.1=2.44.0-2 \
gir1.2-webkit2-4.1=2.44.0-2;
- name: Cache cargo dependencies
uses: Swatinem/rust-cache@v2
with:
@@ -285,7 +274,7 @@ jobs:
./bundle_dmg.sh --volname SlimeVR --icon slimevr 180 170 --app-drop-link 480 170 \
--window-size 660 400 --hide-extension ../macos/SlimeVR.app \
--volicon ../macos/SlimeVR.app/Contents/Resources/icon.icns --skip-jenkins \
--eula ../../../../../LICENSE-MIT slimevr.dmg ../macos/SlimeVR.app
--eula ../../../../LICENSE-MIT slimevr.dmg ../macos/SlimeVR.app
- uses: actions/upload-artifact@v4
with:
-1
View File
@@ -1 +0,0 @@
update-notifier=false
Generated
-189
View File
@@ -1837,24 +1837,6 @@ dependencies = [
"want",
]
[[package]]
name = "hyper-rustls"
version = "0.27.3"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "08afdbb5c31130e3034af566421053ab03787c640246a446327f550d11bcb333"
dependencies = [
"futures-util",
"http",
"hyper",
"hyper-util",
"rustls",
"rustls-pki-types",
"tokio",
"tokio-rustls",
"tower-service",
"webpki-roots",
]
[[package]]
name = "hyper-util"
version = "0.1.9"
@@ -2018,15 +2000,6 @@ version = "1.70.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7943c866cc5cd64cbc25b2e01621d07fa8eb2a1a23160ee81ce38704e97b8ecf"
[[package]]
name = "itertools"
version = "0.13.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "413ee7dfc52ee1a4949ceeb7dbc8a33f2d6c088194d9f922fb8318faf1f01186"
dependencies = [
"either",
]
[[package]]
name = "itoa"
version = "0.4.8"
@@ -3151,55 +3124,6 @@ dependencies = [
"memchr",
]
[[package]]
name = "quinn"
version = "0.11.5"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "8c7c5fdde3cdae7203427dc4f0a68fe0ed09833edc525a03456b153b79828684"
dependencies = [
"bytes",
"pin-project-lite",
"quinn-proto",
"quinn-udp",
"rustc-hash",
"rustls",
"socket2",
"thiserror",
"tokio",
"tracing",
]
[[package]]
name = "quinn-proto"
version = "0.11.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "fadfaed2cd7f389d0161bb73eeb07b7b78f8691047a6f3e73caaeae55310a4a6"
dependencies = [
"bytes",
"rand 0.8.5",
"ring",
"rustc-hash",
"rustls",
"slab",
"thiserror",
"tinyvec",
"tracing",
]
[[package]]
name = "quinn-udp"
version = "0.5.7"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7d5a626c6807713b15cac82a6acaccd6043c9a5408c24baae07611fec3f243da"
dependencies = [
"cfg_aliases",
"libc",
"once_cell",
"socket2",
"tracing",
"windows-sys 0.59.0",
]
[[package]]
name = "quote"
version = "1.0.37"
@@ -3359,7 +3283,6 @@ dependencies = [
"http-body",
"http-body-util",
"hyper",
"hyper-rustls",
"hyper-util",
"ipnet",
"js-sys",
@@ -3368,16 +3291,11 @@ dependencies = [
"once_cell",
"percent-encoding",
"pin-project-lite",
"quinn",
"rustls",
"rustls-pemfile",
"rustls-pki-types",
"serde",
"serde_json",
"serde_urlencoded",
"sync_wrapper",
"tokio",
"tokio-rustls",
"tokio-util",
"tower-service",
"url",
@@ -3385,7 +3303,6 @@ dependencies = [
"wasm-bindgen-futures",
"wasm-streams",
"web-sys",
"webpki-roots",
"windows-registry",
]
@@ -3412,33 +3329,12 @@ dependencies = [
"windows-sys 0.48.0",
]
[[package]]
name = "ring"
version = "0.17.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c17fa4cb658e3583423e915b9f3acc01cceaee1860e33d59ebae66adc3a2dc0d"
dependencies = [
"cc",
"cfg-if",
"getrandom 0.2.15",
"libc",
"spin",
"untrusted",
"windows-sys 0.52.0",
]
[[package]]
name = "rustc-demangle"
version = "0.1.24"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "719b953e2095829ee67db738b3bfa9fa368c94900df327b3f07fe6e794d2fe1f"
[[package]]
name = "rustc-hash"
version = "2.1.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "c7fb8039b3032c191086b10f11f319a6e99e1e82889c5cc6046f515c9db1d497"
[[package]]
name = "rustc_version"
version = "0.4.1"
@@ -3461,46 +3357,6 @@ dependencies = [
"windows-sys 0.52.0",
]
[[package]]
name = "rustls"
version = "0.23.19"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "934b404430bb06b3fae2cba809eb45a1ab1aecd64491213d7c3301b88393f8d1"
dependencies = [
"once_cell",
"ring",
"rustls-pki-types",
"rustls-webpki",
"subtle",
"zeroize",
]
[[package]]
name = "rustls-pemfile"
version = "2.2.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "dce314e5fee3f39953d46bb63bb8a46d40c2f8fb7cc5a3b6cab2bde9721d6e50"
dependencies = [
"rustls-pki-types",
]
[[package]]
name = "rustls-pki-types"
version = "1.10.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "16f1201b3c9a7ee8039bcadc17b7e605e2945b27eee7631788c1bd2b0643674b"
[[package]]
name = "rustls-webpki"
version = "0.102.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "64ca1bc8749bd4cf37b5ce386cc146580777b4e8572c7b97baf22c83f444bee9"
dependencies = [
"ring",
"rustls-pki-types",
"untrusted",
]
[[package]]
name = "ryu"
version = "1.0.18"
@@ -3836,7 +3692,6 @@ dependencies = [
"discord-sdk",
"flexi_logger",
"glob",
"itertools",
"libloading 0.8.5",
"log",
"log-panics",
@@ -3925,12 +3780,6 @@ dependencies = [
"system-deps",
]
[[package]]
name = "spin"
version = "0.9.8"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "6980e8d7511241f8acf4aebddbb1ff938df5eebe98691418c4468d0b72a96a67"
[[package]]
name = "stable_deref_trait"
version = "1.2.0"
@@ -3975,12 +3824,6 @@ version = "0.11.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "7da8b5736845d9f2fcb837ea5d9e2628564b3b043a70948a3f0b778838c5fb4f"
[[package]]
name = "subtle"
version = "2.6.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "13c2bddecc57b384dee18652358fb23172facb8a2c51ccc10d74c157bdea3292"
[[package]]
name = "swift-rs"
version = "1.0.7"
@@ -4554,17 +4397,6 @@ dependencies = [
"syn 2.0.79",
]
[[package]]
name = "tokio-rustls"
version = "0.26.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "0c7bc40d0e5a97695bb96e27995cd3a08538541b0a846f65bba7a359f36700d4"
dependencies = [
"rustls",
"rustls-pki-types",
"tokio",
]
[[package]]
name = "tokio-util"
version = "0.7.12"
@@ -4849,12 +4681,6 @@ version = "0.2.6"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ebc1c04c71510c7f702b52b7c350734c9ff1295c464a03335b00bb84fc54f853"
[[package]]
name = "untrusted"
version = "0.9.0"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "8ecb6da28b8a351d773b68d5825ac39017e680750f980f3a1a85cd8dd28a47c1"
[[package]]
name = "url"
version = "2.5.2"
@@ -5170,15 +4996,6 @@ dependencies = [
"system-deps",
]
[[package]]
name = "webpki-roots"
version = "0.26.7"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "5d642ff16b7e79272ae451b7322067cdc17cadf68c23264be9d94a32319efe7e"
dependencies = [
"rustls-pki-types",
]
[[package]]
name = "webview2-com"
version = "0.33.0"
@@ -5772,12 +5589,6 @@ dependencies = [
"syn 2.0.79",
]
[[package]]
name = "zeroize"
version = "1.8.1"
source = "registry+https://github.com/rust-lang/crates.io-index"
checksum = "ced3678a2879b30306d323f4542626697a464a97c0a07c9aebf7ebca65cd4dde"
[[package]]
name = "zvariant"
version = "4.0.0"
-1
View File
@@ -65,7 +65,6 @@ work. If not, see <http://creativecommons.org/publicdomain/zero/1.0/>.
</provides>
<releases>
<release version="0.13.2" date="2024-11-06"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.13.2</url></release>
<release version="0.13.1" date="2024-11-05"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.13.1</url></release>
<release version="0.13.1~rc.3" type="development" date="2024-10-31"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.13.1-rc.3</url></release>
<release version="0.13.1~rc.2" type="development" date="2024-10-26"><url>https://github.com/SlimeVR/SlimeVR-Server/releases/tag/v0.13.1-rc.2</url></release>
+2 -2
View File
@@ -92,7 +92,7 @@
harfbuzz
libffi
libsoup_3
openssl.dev
openssl
pango
pkg-config
treefmt
@@ -140,7 +140,7 @@
enterShell = with pkgs; ''
# Export a LD_LIBRARY_PATH without libudev-zero as libgudev not likey
export SLIMEVR_RUST_LD_LIBRARY_PATH="$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH="${libudev-zero}/lib:${libayatana-appindicator}/lib:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH="${libudev-zero}/lib:$LD_LIBRARY_PATH"
# GStreamer plugins won't be found without this
export GST_PLUGIN_SYSTEM_PATH_1_0="${pkgs.gst_all_1.gstreamer.out}/lib/gstreamer-1.0:${pkgs.gst_all_1.gst-plugins-base}/lib/gstreamer-1.0:${pkgs.gst_all_1.gst-plugins-good}/lib/gstreamer-1.0:${pkgs.gst_all_1.gst-plugins-bad}/lib/gstreamer-1.0"
'';
+1 -1
View File
@@ -14,7 +14,7 @@ android.nonTransitiveRClass=true
org.gradle.unsafe.configuration-cache=false
kotlinVersion=2.0.20
spotlessVersion=7.0.2
spotlessVersion=6.25.0
shadowJarVersion=8.3.2
buildconfigVersion=5.5.0
grgitVersion=5.2.2
-8
View File
@@ -1,8 +0,0 @@
VITE_FIRMWARE_TOOL_URL=https://fw-tool-api.slimevr.io
VITE_FIRMWARE_TOOL_S3_URL=https://fw-tool-bucket.slimevr.io
FIRMWARE_TOOL_SCHEMA_URL=https://fw-tool-api.slimevr.io/api-json
# VITE_FIRMWARE_TOOL_URL=http://localhost:3000
# VITE_FIRMWARE_TOOL_S3_URL=http://localhost:9000
# FIRMWARE_TOOL_SCHEMA_URL=http://localhost:3000/api-json
+51
View File
@@ -0,0 +1,51 @@
{
"env": {
"browser": true,
"es2021": true,
"jest": true
},
"extends": ["eslint:recommended", "plugin:@typescript-eslint/recommended", "plugin:@dword-design/import-alias/recommended"],
"parser": "@typescript-eslint/parser",
"parserOptions": {
"ecmaFeatures": {
"jsx": true
},
"ecmaVersion": "latest",
"sourceType": "module"
},
"plugins": ["react-hooks", "@typescript-eslint"],
"rules": {
"react/react-in-jsx-scope": "off",
"react/prop-types": "off",
"spaced-comment": "error",
"quotes": ["error", "single"],
"no-duplicate-imports": "error",
"no-inline-styles": "off",
"@typescript-eslint/no-explicit-any": "off",
"react/no-unescaped-entities": "off",
"camelcase": "error",
"@typescript-eslint/no-unused-vars": [
"warn",
{
"argsIgnorePattern": "^_",
"varsIgnorePattern": "^_"
}
],
"@dword-design/import-alias/prefer-alias": [
"error",
{
"alias": {
"@": "./src/"
}
}
]
},
"settings": {
"import/resolver": {
"typescript": {}
},
"react": {
"version": "detect"
}
}
}
-1
View File
@@ -28,7 +28,6 @@ yarn-error.log*
# vite
/dist
/stats.html
vite.config.ts.timestamp*
# eslint
.eslintcache
+1 -1
View File
@@ -1,5 +1,5 @@
export default {
'**/*.{ts,tsx}': () => 'tsc -p tsconfig.json --noEmit',
'src/**/*.{js,jsx,ts,tsx}': 'eslint --max-warnings=0 --no-warn-ignored --cache --fix',
'**/*.{js,jsx,ts,tsx}': 'eslint --max-warnings=0 --cache --fix',
'**/*.{js,jsx,ts,tsx,css,md,json}': 'prettier --write',
};
-79
View File
@@ -1,79 +0,0 @@
import { FlatCompat } from '@eslint/eslintrc';
import eslint from '@eslint/js';
import globals from 'globals';
import tseslint from 'typescript-eslint';
const compat = new FlatCompat();
export const gui = [
eslint.configs.recommended,
...tseslint.configs.recommended,
...compat.extends('plugin:@dword-design/import-alias/recommended'),
...compat.plugins('eslint-plugin-react-hooks'),
// Add import-alias rule inside compat because plugin doesn't like flat configs
...compat.config({
rules: {
'@dword-design/import-alias/prefer-alias': [
'error',
{
alias: {
'@': './src/',
},
},
],
},
}),
{
languageOptions: {
ecmaVersion: 'latest',
sourceType: 'module',
parser: tseslint.parser,
parserOptions: {
ecmaFeatures: {
jsx: true,
},
},
globals: {
...globals.browser,
...globals.jest,
},
},
files: ['src/**/*.{js,jsx,ts,tsx,json}'],
plugins: {
'@typescript-eslint': tseslint.plugin,
},
rules: {
'react/react-in-jsx-scope': 'off',
'react/prop-types': 'off',
'spaced-comment': 'error',
quotes: ['error', 'single'],
'no-duplicate-imports': 'error',
'no-inline-styles': 'off',
'@typescript-eslint/no-explicit-any': 'off',
'react/no-unescaped-entities': 'off',
camelcase: 'error',
'@typescript-eslint/no-unused-vars': [
'warn',
{
argsIgnorePattern: '^_',
varsIgnorePattern: '^_',
ignoreRestSiblings: true,
},
],
},
settings: {
'import/resolver': {
typescript: {},
},
react: {
version: 'detect',
},
},
},
// Global ignore
{
ignores: ['**/firmware-tool-api/'],
},
];
export default gui;
-28
View File
@@ -1,28 +0,0 @@
import {
generateSchemaTypes,
generateReactQueryComponents,
} from '@openapi-codegen/typescript';
import { defineConfig } from '@openapi-codegen/cli';
import dotenv from 'dotenv';
dotenv.config()
export default defineConfig({
firmwareTool: {
from: {
source: 'url',
url: process.env.FIRMWARE_TOOL_SCHEMA_URL ?? 'http://localhost:3000/api-json',
},
outputDir: 'src/firmware-tool-api',
to: async (context) => {
const filenamePrefix = 'firmwareTool';
const { schemasFiles } = await generateSchemaTypes(context, {
filenamePrefix,
});
await generateReactQueryComponents(context, {
filenamePrefix,
schemasFiles,
});
},
},
});
+3 -18
View File
@@ -2,17 +2,13 @@
"name": "slimevr-ui",
"version": "0.5.1",
"private": true,
"type": "module",
"dependencies": {
"@fluent/bundle": "^0.18.0",
"@fluent/react": "^0.15.2",
"@fontsource/poppins": "^5.1.0",
"@formatjs/intl-localematcher": "^0.2.32",
"@hookform/resolvers": "^3.6.0",
"@react-three/drei": "^9.114.3",
"@react-three/fiber": "^8.17.10",
"@tailwindcss/typography": "^0.5.15",
"@tanstack/react-query": "^5.48.0",
"@tauri-apps/api": "^2.0.2",
"@tauri-apps/plugin-dialog": "^2.0.0",
"@tauri-apps/plugin-fs": "^2.0.0",
@@ -30,18 +26,15 @@
"react-error-boundary": "^4.0.13",
"react-helmet": "^6.1.0",
"react-hook-form": "^7.53.0",
"react-markdown": "^9.0.1",
"react-modal": "^3.16.1",
"react-responsive": "^10.0.0",
"react-router-dom": "^6.26.2",
"remark-gfm": "^4.0.0",
"semver": "^7.6.3",
"solarxr-protocol": "file:../solarxr-protocol",
"three": "^0.163.0",
"ts-pattern": "^5.4.0",
"typescript": "^5.6.3",
"use-double-tap": "^1.3.6",
"yup": "^1.4.0"
"use-double-tap": "^1.3.6"
},
"scripts": {
"start": "vite --force",
@@ -53,15 +46,10 @@
"lint:fix": "tsc --noEmit && eslint --fix --max-warnings=0 \"src/**/*.{js,jsx,ts,tsx,json}\" && pnpm run format",
"format": "prettier --write \"src/**/*.{js,jsx,ts,tsx,css,scss,md,json}\"",
"preview-vite": "vite preview",
"javaversion-build": "cd src-tauri/src/ && javac JavaVersion.java && jar cvfe JavaVersion.jar JavaVersion JavaVersion.class",
"gen:javaversion": "cd src-tauri/src/ && javac JavaVersion.java && jar cvfe JavaVersion.jar JavaVersion JavaVersion.class",
"gen:firmware-tool": "openapi-codegen gen firmwareTool",
"gen:icons": "tauri icon --ios-color '#663499' src-tauri/icons/icon.svg"
"javaversion-build": "cd src-tauri/src/ && javac JavaVersion.java && jar cvfe JavaVersion.jar JavaVersion JavaVersion.class"
},
"devDependencies": {
"@dword-design/eslint-plugin-import-alias": "^4.0.9",
"@openapi-codegen/cli": "^2.0.2",
"@openapi-codegen/typescript": "^8.0.2",
"@tailwindcss/forms": "^0.5.9",
"@tauri-apps/cli": "^2.0.2",
"@types/file-saver": "^2.0.7",
@@ -76,7 +64,6 @@
"@vitejs/plugin-react": "^4.3.2",
"autoprefixer": "^10.4.20",
"cross-env": "^7.0.3",
"dotenv": "^16.4.5",
"eslint": "^8.57.1",
"eslint-config-airbnb": "^19.0.4",
"eslint-import-resolver-typescript": "^3.6.3",
@@ -84,14 +71,12 @@
"eslint-plugin-jsx-a11y": "^6.10.0",
"eslint-plugin-react": "^7.37.1",
"eslint-plugin-react-hooks": "^4.6.2",
"globals": "^15.10.0",
"prettier": "^3.3.3",
"rollup-plugin-visualizer": "^5.12.0",
"sass": "^1.79.4",
"spdx-satisfies": "^5.0.1",
"tailwind-gradient-mask-image": "^1.2.0",
"tailwindcss": "^3.4.13",
"vite": "^5.4.8",
"typescript-eslint": "^8.8.0"
"vite": "^5.4.8"
}
}
+49 -274
View File
@@ -5,13 +5,8 @@
# translators on what it means
## Websocket (server) status
websocket-connecting = Loading...
websocket-connection_lost = The server crashed!
websocket-connection_lost-desc = It looks like the SlimeVR server crashed. Check the logs and restart the program
websocket-timedout = Could not connect to the server
websocket-timedout-desc = It looks like the SlimeVR server crashed or timed out. Check the logs and restart the program
websocket-error-close = Exit SlimeVR
websocket-error-logs = Open the logs Folder
websocket-connecting = Connecting to the server
websocket-connection_lost = Connection lost to the server. Trying to reconnect...
## Update notification
version_update-title = New version available: { $version }
@@ -49,8 +44,8 @@ body_part-LEFT_HAND = Left hand
body_part-LEFT_UPPER_LEG = Left thigh
body_part-LEFT_LOWER_LEG = Left ankle
body_part-LEFT_FOOT = Left foot
body_part-LEFT_THUMB_METACARPAL = Left thumb metacarpal
body_part-LEFT_THUMB_PROXIMAL = Left thumb proximal
body_part-LEFT_THUMB_INTERMEDIATE = Left thumb intermediate
body_part-LEFT_THUMB_DISTAL = Left thumb distal
body_part-LEFT_INDEX_PROXIMAL = Left index proximal
body_part-LEFT_INDEX_INTERMEDIATE = Left index intermediate
@@ -64,8 +59,8 @@ body_part-LEFT_RING_DISTAL = Left ring distal
body_part-LEFT_LITTLE_PROXIMAL = Left little proximal
body_part-LEFT_LITTLE_INTERMEDIATE = Left little intermediate
body_part-LEFT_LITTLE_DISTAL = Left little distal
body_part-RIGHT_THUMB_METACARPAL = Right thumb metacarpal
body_part-RIGHT_THUMB_PROXIMAL = Right thumb proximal
body_part-RIGHT_THUMB_INTERMEDIATE = Right thumb intermediate
body_part-RIGHT_THUMB_DISTAL = Right thumb distal
body_part-RIGHT_INDEX_PROXIMAL = Right index proximal
body_part-RIGHT_INDEX_INTERMEDIATE = Right index intermediate
@@ -80,27 +75,6 @@ body_part-RIGHT_LITTLE_PROXIMAL = Right little proximal
body_part-RIGHT_LITTLE_INTERMEDIATE = Right little intermediate
body_part-RIGHT_LITTLE_DISTAL = Right little distal
## BoardType
board_type-UNKNOWN = Unknown
board_type-NODEMCU = NodeMCU
board_type-CUSTOM = Custom Board
board_type-WROOM32 = WROOM32
board_type-WEMOSD1MINI = Wemos D1 Mini
board_type-TTGO_TBASE = TTGO T-Base
board_type-ESP01 = ESP-01
board_type-SLIMEVR = SlimeVR
board_type-LOLIN_C3_MINI = Lolin C3 Mini
board_type-BEETLE32C3 = Beetle ESP32-C3
board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
board_type-OWOTRACK = owoTrack
board_type-WRANGLER = Wrangler Joycons
board_type-MOCOPI = Sony Mocopi
board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
board_type-HARITORA = Haritora
board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU Glove
## Proportions
skeleton_bone-NONE = None
skeleton_bone-HEAD = Head Shift
@@ -130,14 +104,11 @@ skeleton_bone-ELBOW_OFFSET = Elbow Offset
## Tracker reset buttons
reset-reset_all = Reset all proportions
reset-reset_all_warning-v2 =
<b>Warning:</b> Your proportions will be reset to defaults scaled to your configured height.
reset-reset_all_warning =
<b>Warning:</b> This will reset your proportions to being just based on your height.
Are you sure you want to do this?
reset-reset_all_warning-reset = Reset proportions
reset-reset_all_warning-cancel = Cancel
reset-reset_all_warning_default-v2 =
<b>Warning:</b> Your height has not been configured, your proportions will be reset to defaults with the default height.
Are you sure you want to do this?
reset-full = Full Reset
reset-mounting = Reset Mounting
@@ -282,11 +253,6 @@ tracker-settings-name_section-label = Tracker name
tracker-settings-forget = Forget tracker
tracker-settings-forget-description = Removes the tracker from the SlimeVR Server and prevent it from connecting to it until the server is restarted. The configuration of the tracker won't be lost.
tracker-settings-forget-label = Forget tracker
tracker-settings-update-unavailable = Cannot be updated (DIY)
tracker-settings-update-up_to_date = Up to date
tracker-settings-update-available = { $versionName } is now available
tracker-settings-update = Update now
tracker-settings-update-title = Firmware version
## Tracker part card info
tracker-part_card-no_name = No name
@@ -359,7 +325,6 @@ settings-sidebar-utils = Utilities
settings-sidebar-serial = Serial console
settings-sidebar-appearance = Appearance
settings-sidebar-notifications = Notifications
settings-sidebar-firmware-tool = DIY Firmware Tool
settings-sidebar-advanced = Advanced
## SteamVR settings
@@ -462,11 +427,6 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = Foot-plant rotat
settings-general-fk_settings-leg_fk = Leg tracking
settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Enable feet Mounting Reset by tiptoeing.
settings-general-fk_settings-leg_fk-reset_mounting_feet = Feet Mounting Reset
settings-general-fk_settings-enforce_joint_constraints = Skeletal Limits
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Enforce constraints
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Prevents joints from rotating past their limit
settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Correct with constraints
settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Correct joint rotations when they push past their limit
settings-general-fk_settings-arm_fk = Arm tracking
settings-general-fk_settings-arm_fk-description = Force arms to be tracked from the headset (HMD) even if positional hand data is available.
settings-general-fk_settings-arm_fk-force_arms = Force arms from HMD
@@ -500,6 +460,10 @@ settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Average the k
settings-general-fk_settings-self_localization-title = Mocap mode
settings-general-fk_settings-self_localization-description = Mocap Mode allows the skeleton to roughly track its own position without a headset or other trackers. Note that this requires feet and head trackers to work and is still experimental.
settings-general-fk_settings-vive_emulation-title = Vive emulation
settings-general-fk_settings-vive_emulation-description = Emulate the waist tracker problems that Vive trackers have. This is a joke and makes tracking worse.
settings-general-fk_settings-vive_emulation-label = Enable Vive emulation
## Gesture control settings (tracker tapping)
settings-general-gesture_control = Gesture control
settings-general-gesture_control-subtitle = Tap based resets
@@ -631,16 +595,11 @@ settings-osc-vrchat-description-v1 =
Change settings specific to the OSC Trackers standard used for sending
tracking data to applications without SteamVR (ex. Quest standalone).
Make sure to enable OSC in VRChat via the Action Menu under OSC > Enabled.
To allow receiving HMD and controller data from VRChat, go in your main menu's
settings under Tracking & IK > Allow Sending Head and Wrist VR Tracking OSC Data.
settings-osc-vrchat-enable = Enable
settings-osc-vrchat-enable-description = Toggle the sending and receiving of data.
settings-osc-vrchat-enable-label = Enable
settings-osc-vrchat-oscqueryEnabled = Enable OSCQuery
settings-osc-vrchat-oscqueryEnabled-description =
OSCQuery automatically detects running instances of VRChat and sends them data.
It can also advertise itself to them in order to receive HMD and controller data.
To allow receiving HMD and controller data from VRChat, go in your main menu's settings
under "Tracking & IK" and enable "Allow Sending Head and Wrist VR Tracking OSC Data".
settings-osc-vrchat-oscqueryEnabled-label = Enable OSCQuery
settings-osc-vrchat-network = Network ports
settings-osc-vrchat-network-description-v1 = Set the ports for listening and sending data. Can be left untouched for VRChat.
settings-osc-vrchat-network-port_in =
@@ -682,7 +641,11 @@ settings-osc-vmc-network-address-description = Choose which address to send out
settings-osc-vmc-network-address-placeholder = IPV4 address
settings-osc-vmc-vrm = VRM Model
settings-osc-vmc-vrm-description = Load a VRM model to allow head anchor and enable a higher compatibility with other applications.
settings-osc-vmc-vrm-untitled_model = Untitled model
settings-osc-vmc-vrm-model_unloaded = No model loaded
settings-osc-vmc-vrm-model_loaded = { $titled ->
*[false] Untitled model loaded
[true] Model loaded: { $name }
}
settings-osc-vmc-vrm-file_select = Drag & drop a model to use, or <u>browse</u>
settings-osc-vmc-anchor_hip = Anchor at hips
settings-osc-vmc-anchor_hip-description = Anchor the tracking at the hips, useful for seated VTubing. If disabling, load a VRM model.
@@ -740,7 +703,6 @@ onboarding-wifi_creds-submit = Submit!
onboarding-wifi_creds-ssid =
.label = Wi-Fi name
.placeholder = Enter Wi-Fi name
onboarding-wifi_creds-ssid-required = Wi-Fi name is required
onboarding-wifi_creds-password =
.label = Password
.placeholder = Enter password
@@ -790,7 +752,6 @@ onboarding-connect_tracker-issue-serial = I'm having trouble connecting!
onboarding-connect_tracker-usb = USB Tracker
onboarding-connect_tracker-connection_status-none = Looking for trackers
onboarding-connect_tracker-connection_status-serial_init = Connecting to serial device
onboarding-connect_tracker-connection_status-obtaining_mac_address = Obtaining the tracker mac address
onboarding-connect_tracker-connection_status-provisioning = Sending Wi-Fi credentials
onboarding-connect_tracker-connection_status-connecting = Trying to connect to Wi-Fi
onboarding-connect_tracker-connection_status-looking_for_server = Looking for server
@@ -967,32 +928,45 @@ onboarding-automatic_mounting-put_trackers_on-title = Put on your trackers
onboarding-automatic_mounting-put_trackers_on-description = To calibrate mounting orientations, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.
onboarding-automatic_mounting-put_trackers_on-next = I have all my trackers on
## Tracker manual proportions setupa
## Tracker proportions method choose
onboarding-choose_proportions = What proportion calibration method to use?
# Multiline string
onboarding-choose_proportions-description-v1 = Body proportions are used to know the measurements of your body. They're required to calculate the trackers' positions.
When proportions of your body don't match the ones saved, your tracking precision will be worse and you will notice things like skating or sliding, or your body not matching your avatar well.
<b>You only need to measure your body once!</b> Unless they are wrong or your body has changed, then you don't need to do them again.
onboarding-choose_proportions-auto_proportions = Automatic proportions
# Italicized text
onboarding-choose_proportions-auto_proportions-subtitle = Recommended
onboarding-choose_proportions-auto_proportions-descriptionv3 =
This will guess your proportions by recording a sample of your movements and passing it through an algorithm.
<b>This requires having your headset (HMD) connected to SlimeVR and on your head!</b>
onboarding-choose_proportions-manual_proportions = Manual proportions
# Italicized text
onboarding-choose_proportions-manual_proportions-subtitle = For small touches
onboarding-choose_proportions-manual_proportions-description = This will let you adjust your proportions manually by modifying them directly
onboarding-choose_proportions-export = Export proportions
onboarding-choose_proportions-import = Import proportions
onboarding-choose_proportions-import-success = Imported
onboarding-choose_proportions-import-failed = Failed
onboarding-choose_proportions-file_type = Body proportions file
## Tracker manual proportions setup
onboarding-manual_proportions-back = Go Back to Reset tutorial
onboarding-manual_proportions-title = Manual Body Proportions
onboarding-manual_proportions-precision = Precision adjust
onboarding-manual_proportions-auto = Automatic proportions
onboarding-manual_proportions-ratio = Adjust by ratio groups
onboarding-manual_proportions-fine_tuning_button = Automatically fine tune proportions
onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = Please connect a VR headset to use automatic fine tuning
onboarding-manual_proportions-export = Export proportions
onboarding-manual_proportions-import = Import proportions
onboarding-manual_proportions-import-success = Imported
onboarding-manual_proportions-import-failed = Failed
onboarding-manual_proportions-file_type = Body proportions file
## Tracker automatic proportions setup
onboarding-automatic_proportions-back = Go Back to Manual Proportions
onboarding-automatic_proportions-back = Go Back to Reset tutorial
onboarding-automatic_proportions-title = Measure your body
onboarding-automatic_proportions-description = For SlimeVR trackers to work, we need to know the length of your bones. This short calibration will measure it for you.
onboarding-automatic_proportions-manual = Manual proportions
onboarding-automatic_proportions-prev_step = Previous step
onboarding-automatic_proportions-put_trackers_on-title = Put on your trackers
onboarding-automatic_proportions-put_trackers_on-description = To calibrate your proportions, we're gonna use the trackers you just assigned. Put on all your trackers, you can see which are which in the figure to the right.
onboarding-automatic_proportions-put_trackers_on-next = I have all my trackers on
onboarding-automatic_proportions-requirements-title = Requirements
# Each line of text is a different list item
onboarding-automatic_proportions-requirements-descriptionv2 =
@@ -1002,39 +976,23 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
Your headset is reporting positional data to the SlimeVR server (this generally means having SteamVR running and connected to SlimeVR using SlimeVR's SteamVR driver).
Your tracking is working and is accurately representing your movements (ex. you have performed a full reset and they move the right direction when kicking, bending over, sitting, etc).
onboarding-automatic_proportions-requirements-next = I have read the requirements
onboarding-automatic_proportions-check_height-title-v3 = Measure your headset height
onboarding-automatic_proportions-check_height-description-v2 = Your headset (HMD) height should be slightly less than your full height, as headsets measure your eye height. This measurement will be used as a baseline for your body proportions.
onboarding-automatic_proportions-check_height-title = Check your height
onboarding-automatic_proportions-check_height-description = We use your height as a basis of our measurements by using the headset's (HMD) height as an approximation of your actual height, but it's better to check if they are right yourself!
# All the text is in bold!
onboarding-automatic_proportions-check_height-calculation_warning-v3 = Start measuring while standing <u>upright</u> to measure your height. Be careful to not raise your hands higher than your headset, as they may affect the measurement!
onboarding-automatic_proportions-check_height-calculation_warning = Please press the button while standing <u>upright</u> to calculate your height. You have 3 seconds after you press the button!
onboarding-automatic_proportions-check_height-guardian_tip = If you are using a standalone VR headset, make sure to have your guardian /
boundary turned on so that your height is correct!
onboarding-automatic_proportions-check_height-fetch_height = I'm standing!
# Context is that the height is unknown
onboarding-automatic_proportions-check_height-unknown = Unknown
# Shows an element below it
onboarding-automatic_proportions-check_height-hmd_height2 = Your headset height is:
onboarding-automatic_proportions-check_height-measure-start = Start measuring
onboarding-automatic_proportions-check_height-measure-stop = Stop measuring
onboarding-automatic_proportions-check_height-measure-reset = Retry measuring
onboarding-automatic_proportions-check_height-next_step = Use headset height
onboarding-automatic_proportions-check_floor_height-title = Measure your floor height (optional)
onboarding-automatic_proportions-check_floor_height-description = In some cases, your floor height may not be set correctly by your headset, causing the headset height to be measured as higher than it should be. You can measure the "height" of your floor to correct your headset height.
# All the text is in bold!
onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Start measuring and put a controller against your floor to measure its height. If you are sure that your floor height is correct, you can skip this step.
onboarding-automatic_proportions-check_height-hmd_height1 = Your HMD height is
# Shows an element below it
onboarding-automatic_proportions-check_floor_height-floor_height = Your floor height is:
onboarding-automatic_proportions-check_floor_height-full_height = Your estimated full height is:
onboarding-automatic_proportions-check_floor_height-measure-start = Start measuring
onboarding-automatic_proportions-check_floor_height-measure-stop = Stop measuring
onboarding-automatic_proportions-check_floor_height-measure-reset = Retry measuring
onboarding-automatic_proportions-check_floor_height-skip_step = Skip step and save
onboarding-automatic_proportions-check_floor_height-next_step = Use floor height and save
onboarding-automatic_proportions-check_height-height1 = so your actual height is
onboarding-automatic_proportions-check_height-next_step = They are fine
onboarding-automatic_proportions-start_recording-title = Get ready to move
onboarding-automatic_proportions-start_recording-description = We're now going to record some specific poses and moves. These will be prompted in the next screen. Be ready to start when the button is pressed!
onboarding-automatic_proportions-start_recording-next = Start Recording
onboarding-automatic_proportions-recording-title = REC
onboarding-automatic_proportions-recording-description-p0 = Recording in progress...
onboarding-automatic_proportions-recording-description-p1 = Make the moves shown below:
@@ -1052,14 +1010,12 @@ onboarding-automatic_proportions-recording-timer = { $time ->
[one] 1 second left
*[other] { $time } seconds left
}
onboarding-automatic_proportions-verify_results-title = Verify results
onboarding-automatic_proportions-verify_results-description = Check the results below, do they look correct?
onboarding-automatic_proportions-verify_results-results = Recording results
onboarding-automatic_proportions-verify_results-processing = Processing the result
onboarding-automatic_proportions-verify_results-redo = Redo recording
onboarding-automatic_proportions-verify_results-confirm = They're correct
onboarding-automatic_proportions-done-title = Body measured and saved.
onboarding-automatic_proportions-done-description = Your body proportions' calibration is complete!
onboarding-automatic_proportions-error_modal-v2 =
@@ -1068,27 +1024,6 @@ onboarding-automatic_proportions-error_modal-v2 =
Please <docs>check the docs</docs> or join our <discord>Discord</discord> for help ^_^
onboarding-automatic_proportions-error_modal-confirm = Understood!
onboarding-automatic_proportions-smol_warning =
Your configured height of { $height } is smaller than the minimum accepted height of { $minHeight }.
<b>Please redo the measurements and ensure they are correct.</b>
onboarding-automatic_proportions-smol_warning-cancel = Go back
## Tracker scaled proportions setup
onboarding-scaled_proportions-title = Scaled proportions
onboarding-scaled_proportions-description = For SlimeVR trackers to work, we need to know the length of your bones. This will use an average proportion and scale it based on your height.
onboarding-scaled_proportions-manual_height-title = Configure your height
onboarding-scaled_proportions-manual_height-description-v2 = This height will be used as a baseline for your body proportions.
onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR is not currently connected to SlimeVR, so measurements can't be based on your headset. <b>Proceed at your own risk or check the docs!</b>
onboarding-scaled_proportions-manual_height-height-v2 = Your full height is
onboarding-scaled_proportions-manual_height-estimated_height = Your estimated headset height is:
onboarding-scaled_proportions-manual_height-next_step = Continue and save
## Tracker scaled proportions reset
onboarding-scaled_proportions-reset_proportion-title = Reset your body proportions
onboarding-scaled_proportions-reset_proportion-description = To set your body proportions based on your height, you need to now reset all of your proportions. This will clear any proportions you have configured and provide a baseline configuration.
onboarding-scaled_proportions-done-title = Body proportions set
onboarding-scaled_proportions-done-description = Your body proportions should now be configured based on your height.
## Home
home-no_trackers = No trackers detected or assigned
@@ -1109,166 +1044,6 @@ status_system-StatusSteamVRDisconnected = { $type ->
status_system-StatusTrackerError = The { $trackerName } tracker has an error.
status_system-StatusUnassignedHMD = The VR headset should be assigned as a head tracker.
## Firmware tool globals
firmware_tool-next_step = Next Step
firmware_tool-previous_step = Previous Step
firmware_tool-ok = Looks good
firmware_tool-retry = Retry
firmware_tool-loading = Loading...
## Firmware tool Steps
firmware_tool = DIY Firmware tool
firmware_tool-description =
Allows you to configure and flash your DIY trackers
firmware_tool-not_available = Oops, the firmware tool is not available at the moment. Come back later!
firmware_tool-not_compatible = The firmware tool is not compatible with this version of the server. Please update your server!
firmware_tool-board_step = Select your Board
firmware_tool-board_step-description = Select one of the boards listed below.
firmware_tool-board_pins_step = Check the pins
firmware_tool-board_pins_step-description =
Please verify that the selected pins are correct.
If you followed the SlimeVR documentation the defaults values should be correct
firmware_tool-board_pins_step-enable_led = Enable LED
firmware_tool-board_pins_step-led_pin =
.label = LED Pin
.placeholder = Enter the pin address of the LED
firmware_tool-board_pins_step-battery_type = Select the battery type
firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = External battery
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Internal battery
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = Internal MCP3021
firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
firmware_tool-board_pins_step-battery_sensor_pin =
.label = Battery sensor Pin
.placeholder = Enter the pin address of battery sensor
firmware_tool-board_pins_step-battery_resistor =
.label = Battery Resistor (Ohms)
.placeholder = Enter the value of battery resistor
firmware_tool-board_pins_step-battery_shield_resistor-0 =
.label = Battery Shield R1 (Ohms)
.placeholder = Enter the value of Battery Shield R1
firmware_tool-board_pins_step-battery_shield_resistor-1 =
.label = Battery Shield R2 (Ohms)
.placeholder = Enter the value of Battery Shield R2
firmware_tool-add_imus_step = Declare your IMUs
firmware_tool-add_imus_step-description =
Please add the IMUs that your tracker has
If you followed the SlimeVR documentation the defaults values should be correct
firmware_tool-add_imus_step-imu_type-label = IMU type
firmware_tool-add_imus_step-imu_type-placeholder = Select the type of IMU
firmware_tool-add_imus_step-imu_rotation =
.label = IMU Rotation (deg)
.placeholder = Rotation angle of the IMU
firmware_tool-add_imus_step-scl_pin =
.label = SCL Pin
.placeholder = Pin address of SCL
firmware_tool-add_imus_step-sda_pin =
.label = SDA Pin
.placeholder = Pin address of SDA
firmware_tool-add_imus_step-int_pin =
.label = INT Pin
.placeholder = Pin address of INT
firmware_tool-add_imus_step-optional_tracker =
.label = Optional tracker
firmware_tool-add_imus_step-show_less = Show Less
firmware_tool-add_imus_step-show_more = Show More
firmware_tool-add_imus_step-add_more = Add more IMUs
firmware_tool-select_firmware_step = Select the firmware version
firmware_tool-select_firmware_step-description =
Please choose what version of the firmware you want to use
firmware_tool-select_firmware_step-show-third-party =
.label = Show third party firmwares
firmware_tool-flash_method_step = Flashing Method
firmware_tool-flash_method_step-description =
Please select the flashing method you want to use
firmware_tool-flash_method_step-ota =
.label = OTA
.description = Use the over the air method. Your tracker will use the Wi-Fi to update it's firmware. Works only on already setup trackers.
firmware_tool-flash_method_step-serial =
.label = Serial
.description = Use a USB cable to update your tracker.
firmware_tool-flashbtn_step = Press the boot btn
firmware_tool-flashbtn_step-description = Before going into the next step there is a few things you need to do
firmware_tool-flashbtn_step-board_SLIMEVR = Turn off the tracker, remove the case (if any), connect a USB cable to this computer, then do one of the following steps according to your SlimeVR board revision:
firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Turn on the tracker while shorting the second rectangular FLASH pad from the edge on the top side of the board, and the metal shield of the microcontroller
firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Turn on the tracker while shorting the circular FLASH pad on the top side of the board, and the metal shield of the microcontroller
firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Turn on the tracker while pushing in the FLASH button on the top side of the board
firmware_tool-flashbtn_step-board_OTHER = Before flashing you will probably need to put the tracker into bootloader mode.
Most of the time it means pressing the boot button on the board before the flashing process starts.
If the flashing process timeout at the begining of the flashing it probably means that the tracker was not in bootloader mode
Please refer to the flashing instructions of your board to know how to turn on the boatloader mode
firmware_tool-flash_method_ota-devices = Detected OTA Devices:
firmware_tool-flash_method_ota-no_devices = There are no boards that can be updated using OTA, make sure you selected the correct board type
firmware_tool-flash_method_serial-wifi = Wi-Fi Credentials:
firmware_tool-flash_method_serial-devices-label = Detected Serial Devices:
firmware_tool-flash_method_serial-devices-placeholder = Select a serial device
firmware_tool-flash_method_serial-no_devices = There are no compatible serial devices detected, make sure the tracker is plugged in
firmware_tool-build_step = Building
firmware_tool-build_step-description =
The firmware is building, please wait
firmware_tool-flashing_step = Flashing
firmware_tool-flashing_step-description =
Your trackers are flashing, please follow the instructions on the screen
firmware_tool-flashing_step-warning = Do not unplug or restart the tracker during the upload process unless told to, it may make your board unusable
firmware_tool-flashing_step-flash_more = Flash more trackers
firmware_tool-flashing_step-exit = Exit
## firmware tool build status
firmware_tool-build-CREATING_BUILD_FOLDER = Creating the build folder
firmware_tool-build-DOWNLOADING_FIRMWARE = Downloading the firmware
firmware_tool-build-EXTRACTING_FIRMWARE = Extracting the firmware
firmware_tool-build-SETTING_UP_DEFINES = Configuring the defines
firmware_tool-build-BUILDING = Building the firmware
firmware_tool-build-SAVING = Saving the build
firmware_tool-build-DONE = Build Complete
firmware_tool-build-ERROR = Unable to build the firmware
## Firmware update status
firmware_update-status-DOWNLOADING = Downloading the firmware
firmware_update-status-NEED_MANUAL_REBOOT = Please restart the tracker
firmware_update-status-AUTHENTICATING = Authenticating with the mcu
firmware_update-status-UPLOADING = Uploading the firmware
firmware_update-status-SYNCING_WITH_MCU = Syncing with the mcu
firmware_update-status-REBOOTING = Applying the update
firmware_update-status-PROVISIONING = Setting Wi-Fi credentials
firmware_update-status-DONE = Update complete!
firmware_update-status-ERROR_DEVICE_NOT_FOUND = Could not find the device
firmware_update-status-ERROR_TIMEOUT = The update process timed out
firmware_update-status-ERROR_DOWNLOAD_FAILED = Could not download the firmware
firmware_update-status-ERROR_AUTHENTICATION_FAILED = Could not authenticate with the mcu
firmware_update-status-ERROR_UPLOAD_FAILED = Could not upload the firmware
firmware_update-status-ERROR_PROVISIONING_FAILED = Could not set the Wi-Fi credentials
firmware_update-status-ERROR_UNSUPPORTED_METHOD = The update method is not supported
firmware_update-status-ERROR_UNKNOWN = Unknown error
## Dedicated Firmware Update Page
firmware_update-title = Firmware update
firmware_update-devices = Available Devices
firmware_update-devices-description = Please select the trackers you want to update to the latest version of SlimeVR firmware
firmware_update-no_devices = Plase make sure that the trackers you want to update are ON and connected to the Wi-Fi!
firmware_update-changelog-title = Updating to {$version}
firmware_update-looking_for_devices = Looking for devices to update...
firmware_update-retry = Retry
firmware_update-update = Update Selected Trackers
firmware_update-exit = Exit
## Tray Menu
tray_menu-show = Show
tray_menu-hide = Hide
+8 -32
View File
@@ -50,20 +50,6 @@ body_part-LEFT_UPPER_LEG = Muslo izquierdo
body_part-LEFT_LOWER_LEG = Tobillo izquierdo
body_part-LEFT_FOOT = Pie izquierdo
## BoardType
board_type-UNKNOWN = Desconocido
board_type-NODEMCU = NodeMCU
board_type-CUSTOM = Placa personalizada
board_type-WROOM32 = WROOM32
board_type-WEMOSD1MINI = Wemos D1 Mini
board_type-TTGO_TBASE = TTGO T-Base
board_type-ESP01 = ESP-01
board_type-SLIMEVR = SlimeVR
board_type-LOLIN_C3_MINI = Lolin C3 Mini
board_type-BEETLE32C3 = Beetle ESP32-C3
board_type-ES32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
## Proportions
skeleton_bone-NONE = Nada
@@ -511,9 +497,9 @@ settings-general-interface-dev_mode = Modo desarrollador
settings-general-interface-dev_mode-description = Este modo puede ser útil si es que necesitas información a fondo o para un nivel de interacción más avanzado con los sensores conectados.
settings-general-interface-dev_mode-label = Modo desarrollador
settings-general-interface-theme = Tema de color
settings-general-interface-show-navbar-onboarding = Mostrar «{ navbar-onboarding }» en la barra de navegación
settings-general-interface-show-navbar-onboarding = Mostrar "{ navbar-onboarding }" en la barra de navegación
settings-general-interface-show-navbar-onboarding-description = Esto cambia si el botón "{ navbar-onboarding }" se muestra en la barra de navegación.
settings-general-interface-show-navbar-onboarding-label = Mostrar «{ navbar-onboarding }»
settings-general-interface-show-navbar-onboarding-label = Mostrar "{ navbar-onboarding }"
settings-general-interface-lang = Selecciona un idioma
settings-general-interface-lang-description = Cambia el idioma que quieras usar.
settings-general-interface-lang-placeholder = Selecciona el idioma a utilizar
@@ -660,7 +646,12 @@ settings-osc-vmc-network-address-description = Establece la dirección donde se
settings-osc-vmc-network-address-placeholder = Dirección IPv4
settings-osc-vmc-vrm = Modelo VRM
settings-osc-vmc-vrm-description = Carga un modelo VRM para permitir el anclaje de cabeza y habilitar una mejor compatibilidad con otras aplicaciones
settings-osc-vmc-vrm-untitled_model = Modelo sin nombre
settings-osc-vmc-vrm-model_unloaded = Ningún modelo cargado
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] Modelo cargado: { $name }
*[other] Modelo sin nombre cargado
}
settings-osc-vmc-vrm-file_select = Arrastra y suelta un modelo para usar, o <u>selecciona uno</u>.
settings-osc-vmc-anchor_hip = Anclaje por cadera
settings-osc-vmc-anchor_hip-description = Anclar el tracking a la cadera, útil para hacer de VTuber sentado. Si lo desactivas, carga un modelo VRM.
@@ -1105,21 +1096,6 @@ status_system-StatusSteamVRDisconnected =
status_system-StatusTrackerError = El tracker { $trackerName } tiene un error.
status_system-StatusUnassignedHMD = El casco de RV debe ser asignado como un sensor de cabeza.
## Firmware tool globals
## Firmware tool Steps
## firmware tool build status
## Firmware update status
## Dedicated Firmware Update Page
## Tray Menu
tray_menu-show = Mostrar
+9 -9
View File
@@ -81,7 +81,6 @@ skeleton_bone-ELBOW_OFFSET = Compensacion de los codos
## Tracker reset buttons
reset-reset_all = Reiniciar todas las proporciones
reset-reset_all_warning-cancel = Cancelar
reset-full = Reinicio completo
reset-mounting = Reiniciar montura
reset-yaw = Restablecimiento horizontal
@@ -143,10 +142,8 @@ widget-developer_mode-more_info = Más información
## Widget: IMU Visualizer
widget-imu_visualizer = Rotación
widget-imu_visualizer-hide = Ocultar
widget-imu_visualizer-rotation_raw = Sin filtrar
widget-imu_visualizer-rotation_preview = Previsualización
widget-imu_visualizer-position = Posición
## Widget: Skeleton Visualizer
@@ -201,7 +198,6 @@ tracker-infos-hardware_identifier = ID de hardware
tracker-infos-imu = Sensor IMU
tracker-infos-board_type = Placa principal
tracker-infos-network_version = Versión de protocolo
tracker-infos-magnetometer = Magnetómetro
## Tracker settings
@@ -221,7 +217,6 @@ tracker-settings-drift_compensation_section-edit = Permitir compensación de dri
tracker-settings-name_section = Nombre del tracker
tracker-settings-name_section-description = Dale un sobrenombre lindo :)
tracker-settings-name_section-placeholder = Pata izquierda del Eevee
tracker-settings-name_section-label = Nombre del tracker
tracker-settings-forget = Olvidar tracker
tracker-settings-forget-description = Elimina el tracker del servidor SlimeVR y evita que se conecte a él hasta que se reinicie el servidor. La configuración del tracker no se perderá.
tracker-settings-forget-label = Olvidar tracker
@@ -300,7 +295,6 @@ settings-sidebar-utils = Utilidades
settings-sidebar-serial = Consola serial
settings-sidebar-appearance = Apariencia
settings-sidebar-notifications = Notificaciones
settings-sidebar-advanced = Avanzado
## SteamVR settings
@@ -428,9 +422,9 @@ settings-general-gesture_control-description = Permite que los reinicios se acti
# $amount (Number) - Amount of taps (touches to the tracker's case)
settings-general-gesture_control-taps =
{ $amount ->
[one] 1 toque
[many] { $amount } toques
*[other] { $amount } toques
[one] toque
[many] toques
*[other] toques
}
# This is a unit: 3 trackers, 2 trackers, 1 tracker
# $amount (Number) - Amount of trackers
@@ -604,6 +598,12 @@ settings-osc-vmc-network-address-description = Elige la dirección a la que se e
settings-osc-vmc-network-address-placeholder = Dirección IPV4
settings-osc-vmc-vrm = Modelo VRM
settings-osc-vmc-vrm-description = Cargar un modelo VRM para permitir el anclaje de la cabeza y posibilitar una mayor compatibilidad con otras aplicaciones.
settings-osc-vmc-vrm-model_unloaded = No hay modelo cargado
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] Modelo cargado: { $name }
*[false] Modelo sin título cargado
}
settings-osc-vmc-vrm-file_select = Arrastre y suelte un modelo para utilizarlo, o <u>busquelo</u>
settings-osc-vmc-anchor_hip = Anclar a la cadera
settings-osc-vmc-anchor_hip-description = Ancla el tracking a la cadera, útil para VTubing sentado. Si se deshabilita, carga un modelo VRM.
+15 -106
View File
@@ -49,50 +49,6 @@ body_part-LEFT_HAND = Main gauche
body_part-LEFT_UPPER_LEG = Cuisse gauche
body_part-LEFT_LOWER_LEG = Cheville gauche
body_part-LEFT_FOOT = Pied gauche
body_part-LEFT_THUMB_METACARPAL = Métacarpien du pouce gauche
body_part-LEFT_THUMB_PROXIMAL = Pouce gauche proximal
body_part-LEFT_THUMB_DISTAL = Pouce gauche distal
body_part-LEFT_INDEX_PROXIMAL = Index gauche proximal
body_part-LEFT_INDEX_INTERMEDIATE = Index gauche intermédiaire
body_part-LEFT_INDEX_DISTAL = Index gauche distal
body_part-LEFT_MIDDLE_PROXIMAL = Majeur gauche proximal
body_part-LEFT_MIDDLE_INTERMEDIATE = Majeur gauche intermédiaire
body_part-LEFT_MIDDLE_DISTAL = Majeur gauche distal
body_part-LEFT_RING_PROXIMAL = Annulaire gauche proximal
body_part-LEFT_RING_INTERMEDIATE = Annulaire gauche intermédiaire
body_part-LEFT_RING_DISTAL = Annulaire gauche distal
body_part-LEFT_LITTLE_PROXIMAL = Auriculaire gauche proximal
body_part-LEFT_LITTLE_INTERMEDIATE = Auriculaire gauche intermédiaire
body_part-LEFT_LITTLE_DISTAL = Auriculaire gauche distal
body_part-RIGHT_THUMB_METACARPAL = Métacarpien du pouce droit
body_part-RIGHT_THUMB_PROXIMAL = Pouce droit proximal
body_part-RIGHT_THUMB_DISTAL = Pouce droit distal
body_part-RIGHT_INDEX_PROXIMAL = Index droit proximal
body_part-RIGHT_INDEX_INTERMEDIATE = Index droit intermédiaire
body_part-RIGHT_INDEX_DISTAL = Index droit distal
body_part-RIGHT_MIDDLE_PROXIMAL = Majeur droit proximal
body_part-RIGHT_MIDDLE_INTERMEDIATE = Majeur droit intermédiaire
body_part-RIGHT_MIDDLE_DISTAL = Majeur droit distal
body_part-RIGHT_RING_PROXIMAL = Annulaire droit proximal
body_part-RIGHT_RING_INTERMEDIATE = Annulaire droit intermédiaire
body_part-RIGHT_RING_DISTAL = Annulaire droit distal
body_part-RIGHT_LITTLE_PROXIMAL = Auriculaire droit proximal
body_part-RIGHT_LITTLE_INTERMEDIATE = Auriculaire droit intermédiaire
body_part-RIGHT_LITTLE_DISTAL = Auriculaire droit distal
## BoardType
board_type-UNKNOWN = Inconnu
board_type-NODEMCU = NodeMCU
board_type-CUSTOM = Carte personnalisée
board_type-WROOM32 = WROOM32
board_type-WEMOSD1MINI = Wemos D1 Mini
board_type-TTGO_TBASE = TTGO T-Base
board_type-ESP01 = ESP-01
board_type-SLIMEVR = SlimeVR
board_type-LOLIN_C3_MINI = Lolin C3 Mini
board_type-BEETLE32C3 = Beetle ESP32-C3
board_type-ES32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
## Proportions
@@ -130,10 +86,6 @@ reset-reset_all_warning =
Êtes-vous sûr de vouloir faire cela ?
reset-reset_all_warning-reset = Réinitialiser les proportions
reset-reset_all_warning-cancel = Annuler
reset-reset_all_warning_default =
<b>Avertissement:</b> Vous n’avez actuellement pas défini votre taille, ce qui
fera en sorte que les proportions seront basées sur une hauteur par défaut.
Êtes-vous sûr de vouloir faire cela ?
reset-full = Réinitialisation complète
reset-mounting = Réinitialiser l'alignement
reset-yaw = Réinitialisation horizontale
@@ -252,7 +204,6 @@ tracker-infos-url = URL du capteur
tracker-infos-version = Version du firmware
tracker-infos-hardware_rev = Révision du hardware
tracker-infos-hardware_identifier = ID Matériel
tracker-infos-data_support = Prise en charge de données
tracker-infos-imu = Capteur IMU
tracker-infos-board_type = Carte principale
tracker-infos-network_version = Version du protocole
@@ -293,11 +244,6 @@ tracker-settings-name_section-label = Nom personalisé
tracker-settings-forget = Oublier capteur
tracker-settings-forget-description = Supprime le capteur du serveur SlimeVR et l’empêche de s’y connecter jusqu’à ce que le serveur soit redémarré. La configuration du capteur ne sera pas perdue.
tracker-settings-forget-label = Oublier capteur
tracker-settings-update-unavailable = Ne peut pas être mis à jour (DIY)
tracker-settings-update-up_to_date = À jour
tracker-settings-update-available = { $versionName } est maintenant disponible
tracker-settings-update = Mettre à jour maintenant
tracker-settings-update-title = Version du firmware
## Tracker part card info
@@ -373,7 +319,6 @@ settings-sidebar-utils = Utilitaires
settings-sidebar-serial = Console série
settings-sidebar-appearance = Apparence
settings-sidebar-notifications = Notifications
settings-sidebar-firmware-tool = Outil de firmware DIY
settings-sidebar-advanced = Avancé
## SteamVR settings
@@ -478,7 +423,6 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = La correction de
settings-general-fk_settings-leg_fk = Capture des jambes
settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Activer la réinitialisation de l'alignement des pieds en allant sur la pointe des pieds.
settings-general-fk_settings-leg_fk-reset_mounting_feet = Réinitialisation de l'alignement des pieds
settings-general-fk_settings-enforce_joint_constraints = Limites squelettiques
settings-general-fk_settings-arm_fk = Capture des bras
settings-general-fk_settings-arm_fk-description = Changez la façon dont les bras sont captés.
settings-general-fk_settings-arm_fk-force_arms = Forcer les bras en provenance du casque VR
@@ -701,6 +645,12 @@ settings-osc-vmc-network-address-description = Choisissez l'adresse vers laquell
settings-osc-vmc-network-address-placeholder = Adresse IPv4
settings-osc-vmc-vrm = Modèle VRM
settings-osc-vmc-vrm-description = Chargez un modèle VRM pour permettre l'ancrage à la tête et permettre une plus grande compatibilité avec d'autres applications
settings-osc-vmc-vrm-model_unloaded = Aucun modèle chargé
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] Modèle chargé : { $name }
*[other] Modèle sans nom chargé
}
settings-osc-vmc-vrm-file_select = Glissez et déposez un modèle à utiliser, ou <u>parcourir</u>.
settings-osc-vmc-anchor_hip = Ancrage aux hanches
settings-osc-vmc-anchor_hip-description = Ancrer la capture des mouvements aux hanches, utile pour le VTubing assis.
@@ -1070,11 +1020,20 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
Votre casque envoie sa position au serveur SlimeVR (cela signifie généralement que SteamVR est ouvert et connecté à SlimeVR en utilisant le pilote SteamVR de SlimeVR).
La capture des mouvements fonctionne et représente correctement vos mouvements (ex. vous avez effectué une réinitialisation complète des capteurs et ils bougent dans le bon sens lorsque vous donnez des coups de pieds, vous penchez, vous assoyez, etc).
onboarding-automatic_proportions-requirements-next = J'ai lu les exigences
onboarding-automatic_proportions-check_height-title = Vérifiez votre taille
onboarding-automatic_proportions-check_height-description = Nous utilisons votre taille comme la base de nos mesures en utilisant la hauteur de votre casque comme approximation de votre taille réelle, mais il est préférable de vérifier si elles sont correctes vous-même !
# All the text is in bold!
onboarding-automatic_proportions-check_height-calculation_warning = Veuillez appuyer sur le bouton en vous <u>tenant debout</u> pour calculer votre taille. Vous avez un délais de 3 secondes après avoir appuyé sur le bouton !
onboarding-automatic_proportions-check_height-guardian_tip =
Si vous utilisez un casque VR sans-fil, assurez-vous d’avoir votre guardien/
limite activée pour que votre hauteur soit correcte !
onboarding-automatic_proportions-check_height-fetch_height = Je suis debout !
# Context is that the height is unknown
onboarding-automatic_proportions-check_height-unknown = Inconnu
# Shows an element below it
onboarding-automatic_proportions-check_height-hmd_height1 = La hauteur de votre casque est
# Shows an element below it
onboarding-automatic_proportions-check_height-height1 = donc votre taille est
onboarding-automatic_proportions-check_height-next_step = Ils sont bons
onboarding-automatic_proportions-start_recording-title = Préparez-vous à bouger
onboarding-automatic_proportions-start_recording-description = Nous allons maintenant enregistrer quelques positions et mouvements spécifiques. Ceux-ci seront inscris sur l’écran suivant. Soyez prêt à commencer dès que vous appuyez sur le bouton !
@@ -1111,12 +1070,6 @@ onboarding-automatic_proportions-error_modal-v2 =
Veuillez <docs>consulter la documentation</docs> ou rejoindre notre <discord>Discord</discord> pour obtenir de l’aide ^_^
onboarding-automatic_proportions-error_modal-confirm = Compris !
## Tracker scaled proportions setup
## Tracker scaled proportions reset
## Home
home-no_trackers = Aucun capteur détecté ou attribué
@@ -1141,50 +1094,6 @@ status_system-StatusSteamVRDisconnected =
status_system-StatusTrackerError = Le capteur { $trackerName } a une erreur.
status_system-StatusUnassignedHMD = Le casque VR devrait être attribué en tant que capteur de la tête.
## Firmware tool globals
firmware_tool-next_step = Prochaine étape
firmware_tool-previous_step = Étape précédente
firmware_tool-ok = Parfait
firmware_tool-retry = Réessayer
firmware_tool-loading = Chargement...
## Firmware tool Steps
firmware_tool = Outil de firmware DIY
firmware_tool-description = Vous permet de configurer et flasher vos capteurs DIY
firmware_tool-not_available = Oups, l'outil de firmware n'est pas disponible en ce moment. Revenez plus tard !
firmware_tool-not_compatible = L’outil de firmware n'est pas compatible avec cette version de serveur. Veuillez mettre à jour votre serveur !
firmware_tool-board_step = Sélectionnez votre carte
firmware_tool-board_step-description = Sélectionnez l'une des cartes répertoriées ci-dessous.
firmware_tool-board_pins_step = Vérifiez les broches
firmware_tool-board_pins_step-description =
Veuillez vérifier que les broches sélectionnées sont correctes.
Si vous avez suivi la documentation de SlimeVR, les valeurs par défaut devraient être correctes.
firmware_tool-board_pins_step-enable_led = Activer la LED
firmware_tool-board_pins_step-led_pin =
.label = Broche LED
.placeholder = Entrez l'adresse de la broche LED
firmware_tool-board_pins_step-battery_type = Sélectionnez le type de batterie
firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Batterie externe
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Batterie interne
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = MCP3021 interne
firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
## firmware tool build status
## Firmware update status
## Dedicated Firmware Update Page
firmware_update-changelog-title = Mise à jour vers { $version }
firmware_update-looking_for_devices = Recherche d'appareils à mettre à jour...
firmware_update-retry = Réessayer
firmware_update-update = Mettre à jour les capteurs sélectionnés
firmware_update-exit = Quitter
## Tray Menu
tray_menu-show = Afficher
+72 -407
View File
@@ -49,58 +49,6 @@ body_part-LEFT_HAND = Mano sinistra
body_part-LEFT_UPPER_LEG = Coscia sinistra
body_part-LEFT_LOWER_LEG = Caviglia sinistra
body_part-LEFT_FOOT = Piede sinistro
body_part-LEFT_THUMB_METACARPAL = Metacarpo del pollice sinistro
body_part-LEFT_THUMB_PROXIMAL = Falange prossimale del pollice sinistro
body_part-LEFT_THUMB_DISTAL = Falange distale del pollice sinistro
body_part-LEFT_INDEX_PROXIMAL = Falange prossimale dell'indice sinistro
body_part-LEFT_INDEX_INTERMEDIATE = Falange intermedia dell'indice sinistro
body_part-LEFT_INDEX_DISTAL = Falange distale dell'indice sinistro
body_part-LEFT_MIDDLE_PROXIMAL = Falange prossimale del medio sinistro
body_part-LEFT_MIDDLE_INTERMEDIATE = Falange intermedia del medio sinistro
body_part-LEFT_MIDDLE_DISTAL = Falange distale del medio sinistro
body_part-LEFT_RING_PROXIMAL = Falange prossimale dell'anulare sinistro
body_part-LEFT_RING_INTERMEDIATE = Falange intermedia dell'anulare sinistro
body_part-LEFT_RING_DISTAL = Falange distale dell'anulare sinistro
body_part-LEFT_LITTLE_PROXIMAL = Falange prossimale del mignolo sinistro
body_part-LEFT_LITTLE_INTERMEDIATE = Falange intermedia del mignolo sinistro
body_part-LEFT_LITTLE_DISTAL = Falange distale del mignolo sinistro
body_part-RIGHT_THUMB_METACARPAL = Metacarpo del pollice destro
body_part-RIGHT_THUMB_PROXIMAL = Falange prossimale del pollice destro
body_part-RIGHT_THUMB_DISTAL = Falange distale del pollice destro
body_part-RIGHT_INDEX_PROXIMAL = Falange prossimale dell'indice destro
body_part-RIGHT_INDEX_INTERMEDIATE = Falange intermedia dell'indice destro
body_part-RIGHT_INDEX_DISTAL = Falange distale dell'indice destro
body_part-RIGHT_MIDDLE_PROXIMAL = Falange prossimale del medio destro
body_part-RIGHT_MIDDLE_INTERMEDIATE = Falange intermedia del medio destro
body_part-RIGHT_MIDDLE_DISTAL = Falange distale del medio destro
body_part-RIGHT_RING_PROXIMAL = Falange prossimale dell'anulare destro
body_part-RIGHT_RING_INTERMEDIATE = Falange intermedia dell'anulare destro
body_part-RIGHT_RING_DISTAL = Falange distale dell'anulare destro
body_part-RIGHT_LITTLE_PROXIMAL = Falange prossimale del mignolo destro
body_part-RIGHT_LITTLE_INTERMEDIATE = Falange intermedia del mignolo destro
body_part-RIGHT_LITTLE_DISTAL = Falange distale del mignolo destro
## BoardType
board_type-UNKNOWN = Sconosciuto
board_type-NODEMCU = NodeMCU
board_type-CUSTOM = Scheda Personalizzata
board_type-WROOM32 = WROOM32
board_type-WEMOSD1MINI = Wemos D1 Mini
board_type-TTGO_TBASE = TTGO T-Base
board_type-ESP01 = ESP-01
board_type-SLIMEVR = SlimeVR
board_type-LOLIN_C3_MINI = Lolin C3 Mini
board_type-BEETLE32C3 = Beetle ESP32-C3
board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
board_type-OWOTRACK = owoTrack
board_type-WRANGLER = Wrangler Joycons
board_type-MOCOPI = Sony Mocopi
board_type-WEMOSWROOM02 = Wemos Wroom-02 D1 Mini
board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
board_type-HARITORA = Haritora
board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
board_type-GLOVE_IMU_SLIMEVR_DEV = Guanto SlimeVR Dev IMU
## Proportions
@@ -132,19 +80,10 @@ skeleton_bone-ELBOW_OFFSET = Correzione per il gomito
## Tracker reset buttons
reset-reset_all = Ripristina tutte le proporzioni
reset-reset_all_warning =
<b>Attenzione:</b> Questo ripristinerà le tue proporzioni in modo che siano basate solo sulla tua altezza.
Sei sicuro di volerlo fare?
reset-reset_all_warning-reset = Ripristino delle proporzioni
reset-reset_all_warning-cancel = Annulla
reset-reset_all_warning_default =
<b>Avvertimento:</b> Al momento non hai definito la tua altezza,
Di conseguenza le proporzioni saranno basate su un'altezza predefinita.
Sei sicuro di voler continuare?
reset-full = Ripristino completo
reset-mounting = Ripristino del posizionamento
reset-yaw = Ripristina dell'orientamento
reset-reset_all = Reset di tutte le proporzioni
reset-full = Reset completo
reset-mounting = Reset posizionamento
reset-yaw = Reset orientamento
## Serial detection stuff
@@ -187,7 +126,7 @@ widget-drift_compensation-clear = Rimuovi compensazione per il drift
## Widget: Clear Reset Mounting
widget-clear_mounting = Cancella tutti i ripristini del posizionamento
widget-clear_mounting = Ripristina impostazioni di reset posizionamento
## Widget: Developer settings
@@ -203,12 +142,9 @@ widget-developer_mode-more_info = Ulteriori informazioni
## Widget: IMU Visualizer
widget-imu_visualizer = Rotazione
widget-imu_visualizer-preview = Anteprima
widget-imu_visualizer-hide = Nascondi
widget-imu_visualizer-rotation_raw = Non processato
widget-imu_visualizer-rotation_preview = Anteprima
widget-imu_visualizer-acceleration = Accelerazione
widget-imu_visualizer-position = Posizione
widget-imu_visualizer-rotation_hide = Nascondi
## Widget: Skeleton Visualizer
@@ -249,7 +185,7 @@ tracker-rotation-back = Dietro
tracker-rotation-back_left = Posteriore sinistra
tracker-rotation-back_right = Posteriore destra
tracker-rotation-custom = Personalizzata
tracker-rotation-overriden = (sovrascritto dal ripristino del posizionamento)
tracker-rotation-overriden = (sovrascritto dal reset posizionamento)
## Tracker information
@@ -260,17 +196,9 @@ tracker-infos-url = URL del tracker
tracker-infos-version = Versione firmware
tracker-infos-hardware_rev = Versione hardware
tracker-infos-hardware_identifier = Hardware ID
tracker-infos-data_support = Supporto dati
tracker-infos-imu = Sensore IMU
tracker-infos-board_type = Scheda principale
tracker-infos-network_version = Versione del protocollo
tracker-infos-magnetometer = Magnetometro
tracker-infos-magnetometer-status-v1 =
{ $status ->
[DISABLED] Disattivato
[ENABLED] Attivato
*[NOT_SUPPORTED] Non supportato
}
## Tracker settings
@@ -285,27 +213,14 @@ tracker-settings-mounting_section-edit = Modifica posizionamento
tracker-settings-drift_compensation_section = Consenti compensazione per il drift
tracker-settings-drift_compensation_section-description = Questo tracker dovrebbe compensare per il drift quando la compensazione per il drift è abilitata?
tracker-settings-drift_compensation_section-edit = Consenti compensazione per il drift
tracker-settings-use_mag = Consenti il magnetometro su questo tracker
# Multiline!
tracker-settings-use_mag-description =
Vuoi consentire al tracker l'utilizzo del magnetometro per ridurre il drift quando l'uso del magnetometro è consentito? <b>Per favore non spegnere il tracker durante l'attivazione!</b>
È necessario prima consentire l'utilizzo del magnetometro, <magSetting>fare clic qui per accedere alle impostazioni</magSetting>.
tracker-settings-use_mag-label = Consenti magnetometro
# The .<name> means it's an attribute and it's related to the top key.
# In this case that is the settings for the assignment section.
tracker-settings-name_section = Nome del tracker
tracker-settings-name_section-description = Scegli un soprannome carino :)
tracker-settings-name_section-placeholder = Gamba destra di NightyQueer
tracker-settings-name_section-label = Nome del tracker
tracker-settings-forget = Dimentica il tracker
tracker-settings-forget-description = Rimuove il tracker dal SlimeVR server e impedisce che si riconnetta ad fino al riavvio del server. Le impostazioni del tracker non andranno perse.
tracker-settings-forget-label = Dimentica il tracker
tracker-settings-update-unavailable = Non può essere aggiornata (fai da te)
tracker-settings-update-up_to_date = Aggiornata
tracker-settings-update-available = { $versionName } è ora disponibile
tracker-settings-update = Aggiorna
tracker-settings-update-title = Versione firmware
## Tracker part card info
@@ -357,7 +272,7 @@ tracker_selection_menu-dont_assign = Non assegnare
# This line cares about multilines.
# <b>text</b> means that the text should be bold.
tracker_selection_menu-neck_warning =
<b>Attenzione:</b> Un tracker per il collo può essere mortale se indossato troppo stretto,
<b>Avvertimento:</b> Un tracker per il collo può essere mortale se indossato troppo stretto,
Il cinturino potrebbe bloccare la circolazione alla tua testa!
tracker_selection_menu-neck_warning-done = Comprendo i rischi
tracker_selection_menu-neck_warning-cancel = Annulla
@@ -381,8 +296,6 @@ settings-sidebar-utils = Strumenti
settings-sidebar-serial = Console seriale
settings-sidebar-appearance = Aspetto
settings-sidebar-notifications = Notifiche
settings-sidebar-firmware-tool = Strumento firmware fai-da-te
settings-sidebar-advanced = Avanzate
## SteamVR settings
@@ -430,37 +343,18 @@ settings-general-tracker_mechanics-filtering-type-smoothing-description = Attenu
settings-general-tracker_mechanics-filtering-type-prediction = Predizione
settings-general-tracker_mechanics-filtering-type-prediction-description = Riduce ritardo e rende movimenti più istantanei, ma può introdurre tremolio.
settings-general-tracker_mechanics-filtering-amount = Quantità
settings-general-tracker_mechanics-yaw-reset-smooth-time = Tempo di attenuazione del ripristino dell'orientamento (0 secondi disabilita l'attenuazione)
settings-general-tracker_mechanics-yaw-reset-smooth-time = Tempo di attenuazione del reset orientamento (0 secondi disabilita l'attenuazione)
settings-general-tracker_mechanics-drift_compensation = Compensazione per il drift
# This cares about multilines
settings-general-tracker_mechanics-drift_compensation-description = Compensa il drift di orientamento degli IMU applicando una rotazione inversa. Modifica la forza della compensazione e il massimo numero di ripristini che sono presi in considerazione.
settings-general-tracker_mechanics-drift_compensation-description = Compensa il drift degli IMU applicando una rotazione inversa. Modifica la forza della compensazione e il massimo numero di reset che sono presi in considerazione.
settings-general-tracker_mechanics-drift_compensation-enabled-label = Compensazione per il drift
settings-general-tracker_mechanics-drift_compensation-prediction = Compensazione del drift predittiva
# This cares about multilines
settings-general-tracker_mechanics-drift_compensation-prediction-description =
Predice la compensazione del drift oltre la quantità misurata in precedenza.
Abilita questa opzione se i tuoi tracker perdono continuano l'orientamento.
settings-general-tracker_mechanics-drift_compensation-prediction-label = Compensazione del drift predittiva
settings-general-tracker_mechanics-drift_compensation_warning =
<b>Attenzione:</b> Utilizzare la compensazione del drift solo se è necessario il ripristino
molto spesso (ogni ~5-10 minuti).
Alcune IMU che sono soggetti a frequenti ripristini includono:
Joy-Con, owoTrack e MPU (senza firmware recente).
settings-general-tracker_mechanics-drift_compensation_warning-cancel = Annulla
settings-general-tracker_mechanics-drift_compensation_warning-done = Capisco
settings-general-tracker_mechanics-drift_compensation-amount-label = Grado di compensazione
settings-general-tracker_mechanics-drift_compensation-max_resets-label = Utilizza fino a x ultimi ripristini
settings-general-tracker_mechanics-save_mounting_reset = Salva automaticamente la calibrazione del ripristino del posizionamento
settings-general-tracker_mechanics-drift_compensation-max_resets-label = Utilizza fino a x ultimi reset
settings-general-tracker_mechanics-save_mounting_reset = Salva automaticamente la calibrazione del posizionamento
settings-general-tracker_mechanics-save_mounting_reset-description =
Salva in automatico la calibrazione del ripristino del posizionamento per i tracker tra un riavvio e l'altro. Utile
Salva in automatico la calibrazione del posizionamento per i tracker tra un riavvio e l'altro. Utile
quando si indossa una tuta in cui la posizione e orientamento dei tracker non cambia tra una sessione e l'altra. <b>Non raccomandato per gli utenti standard!</b>
settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Salva il ripristino del posizionamento
settings-general-tracker_mechanics-use_mag_on_all_trackers = Utilizza il magnetometro su tutti i tracker IMU che lo supportano
settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
Utilizza il magnetometro su tutti i tracker che dispongono di un firmware compatibile, riducendo il drift in ambienti magnetici stabili.
Può essere disabilitato per ogni tracker nelle impostazioni del tracker. <b>Per favore non spegnere nessuno dei tracker durante l'attivazione!</b>
settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Usa il magnetometro sui tracker
settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Salva reset posizionamento
## FK/Tracking settings
@@ -477,31 +371,26 @@ settings-general-fk_settings-leg_tweak-skating_correction = Correzione slittamen
settings-general-fk_settings-leg_tweak-toe_snap = Dita dei piedi piantate
settings-general-fk_settings-leg_tweak-foot_plant = Piedi piantati
settings-general-fk_settings-leg_tweak-skating_correction-amount = Forza fattore di correzione slittamento
settings-general-fk_settings-leg_tweak-skating_correction-description = "Correzione slittamento" corregge l'effetto che fa sembrare che pattini sul ghiaccio, ma può peggiorare la precisione di certi movimenti. Quando abiliti questa funzione é necessario eseguire un ripristino completo e ri-calibrazione in gioco per il corretto funzionamento.
settings-general-fk_settings-leg_tweak-floor_clip-description = "Compenetrazione pavimento" può ridurre o anche eliminare completamente la compenetrazione con il pavimento. Quando abiliti questa funzione é necessario eseguire un ripristino completo e ri-calibrazione in gioco per il corretto funzionamento.
settings-general-fk_settings-leg_tweak-skating_correction-description = "Correzione slittamento" corregge l'effetto che fa sembrare che pattini sul ghiaccio, ma può peggiorare la precisione di certi movimenti. Quando abiliti questa funzione é necessario eseguire un reset completo e ri-calibrazione in gioco per il corretto funzionamento.
settings-general-fk_settings-leg_tweak-floor_clip-description = "Compenetrazione pavimento" può ridurre o anche eliminare completamente la compenetrazione con il pavimento. Quando abiliti questa funzione é necessario eseguire un reset completo e ri-calibrazione in gioco per il corretto funzionamento.
settings-general-fk_settings-leg_tweak-toe_snap-description = "Dita dei piedi piantate" prova ad indovinare la rotazione dei tuoi piedi quando non stai usando dei tracker per i piedi.
settings-general-fk_settings-leg_tweak-foot_plant-description = "Piedi piantati" ruota i piedi in modo tale che siano paralleli al terreno quando in contatto con esso.
settings-general-fk_settings-leg_fk = Tracking delle gambe
settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Abilita il ripristino di posizionamento dei piedi mettendosi in punta di piedi.
settings-general-fk_settings-leg_fk-reset_mounting_feet = Ripristino del posizionamento dei piedi
settings-general-fk_settings-enforce_joint_constraints = Limiti dello scheletro
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = Rispetta i vincoli
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = Impedisci ai legamenti di ruotare oltre il loro limite
settings-general-fk_settings-enforce_joint_constraints-correct_constraints = Correggi con i vincoli
settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = Correggi le rotazioni dei legamenti quando si spingono oltre il loro limite
settings-general-fk_settings-leg_fk-reset_mounting_feet-description = Abilita Reset posizionamento dei piedi mettendosi in punta di piedi.
settings-general-fk_settings-leg_fk-reset_mounting_feet = Reset posizionamento dei piedi
settings-general-fk_settings-arm_fk = Tracking delle braccia
settings-general-fk_settings-arm_fk-description = Forza il calcolo della posizione delle braccia a utilizzare il visore anche se la posizione delle mani é disponibile.
settings-general-fk_settings-arm_fk-force_arms = Forza il calcolo delle braccia dal visore
settings-general-fk_settings-reset_settings = Ripristino delle impostazioni
settings-general-fk_settings-reset_settings = Ripristina impostazioni
settings-general-fk_settings-reset_settings-reset_hmd_pitch-description = Ripristina l'inclinazione dell'HMD (rotazione verticale) dopo un reset completo. Utile se si indossa un HMD sulla fronte per VTubing o mocap. Non abilitare per VR.
settings-general-fk_settings-reset_settings-reset_hmd_pitch = Ripristina l'inclinazione dell'HMD
settings-general-fk_settings-arm_fk-reset_mode-description = Cambia la posa delle braccia usata per il ripristino del posizionamento.
settings-general-fk_settings-arm_fk-reset_mode-description = Cambia la posa delle braccia usata per il reset posizionamento.
settings-general-fk_settings-arm_fk-back = Indietro
settings-general-fk_settings-arm_fk-back-description = La modalità predefinita, con la parte superiori delle braccia che vanno indietro e le parte inferiori delle braccia che vanno avanti.
settings-general-fk_settings-arm_fk-tpose_up = Posa a T (in alto)
settings-general-fk_settings-arm_fk-tpose_up-description = Si aspetta che le braccia siano abbassate sui lati durante il Ripristino Completo e a 90 gradi con il busto ai lati per il Ripristino Posizionamento.
settings-general-fk_settings-arm_fk-tpose_up-description = Si aspetta che le braccia siano abbassate sui lati durante il Reset Completo e a 90 gradi con il busto ai lati per il Reset Posizionamento.
settings-general-fk_settings-arm_fk-tpose_down = Posa a T (in basso)
settings-general-fk_settings-arm_fk-tpose_down-description = Si aspetta che le braccia siano a 90 gradi con il busto ai lati durante il Ripristino Completo e abbassate sui lati per il Ripristino Posizionamento.
settings-general-fk_settings-arm_fk-tpose_down-description = Si aspetta che le braccia siano a 90 gradi con il busto ai lati durante il Reset Completo e abbassate sui lati per il Reset Posizionamento.
settings-general-fk_settings-arm_fk-forward = Avanti
settings-general-fk_settings-arm_fk-forward-description = Si aspetta che le tue braccia siano alzate di 90 gradi in avanti. Utile per VTubing.
settings-general-fk_settings-skeleton_settings-toggles = Interruttori per lo scheletro
@@ -520,12 +409,15 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = Media
settings-general-fk_settings-skeleton_settings-interp_knee_ankle = Media dell'orientamento delle ginocchia e la rotazione delle caviglie
settings-general-fk_settings-self_localization-title = Modalità Mocap
settings-general-fk_settings-self_localization-description = La modalità Mocap consente allo scheletro di tracciare approssimativamente la propria posizione senza visore o altri tracker. Si noti che questo richiede trakers per piedi e la testa per funzionare ed è ancora in fase sperimentale.
settings-general-fk_settings-vive_emulation-title = Imitazione Vive
settings-general-fk_settings-vive_emulation-description = Imita i problemi che hanno i Vive tracker utilizzati sul girovita. Questo è uno scherzo e peggiora il tracciamento.
settings-general-fk_settings-vive_emulation-label = Abilita l'imitazione Vive
## Gesture control settings (tracker tapping)
settings-general-gesture_control = Controllo con gesti
settings-general-gesture_control-subtitle = Ripristino toccando un tracker
settings-general-gesture_control-description = Abilita o disabilita il ripristino toccando un tracker. Il tracker più in alto sul torso viene utilizzato per il ripristino dell'orientamento, il tracker più in alto sulla gamba sinistra viene utilizzato per il ripristino completo e il tracker più in alto sulla gamba destra viene utilizzato per il ripristino del posizionamento. Si deve tener presente che i tocchi devono avvenire entro 0,6 secondi per essere registrati.
settings-general-gesture_control-subtitle = Reset toccando un tracker
settings-general-gesture_control-description = Abilita o disabilita il reset toccando un tracker. Il tracker più in alto sul torso viene utilizzato per il reset orientamento, il tracker più in alto sulla gamba sinistra viene utilizzato per il reset completo e il tracker più in alto sulla gamba destra viene utilizzato per il reset posizionamento. Si deve tener presente che i tocchi devono avvenire entro 0,6 secondi per essere registrati.
# This is a unit: 3 taps, 2 taps, 1 tap
# $amount (Number) - Amount of taps (touches to the tracker's case)
settings-general-gesture_control-taps =
@@ -541,15 +433,15 @@ settings-general-gesture_control-trackers =
[many] { $amount } tracker
*[other] { $amount } tracker
}
settings-general-gesture_control-yawResetEnabled = Abilita tocco per il ripristino dell'orientamento
settings-general-gesture_control-yawResetDelay = Ritardo per il ripristino dell'orientamento
settings-general-gesture_control-yawResetTaps = Numero di tocchi per il ripristino dell'orientamento
settings-general-gesture_control-fullResetEnabled = Abilita tocco per il ripristino completo
settings-general-gesture_control-fullResetDelay = Ritardo per il ripristino completo
settings-general-gesture_control-fullResetTaps = Numero di tocchi per il ripristino completo
settings-general-gesture_control-mountingResetEnabled = Abilita tocco per ripristino del posizionamento
settings-general-gesture_control-mountingResetDelay = Ritardo per il ripristino del posizionamento
settings-general-gesture_control-mountingResetTaps = Numero di tocchi per il ripristino del posizionamento
settings-general-gesture_control-yawResetEnabled = Abilita tocco per il reset orientamento
settings-general-gesture_control-yawResetDelay = Ritardo per il reset orientamento
settings-general-gesture_control-yawResetTaps = Numero di tocchi per il reset orientamento
settings-general-gesture_control-fullResetEnabled = Abilita tocco per il reset completo
settings-general-gesture_control-fullResetDelay = Ritardo per il reset completo
settings-general-gesture_control-fullResetTaps = Numero di tocchi per il reset completo
settings-general-gesture_control-mountingResetEnabled = Abilita tocco per reset posizionamento
settings-general-gesture_control-mountingResetDelay = Ritardo per il reset posizionamento
settings-general-gesture_control-mountingResetTaps = Numero di tocchi per il reset posizionamento
# The number of trackers that can have higher acceleration before a tap is rejected
settings-general-gesture_control-numberTrackersOverThreshold = Tracker sopra il limite
settings-general-gesture_control-numberTrackersOverThreshold-description = Aumenta questo valore se il rilevamento del tocco non funziona. Non aumentarlo al di sopra di quanto necessario per far funzionare il rilevamento del tocco in quanto causerebbe più falsi positivi.
@@ -561,9 +453,6 @@ settings-general-interface-dev_mode = Modalità sviluppatore
settings-general-interface-dev_mode-description = Questa modalità è utile se hai bisogno di dati approfonditi o devi interagire in maniera più avanzata con i tracker connessi.
settings-general-interface-dev_mode-label = Modalità sviluppatore
settings-general-interface-theme = Colore di tema
settings-general-interface-show-navbar-onboarding = Mostra "{ navbar-onboarding }" sulla barra di navigazione
settings-general-interface-show-navbar-onboarding-description = Cambia se il pulsante "{ navbar-onboarding }" viene visualizzato nella barra di navigazione.
settings-general-interface-show-navbar-onboarding-label = Mostra "{ navbar-onboarding }"
settings-general-interface-lang = Seleziona la lingua
settings-general-interface-lang-description = Seleziona la lingua che vuoi utilizzare
settings-general-interface-lang-placeholder = Seleziona la lingua da utilizzare
@@ -575,9 +464,6 @@ settings-interface-appearance-font-os_font = Font di sistema
settings-interface-appearance-font-slime_font = Font predefinito
settings-interface-appearance-font_size = Ridimensionamento del font di base
settings-interface-appearance-font_size-description = Questo influisce sulla dimensione del font dell'intera interfaccia ad eccezione di questo pannello delle impostazioni.
settings-interface-appearance-decorations = Usa le decorazioni native del sistema
settings-interface-appearance-decorations-description = L'applicazione non eseguirà il rendering della barra superiore dell'interfaccia e utilizzerà invece quella del sistema operativo.
settings-interface-appearance-decorations-label = Usa decorazioni native
## Notification settings
@@ -586,7 +472,7 @@ settings-general-interface-serial_detection = Rilevazione nuovi dispositivi seri
settings-general-interface-serial_detection-description = Questa opzione mostrerà un pop-up ogni volta che colleghi un nuovo dispositivo seriale che potrebbe essere un tracker. Aiuta a facilitare la configurazione iniziale di un tracker
settings-general-interface-serial_detection-label = Rilevazione nuovi dispositivi seriali
settings-general-interface-feedback_sound = Suono di feedback
settings-general-interface-feedback_sound-description = Questa opzione riprodurrà un suono quando viene effettuato un ripristino
settings-general-interface-feedback_sound-description = Questa opzione riprodurrà un suono quando viene effettuato un reset
settings-general-interface-feedback_sound-label = Suono di feedback
settings-general-interface-feedback_sound-volume = Volume del suono di feedback
settings-general-interface-connected_trackers_warning = Avviso di tracker connessi
@@ -618,7 +504,7 @@ settings-serial-factory_reset = Ripristino delle impostazioni di fabbrica
# This cares about multilines
# <b>text</b> means that the text should be bold
settings-serial-factory_reset-warning =
<b>Attenzione:</b> Questa azione ripristinerà il tracker alle impostazioni di fabbrica.
<b>Avvertimento:</b> Questa azione ripristinerà il tracker alle impostazioni di fabbrica.
Ciò significa che le impostazioni Wi-Fi e di calibrazione <b>andranno tutte perse!</b>
settings-serial-factory_reset-warning-ok = Capisco cosa sto facendo
settings-serial-factory_reset-warning-cancel = Annulla
@@ -667,13 +553,6 @@ settings-osc-vrchat-description-v1 =
settings-osc-vrchat-enable = Attiva
settings-osc-vrchat-enable-description = Attiva o disattiva l'invio e la ricezione dei dati
settings-osc-vrchat-enable-label = Attiva
settings-osc-vrchat-oscqueryEnabled = Abilita OSCQuery
settings-osc-vrchat-oscqueryEnabled-description =
OSCQuery rileva automaticamente le istanze in esecuzione di VRChat e invia loro dati.
Può anche rendersi visibile ad essi per ricevere i dati del HMD e dei controller.
Per consentire la ricezione dei dati del HMD e controller da VRChat, vai nelle impostazioni dal menu principale
in "Tracking e IK" e abilita "Consenti l'Invio di Dati di Tracciamento OSC di Testa e Polso".
settings-osc-vrchat-oscqueryEnabled-label = Abilita OSCQuery
settings-osc-vrchat-network = Porte di rete
settings-osc-vrchat-network-description-v1 = Imposta le porte per l'ascolto e l'invio dei dati. Può essere lasciato come predefinito per utilizzo con VRChat.
settings-osc-vrchat-network-port_in =
@@ -716,7 +595,12 @@ settings-osc-vmc-network-address-description = Scegli l'indirizzo di rete a cui
settings-osc-vmc-network-address-placeholder = Indirizzo IPV4
settings-osc-vmc-vrm = Modello VRM
settings-osc-vmc-vrm-description = Carica un modello VRM per consentite l'ancoraggio della testa e migliorare la compatibilitá con altre applicazioni
settings-osc-vmc-vrm-untitled_model = Modello senza titolo
settings-osc-vmc-vrm-model_unloaded = Nessun modello caricato
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] Modello caricato: { $name }
*[other] Modello senza titolo caricato
}
settings-osc-vmc-vrm-file_select = Trascina qui un modello da usare, o <u>sfoglia</u>
settings-osc-vmc-anchor_hip = Ancoraggio sul bacino
settings-osc-vmc-anchor_hip-description = Ancora la posizione del tracciamento del bacino; utile per VTubing da seduti. Se disabilitato, carica un modello VRM.
@@ -725,36 +609,6 @@ settings-osc-vmc-mirror_tracking = Tracciamento speculare
settings-osc-vmc-mirror_tracking-description = Specchia il tracciamento orizzontalmente.
settings-osc-vmc-mirror_tracking-label = Tracciamento speculare
## Advanced settings
settings-utils-advanced = Avanzato
settings-utils-advanced-reset-gui = Ripristina impostazioni della GUI
settings-utils-advanced-reset-gui-description = Ripristina le impostazioni predefinite per l'interfaccia.
settings-utils-advanced-reset-gui-label = Ripristina GUI
settings-utils-advanced-reset-server = Reimpostare le impostazioni di tracciamento
settings-utils-advanced-reset-server-description = Ripristina le impostazioni predefinite per il tracciamento.
settings-utils-advanced-reset-server-label = Ripristina il tracciamento
settings-utils-advanced-reset-all = Ripristina tutte le impostazioni
settings-utils-advanced-reset-all-description = Ripristina le impostazioni predefinite sia per l'interfaccia che per il tracciamento.
settings-utils-advanced-reset-all-label = Ripristina tutto
settings-utils-advanced-reset_warning =
{ $type ->
[gui]
<b>Attenzione:</b> Tutte le impostazioni della GUI verranno ripristinate ai valori predefiniti.
Sei sicuro di volerlo fare?
[server]
<b>Attenzione:</b> Tutte le impostazioni di tracciento verranno ripristinate ai valori predefiniti.
Sei sicuro di volerlo fare?
*[all]
<b>Attenzione:</b> Tutte le impostazioni verranno ripristinate ai valori predefiniti.
Sei sicuro di volerlo fare?
}
settings-utils-advanced-reset_warning-reset = Ripristina impostazioni
settings-utils-advanced-reset_warning-cancel = Annulla
settings-utils-advanced-open_data = Cartella dei dati
settings-utils-advanced-open_data-description = Aprire la cartella dati di SlimeVR in Esplora Risorse, contenente i file di configurazione e di registro.
settings-utils-advanced-open_data-label = Apri cartella
## Setup/onboarding menu
onboarding-skip = Salta la configurazione
@@ -780,7 +634,6 @@ onboarding-wifi_creds-submit = Conferma!
onboarding-wifi_creds-ssid =
.label = SSID
.placeholder = Enter SSID
onboarding-wifi_creds-ssid-required = È richiesto il nome Wi-Fi
onboarding-wifi_creds-password =
.label = Password
.placeholder = Inserisci password
@@ -788,25 +641,25 @@ onboarding-wifi_creds-password =
## Mounting setup
onboarding-reset_tutorial-back = Torna alla calibrazione posizionamento
onboarding-reset_tutorial = Tutorial di ripristino
onboarding-reset_tutorial = Tutorial di reset
onboarding-reset_tutorial-explanation = Mentre usi i tuoi tracker, potrebbero perdere l'allineamento a causa del drift dell'orientamento dell'IMU, o perché potresti averli spostati fisicamente. Hai diversi modi per risolvere questo problema.
onboarding-reset_tutorial-skip = Salta passaggio
# Cares about multiline
onboarding-reset_tutorial-0 =
Tocca { $taps } volte il tracker evidenziato per eseguire il ripristino dell'orientamento.
Tocca { $taps } volte il tracker evidenziato per eseguire il reset orientamento
Ciò farà sì che i tracker siano rivolti nella stessa direzione del tuo HMD.
# Cares about multiline
onboarding-reset_tutorial-1 =
Tocca { $taps } volte il tracker evidenziato per eseguire il ripristino completo.
Tocca { $taps } volte il tracker evidenziato per eseguire il reset completo.
Devi stare in piedi drittə per questo (I-pose). C'è un ritardo di 3 secondi (configurabile) prima che accada effettivamente.
Questo ripristinerà completamente la posizione e la rotazione di tutti i tuoi tracker. Dovrebbe risolvere la maggior parte dei problemi.
# Cares about multiline
onboarding-reset_tutorial-2 =
Tocca { $taps } volte il tracker evidenziato per eseguire il ripristino del posizionamento.
Tocca { $taps } volte il tracker evidenziato per eseguire il reset posizionamento.
Il ripristino del posizionamento aiuta a determinare come i tracker vengono effettivamente posizionati su di te, quindi se li hai spostati accidentalmente e hai cambiato il modo in cui sono orientati di una grande quantità, questo aiuterà.
Il reset posizionamento aiuta su come i tracker vengono effettivamente posizionati su di te, quindi se li hai spostati accidentalmente e hai cambiato il modo in cui sono orientati di una grande quantità, questo aiuterà.
Devi essere in posa come se stessi sciando come mostrato nella procedura guidata di posizionamento automatico e ha un ritardo di 3 secondi (configurabile) prima che venga attivato.
@@ -838,7 +691,6 @@ onboarding-connect_tracker-issue-serial = Sto avendo problemi nel connettermi!
onboarding-connect_tracker-usb = Tracker USB
onboarding-connect_tracker-connection_status-none = Ricerca dei tracker in corso
onboarding-connect_tracker-connection_status-serial_init = Connessione al dispositivo seriale in corso
onboarding-connect_tracker-connection_status-obtaining_mac_address = Aquisizione in corso dell'indirizzo MAC del tracker
onboarding-connect_tracker-connection_status-provisioning = Invio credenziali Wi-Fi in corso
onboarding-connect_tracker-connection_status-connecting = Tentativo di connessione al Wi-Fi in corso
onboarding-connect_tracker-connection_status-looking_for_server = Ricerca del server in corso
@@ -868,7 +720,6 @@ onboarding-calibration_tutorial-status-waiting = Ti aspettiamo
onboarding-calibration_tutorial-status-calibrating = Calibrazione in corso
onboarding-calibration_tutorial-status-success = Bene!
onboarding-calibration_tutorial-status-error = Il tracker è stato mosso
onboarding-calibration_tutorial-skip = Salta il tutorial
## Tracker assignment tutorial
@@ -992,11 +843,11 @@ onboarding-choose_mounting = Quale metodo di calibrazione del posizionamento vuo
# Multiline text
onboarding-choose_mounting-description = L'orientamento di posizionamento corregge la posizione dei tracker sul corpo.
onboarding-choose_mounting-auto_mounting = Posizionamento automatico
# Italicized text
# Italized text
onboarding-choose_mounting-auto_mounting-label-v2 = Raccomandato
onboarding-choose_mounting-auto_mounting-description = Questo processo identificherá automaticamente le direzioni per la posizione di montaggio di tutti i traker facendo 2 pose
onboarding-choose_mounting-manual_mounting = Posizionamento manuale
# Italicized text
# Italized text
onboarding-choose_mounting-manual_mounting-label-v2 = Potrebbe non essere abbastanza preciso
onboarding-choose_mounting-manual_mounting-description = Questo processo ti lascerá scegliere manualmente le direzioni per la posizione di montaggio di tutti i tracker
# Multiline text
@@ -1013,7 +864,7 @@ onboarding-manual_mounting-back = Torna indietro per entrare in VR
onboarding-manual_mounting = Posizionamento manuale
onboarding-manual_mounting-description = Fare clic su ogni tracker e selezionare in che direzione sono montati
onboarding-manual_mounting-auto_mounting = Posizionamento automatico
onboarding-manual_mounting-next = Passaggio successivo
onboarding-manual_mounting-next = Passo successivo
## Tracker automatic mounting setup
@@ -1021,17 +872,17 @@ onboarding-automatic_mounting-back = Torna indietro per entrare in VR
onboarding-automatic_mounting-title = Calibrazione posizionamento
onboarding-automatic_mounting-description = Affinché i tracker di SlimeVR funzionino, dobbiamo configurare una rotazione di posizione di montaggio ai tuoi tracker per allinearli con la posizione di montaggio del tuo tracker fisico.
onboarding-automatic_mounting-manual_mounting = Posizionamento manuale
onboarding-automatic_mounting-next = Passaggio successivo
onboarding-automatic_mounting-next = Passo successivo
onboarding-automatic_mounting-prev_step = Passaggio precedente
onboarding-automatic_mounting-done-title = Rotazione delle posizioni di montaggio calibrate.
onboarding-automatic_mounting-done-description = La calibrazione della posizione é completa!
onboarding-automatic_mounting-done-restart = Torna all'inizio
onboarding-automatic_mounting-mounting_reset-title = Ripristino del posizionamento
onboarding-automatic_mounting-mounting_reset-title = Reset posizionamento
onboarding-automatic_mounting-mounting_reset-step-0 = 1. Piegati come per sciare: con le gambe leggermente piegate e unite, la parte superiore del corpo inclinata in avanti e le braccia piegate.
onboarding-automatic_mounting-mounting_reset-step-1 = 2. Premere il pulsante "Ripristino del posizionamento" e attendere 3 secondi prima che le rotazioni delle posizioni di montaggio dei tracker vengano ripristinate.
onboarding-automatic_mounting-mounting_reset-step-1 = 2. Premere il pulsante "Reset posizionamento" e attendere 3 secondi prima che le rotazioni delle posizioni di montaggio dei tracker vengano ripristinate.
onboarding-automatic_mounting-preparation-title = Preparazione
onboarding-automatic_mounting-preparation-step-0 = 1. Stai in piedi drittə con le braccia lungo i fianchi.
onboarding-automatic_mounting-preparation-step-1 = 2. Premi il pulsante "Ripristino completo" e attendi 3 secondi prima che i tracker vengano ripristinati.
onboarding-automatic_mounting-preparation-step-1 = 2. Premi il pulsante "Reset completo" e attendi 3 secondi prima che i tracker vengano ripristinati.
onboarding-automatic_mounting-put_trackers_on-title = Indossa i tuoi tracker
onboarding-automatic_mounting-put_trackers_on-description = Per calibrare le rotazioni delle posizioni di montaggio useremo i tracker che hai appena assegnato. Indossa tutti i tuoi tracker, puoi vedere quali sono quali nella figura a destra.
onboarding-automatic_mounting-put_trackers_on-next = Sto indossando tutti i miei tracker
@@ -1045,25 +896,16 @@ onboarding-choose_proportions-description-v1 =
Quando le proporzioni del tuo corpo non corrispondono a quelle salvate, la precisione di tracciamento sarà peggiore e noterai cose come slittamento o come la posizione del tuo corpo che no corrisponde con quella del tuo avatar.
<b>Devi misurare il tuo corpo solo una volta!</b> A meno che non siano sbagliate o il tuo corpo non sia cambiato, non è necessario rifarlo.
onboarding-choose_proportions-auto_proportions = Proporzioni automatiche
# Italicized text
# Italized text
onboarding-choose_proportions-auto_proportions-subtitle = Raccomandato
onboarding-choose_proportions-auto_proportions-descriptionv3 =
Questo indovinerà le tue proporzioni registrando un campione dei tuoi movimenti e passandolo attraverso un algoritmo.
<b>Ciò richiede che il tuo visore (HMD) sia collegato a SlimeVR e indossato correttaments sulla tua testa</b>
onboarding-choose_proportions-manual_proportions = Proporzioni manuali
# Italicized text
# Italized text
onboarding-choose_proportions-manual_proportions-subtitle = Per piccole modifiche
onboarding-choose_proportions-manual_proportions-description = Questo processo ti permetterà di regolare manualmente le proporzioni del corpo modificandole direttamente.
onboarding-choose_proportions-scaled_proportions = Proporzioni in scala
# Italized text
onboarding-choose_proportions-scaled_proportions-subtitle = Consigliato per i nuovi utenti
# Multiline string
onboarding-choose_proportions-scaled_proportions-description =
Questo scalerà le proporzioni di un corpo umano medio in base alla tua altezza, questo aiuterà con la configurazione di base del tracciamento del corpo.
<b>È necessario che il visore (HMD) sia collegato a SlimeVR e indossato sulla testa!</b>
onboarding-choose_proportions-scaled_proportions-button = Proporzioni in scala
onboarding-choose_proportions-export = Esporta le proporzioni del corpo
onboarding-choose_proportions-import = Importa le proporzioni del corpo
onboarding-choose_proportions-import-success = Importate con successo
@@ -1072,7 +914,7 @@ onboarding-choose_proportions-file_type = File delle proporzioni del corpo
## Tracker manual proportions setup
onboarding-manual_proportions-back = Torna al tutorial di ripristino
onboarding-manual_proportions-back = Torna al tutorial di reset
onboarding-manual_proportions-title = Impostazione manuale delle proporzioni del corpo
onboarding-manual_proportions-precision = Regolazione di precisione
onboarding-manual_proportions-auto = Calibrazione automatica
@@ -1080,7 +922,7 @@ onboarding-manual_proportions-ratio = Regolazione tramite gruppi di rapporti
## Tracker automatic proportions setup
onboarding-automatic_proportions-back = Torna al tutorial di ripristino
onboarding-automatic_proportions-back = Torna al tutorial di reset
onboarding-automatic_proportions-title = Misura il tuo corpo
onboarding-automatic_proportions-description = Affinché i tracker di SlimeVR funzionino dobbiamo conoscere la lunghezza dei tuoi arti. Questa breve calibrazione le misurerà per te.
onboarding-automatic_proportions-manual = Proporzioni manuali
@@ -1096,35 +938,23 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
I tuoi tracker e il visore sono connessi al server di SlimeVR e stanno funzionando correttamente (e.g. non si bloccano, disconnettono, etc.)
Il tuo visore sta riportando dati di posizione al server di SlimeVR (ciò significa generalmente avere SteamVR in esecuzione e connesso a SlimeVR usando il driver di SlimeVR per SteamVR).
Il tuo visore sta riportando dati di posizione al server di SlimeVR (ciò significa generalmente avere SteamVR in esecuzione e connesso a SlimeVR usando il driver di SlimeVR per SteamVR).
Il tuo tracciamento funziona e rappresenta accuratamente i tuoi movimenti (e.g. hai eseguito un ripristino completo e i traker si muovono nella giusta direzione quando calci, ti pieghi, ti siedi, ecc.).
Il tuo tracciamento funziona e rappresenta accuratamente i tuoi movimenti (e.g. hai eseguito un reset completo e i traker si muovono nella giusta direzione quando calci, ti pieghi, ti siedi, ecc.).
onboarding-automatic_proportions-requirements-next = Ho letto i requisiti.
onboarding-automatic_proportions-check_height-title-v3 = Misura l'altezza del visore
onboarding-automatic_proportions-check_height-description-v2 = L'altezza del visore (HMD) dovrebbe essere leggermente inferiore all'altezza completa, poiché il visore misura l'altezza degli occhi. Questa misurazione verrà utilizzata come base per le proporzioni del tuo corpo.
onboarding-automatic_proportions-check_height-title = Controlla la tua altezza
onboarding-automatic_proportions-check_height-description = Usiamo la tua altezza come base delle nostre misurazioni utilizzando l'altezza dell'HMD come approssimazione della tua altezza effettiva, ma è meglio controllare se il valore è giusto!
# All the text is in bold!
onboarding-automatic_proportions-check_height-calculation_warning-v3 = Inizia a misurare stando in piedi <u>dritti</u> per misurare la tua altezza. Fai attenzione a non alzare le mani più in alto del visore, poiché potrebbero influire sulla misurazione!
onboarding-automatic_proportions-check_height-calculation_warning = Si prega di premere il pulsante stando in piedi <u>in posizione eretta</u> per calcolare l'altezza. Hai 3 secondi dopo aver premuto il pulsante!
onboarding-automatic_proportions-check_height-guardian_tip =
Se stai utilizzando un visore VR standalone, assicurati di avere il tuo guardiano/
limiti attivato in modo che la tua altezza sia corretta!
onboarding-automatic_proportions-check_height-fetch_height = Sono in piedi!
# Context is that the height is unknown
onboarding-automatic_proportions-check_height-unknown = Sconosciuto
# Shows an element below it
onboarding-automatic_proportions-check_height-hmd_height2 = L'altezza del visore è:
onboarding-automatic_proportions-check_height-measure-start = Inizia la misurazione
onboarding-automatic_proportions-check_height-measure-stop = Interrompi la misurazione
onboarding-automatic_proportions-check_height-measure-reset = Riprova la misurazione
onboarding-automatic_proportions-check_height-next_step = Sono corretti
onboarding-automatic_proportions-check_floor_height-title = Misura l'altezza del pavimento (opzionale)
onboarding-automatic_proportions-check_floor_height-description = In alcuni casi, l'altezza del pavimento potrebbe non essere impostata correttamente dal visore, causando la misurazione dell'altezza del visore a risultare superiore a quella che dovrebbe essere. Puoi misurare l'"altezza" del pavimento per correggere l'altezza del visore.
# All the text is in bold!
onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = Inizia a misurare e posiziona un controller contro il pavimento per misurarne l'altezza. Se sei sicurə che l'altezza del pavimento sia corretta, puoi saltare questo passaggio.
onboarding-automatic_proportions-check_height-hmd_height1 = L'altezza del tuo HMD è
# Shows an element below it
onboarding-automatic_proportions-check_floor_height-floor_height = L'altezza del pavimento è:
onboarding-automatic_proportions-check_floor_height-full_height = La tua altezza totale stimata è:
onboarding-automatic_proportions-check_floor_height-measure-start = Inizia la misurazione
onboarding-automatic_proportions-check_floor_height-measure-stop = Interrompi la misurazione
onboarding-automatic_proportions-check_floor_height-measure-reset = Riprova la misurazione
onboarding-automatic_proportions-check_floor_height-skip_step = Salta il passaggio e salva
onboarding-automatic_proportions-check_floor_height-next_step = Usa l'altezza del pavimento e salva
onboarding-automatic_proportions-check_height-height1 = quindi la tua altezza effettiva è
onboarding-automatic_proportions-check_height-next_step = Sono corretti
onboarding-automatic_proportions-start_recording-title = Preparati a muoverti
onboarding-automatic_proportions-start_recording-description = Ora registreremo alcune pose e movimenti specifici. Questi verranno descritte nelle schermate successive. Preparati a iniziare quando premi il pulsante!
onboarding-automatic_proportions-start_recording-next = Inizia registrazione
@@ -1154,32 +984,10 @@ onboarding-automatic_proportions-verify_results-redo = Rifai registrazione
onboarding-automatic_proportions-verify_results-confirm = Sono corretti
onboarding-automatic_proportions-done-title = Corpo misurato e salvato.
onboarding-automatic_proportions-done-description = La calibrazione delle proporzioni del tuo corpo è completa!
onboarding-automatic_proportions-error_modal-v2 =
<b>Attenzione:</b> C'è stato un errore durante la stima delle proporzioni!
Si tratta probabilmente di un problema di calibrazione del montaggio. Assicurati che il tracciamento funzioni correttamente prima di riprovare.
Controlla <docs>i documenti</docs> o entra nel nostro server <discord>Discord</discord> per assistenza ^_^
onboarding-automatic_proportions-error_modal =
<b>Avvertimento:</b> È stato riscontrato un errore durante la stima delle proporzioni!
Per piacere, <docs>controlla la documentazione</docs> o unisciti al nostro <discord>Discord</discord> per ricevere aiuto ^_^
onboarding-automatic_proportions-error_modal-confirm = Ho capito!
onboarding-automatic_proportions-smol_warning =
L'altezza configurata di { $height } è inferiore all'altezza minima accettata di { $minHeight }.
<b>Si prega di ripetere le misurazioni e assicurarsi che siano corrette.</b>
onboarding-automatic_proportions-smol_warning-cancel = Indietro
## Tracker scaled proportions setup
onboarding-scaled_proportions-title = Proporzioni in scala
onboarding-scaled_proportions-description = Affinché i tracker di SlimeVR funzionino, dobbiamo conoscere la lunghezza dei tuoi arti. Questo utilizzerà delle proporzioni nella media e la scalerà in base alla tua altezza.
onboarding-scaled_proportions-manual_height-title = Configura la tua altezza
onboarding-scaled_proportions-manual_height-description = L'altezza del visore (HMD) dovrebbe essere leggermente inferiore all'altezza completa, poiché il visore misura l'altezza degli occhi. Questa altezza verrà utilizzata come base per le proporzioni del tuo corpo.
onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR non è attualmente connesso a SlimeVR, quindi le misurazioni non possono essere basate sul visore. <b>Procedi a tua discrezione o controlla la documentazione!</b>
onboarding-scaled_proportions-manual_height-height = L'altezza del visore è
onboarding-scaled_proportions-manual_height-next_step = Continua e salva
## Tracker scaled proportions reset
onboarding-scaled_proportions-reset_proportion-title = Ripristina le proporzioni del corpo
onboarding-scaled_proportions-reset_proportion-description = Per impostare le proporzioni del tuo corpo in base alla tua altezza, ora devi ripristinare tutte le tue proporzioni. In questo modo verranno cancellate tutte le proporzioni configurate e verrà fornita una configurazione di base.
onboarding-scaled_proportions-done-title = Proporzioni del corpo configurate
onboarding-scaled_proportions-done-description = Le proporzioni del tuo corpo dovrebbero ora essere configurate in base alla tua altezza.
## Home
@@ -1196,7 +1004,7 @@ trackers_still_on-modal-cancel = Attendi un momento...
## Status system
status_system-StatusTrackerReset = É consigliato eseguire un ripristino completo poiché uno o più tracker non sono regolati.
status_system-StatusTrackerReset = É consigliato eseguire un reset completo poiché uno o più tracker non sono regolati.
status_system-StatusSteamVRDisconnected =
{ $type ->
[steamvr_feeder] Attualmente non è connesso a SlimeVR Feeder App.
@@ -1205,149 +1013,6 @@ status_system-StatusSteamVRDisconnected =
status_system-StatusTrackerError = Il tracker { $trackerName } ha un errore.
status_system-StatusUnassignedHMD = Il visore deve essere assegnato come tracker della testa.
## Firmware tool globals
firmware_tool-next_step = Passaggio successivo
firmware_tool-previous_step = Passaggio precedente
firmware_tool-ok = Tutto apposto
firmware_tool-retry = Riprova
firmware_tool-loading = Caricamento...
## Firmware tool Steps
firmware_tool = Strumento firmware fai-da-te
firmware_tool-description = Ti consente di configurare e flashare i tuoi tracker fai-da-te
firmware_tool-not_available = Oops, lo strumento firmware non è disponibile al momento. Torna più tardi!
firmware_tool-not_compatible = Lo strumento firmware non è compatibile con questa versione del server. Aggiorna il tuo server!
firmware_tool-board_step = Seleziona la tua scheda
firmware_tool-board_step-description = Seleziona una delle schede elencate di seguito.
firmware_tool-board_pins_step = Controlla i pin
firmware_tool-board_pins_step-description =
Per piacer verifica che i pin selezionati siano corretti.
Se hai seguito la documentazione di SlimeVR, i valori predefiniti dovrebbero essere corretti
firmware_tool-board_pins_step-enable_led = Abilita LED
firmware_tool-board_pins_step-led_pin =
.label = Pin LED
.placeholder = Inserisci l'indirizzo del Pin LED
firmware_tool-board_pins_step-battery_type = Seleziona il tipo di batteria
firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = Batteria esterna
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = Batteria interna
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = MCP3021 interno
firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = MCP3021
firmware_tool-board_pins_step-battery_sensor_pin =
.label = Pin del sensore della batteria
.placeholder = Inserisci l'indirizzo del sensore della batteria
firmware_tool-board_pins_step-battery_resistor =
.label = Resistenza della batteria (Ohm)
.placeholder = Inserisci il valore della resistenza della batteria
firmware_tool-board_pins_step-battery_shield_resistor-0 =
.label = Shield R1 della batteria (Ohm)
.placeholder = Inserisci il valore dello Shield R1 della batteria
firmware_tool-board_pins_step-battery_shield_resistor-1 =
.label = Shield R2 della batteria (Ohm)
.placeholder = Inserisci il valore dello Shield R2 della batteria
firmware_tool-add_imus_step = Specifica i tuoi IMU
firmware_tool-add_imus_step-description =
Per piacere aggiungi le IMU del tuo tracker
Se hai seguito la documentazione di SlimeVR, i valori predefiniti dovrebbero essere corretti
firmware_tool-add_imus_step-imu_type-label = Tipo dell'IMU
firmware_tool-add_imus_step-imu_type-placeholder = Seleziona il tipo dell'IMU
firmware_tool-add_imus_step-imu_rotation =
.label = Rotazione dell'IMU (gradi)
.placeholder = Angolo di rotazione dell'IMU
firmware_tool-add_imus_step-scl_pin =
.label = Pin SLC
.placeholder = Indirizzo del Pin SLC
firmware_tool-add_imus_step-sda_pin =
.label = Pin SDA
.placeholder = Indirezzo del Pin SDA
firmware_tool-add_imus_step-int_pin =
.label = Pin INT
.placeholder = Indirizzo del Pin INT
firmware_tool-add_imus_step-optional_tracker =
.label = Tracker opzionale
firmware_tool-add_imus_step-show_less = Mostra meno
firmware_tool-add_imus_step-show_more = Mostra di più
firmware_tool-add_imus_step-add_more = Aggiungere altre IMU
firmware_tool-select_firmware_step = Seleziona la versione del firmware
firmware_tool-select_firmware_step-description = Per piacere scegli la versione del firmware che desideri utilizzare
firmware_tool-select_firmware_step-show-third-party =
.label = Mostra firmware di terze parti
firmware_tool-flash_method_step = Metodo di flashing
firmware_tool-flash_method_step-description = Seleziona il metodo di flashing che desideri utilizzare
firmware_tool-flash_method_step-ota =
.label = OTA
.description = Usa il metodo via rete. Il tuo tracker utilizzerà il Wi-Fi per aggiornare il suo firmware. Funziona solo su tracker già configurati.
firmware_tool-flash_method_step-serial =
.label = Seriale
.description = Usa un cavo USB per aggiornare il tracker.
firmware_tool-flashbtn_step = Premi il pulsante di avvio
firmware_tool-flashbtn_step-description = Prima di passare al passaggio successivo, ci sono alcune cose che devi fare
firmware_tool-flashbtn_step-board_SLIMEVR = Spegni il tracker, rimuovi la custodia (se presente), collega un cavo USB a questo computer, quindi esegui uno dei seguenti passaggi in base alla revisione della tua scheda SlimeVR:
firmware_tool-flashbtn_step-board_SLIMEVR-r11 = Accendi il tracker mentre cortocircuiti il pad rettangolare FLASH, il secondo pad contando dal bordo superiore della scheda, e lo shield metallico del microcontroller
firmware_tool-flashbtn_step-board_SLIMEVR-r12 = Accendi il tracker mentre cortocircuiti il pad circolare FLASH, il pad vicino al bordo superiore della scheda, e lo shield metallico del microcontroller
firmware_tool-flashbtn_step-board_SLIMEVR-r14 = Accendi il tracker mentre premi il pulsante FLASH sul lato superiore della scheda
firmware_tool-flashbtn_step-board_OTHER =
Prima di eseguire il flashing, sarà probabilmente necessario mettere il tracker in modalità bootloader.
La maggior parte delle volte significa premere il pulsante di avvio sulla scheda prima che inizi il processo di flashing.
Se il processo di flashing fa timeout all'inizio del flashing, probabilmente significa che il tracker non era in modalità bootloader
Si prega di fare riferimento alle istruzioni di flashing della scheda per sapere come attivare la modalità boatloader
firmware_tool-flash_method_ota-devices = Dispositivi OTA rilevati:
firmware_tool-flash_method_ota-no_devices = Non ci sono schede che possono essere aggiornate utilizzando OTA, assicurati di aver selezionato il tipo di scheda corretto
firmware_tool-flash_method_serial-wifi = Credenziali Wi-Fi:
firmware_tool-flash_method_serial-devices-label = Dispositivi seriali rilevati:
firmware_tool-flash_method_serial-devices-placeholder = Seleziona un dispositivo seriale
firmware_tool-flash_method_serial-no_devices = Non sono stati rilevati dispositivi seriali compatibili, assicurarsi che il tracker sia collegato
firmware_tool-build_step = Compilazione
firmware_tool-build_step-description = Il firmware è in fase di compilazione, attendere
firmware_tool-flashing_step = Flashing
firmware_tool-flashing_step-description = Stiamo flashando I tuoi tracker, per piacere segui le istruzioni sullo schermo
firmware_tool-flashing_step-warning = Non scollegare o riavviare il tracker durante il processo di caricamento a meno che non venga richiesto, potrebbe rendere la scheda inutilizzabile
firmware_tool-flashing_step-flash_more = Esegui il flashing di altri tracker
firmware_tool-flashing_step-exit = Esci
## firmware tool build status
firmware_tool-build-CREATING_BUILD_FOLDER = Creazione della cartella di compilazione
firmware_tool-build-DOWNLOADING_FIRMWARE = Scaricamento del firmware
firmware_tool-build-EXTRACTING_FIRMWARE = Estrazione del firmware
firmware_tool-build-SETTING_UP_DEFINES = Configurazione delle definizioni del firmware
firmware_tool-build-BUILDING = Compilazione del firmware
firmware_tool-build-SAVING = Salvataggio del codice compilato
firmware_tool-build-DONE = Compilazione completata
firmware_tool-build-ERROR = Impossibile compilare il firmware
## Firmware update status
firmware_update-status-DOWNLOADING = Scaricamento del firmware
firmware_update-status-NEED_MANUAL_REBOOT = In attesa che l'utente riavvii il tracker
firmware_update-status-AUTHENTICATING = Autenticazione con l'MCU
firmware_update-status-UPLOADING = Caricamento del firmware
firmware_update-status-SYNCING_WITH_MCU = Sincronizzazione con l'MCU
firmware_update-status-REBOOTING = Riavvio del tracker
firmware_update-status-PROVISIONING = Impostazione delle credenziali Wi-Fi
firmware_update-status-DONE = Aggiornamento completato!
firmware_update-status-ERROR_DEVICE_NOT_FOUND = Impossibile trovare il dispositivo
firmware_update-status-ERROR_TIMEOUT = Timeout del processo di aggiornamento
firmware_update-status-ERROR_DOWNLOAD_FAILED = Impossibile scaricare il firmware
firmware_update-status-ERROR_AUTHENTICATION_FAILED = Impossibile eseguire l'autenticazione con l'MCU
firmware_update-status-ERROR_UPLOAD_FAILED = Impossibile caricare il firmware
firmware_update-status-ERROR_PROVISIONING_FAILED = Impossibile impostare le credenziali Wi-Fi
firmware_update-status-ERROR_UNSUPPORTED_METHOD = Il metodo di aggiornamento non è supportato
firmware_update-status-ERROR_UNKNOWN = Errore sconosciuto
## Dedicated Firmware Update Page
firmware_update-title = Aggiornamento del firmware
firmware_update-devices = Dispositivi disponibili
firmware_update-devices-description = Seleziona i tracker che desideri aggiornare all'ultima versione del firmware di SlimeVR
firmware_update-no_devices = Assicurati che i tracker che desideri aggiornare siano accesi e connessi al Wi-Fi!
firmware_update-changelog-title = Aggiornamento a { $version }
firmware_update-looking_for_devices = Ricerca in corso di dispositivi da aggiornare...
firmware_update-retry = Riprova
firmware_update-update = Aggiorna i tracker selezionati
firmware_update-exit = Esci
## Tray Menu
tray_menu-show = Mostra
+14 -137
View File
@@ -50,18 +50,6 @@ body_part-LEFT_UPPER_LEG = Linkerdij
body_part-LEFT_LOWER_LEG = Linkerenkel
body_part-LEFT_FOOT = Linkervoet
## BoardType
board_type-NODEMCU = NodeMCU
board_type-WROOM32 = WROOM32
board_type-WEMOSD1MINI = Wemos D1 Mini
board_type-TTGO_TBASE = TTGO T-Base
board_type-ESP01 = ESP-01
board_type-SLIMEVR = SlimeVR
board_type-LOLIN_C3_MINI = Lolin C3 Mini
board_type-BEETLE32C3 = Beetle ESP32-C3
board_type-ES32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
## Proportions
skeleton_bone-NONE = Geen
@@ -93,8 +81,6 @@ skeleton_bone-ELBOW_OFFSET = Elleboogoffset
## Tracker reset buttons
reset-reset_all = Alle afmetingen resetten
reset-reset_all_warning-reset = Verhoudingen resetten
reset-reset_all_warning-cancel = Annuleren
reset-full = Volledige reset
reset-mounting = Reset montage
reset-yaw = Yaw Reset
@@ -156,12 +142,9 @@ widget-developer_mode-more_info = Meer informatie
## Widget: IMU Visualizer
widget-imu_visualizer = Rotatie
widget-imu_visualizer-preview = Voorbeeld
widget-imu_visualizer-hide = Verbergen
widget-imu_visualizer-rotation_raw = Rauw
widget-imu_visualizer-rotation_preview = Preview
widget-imu_visualizer-acceleration = Versnelling
widget-imu_visualizer-position = Positie
widget-imu_visualizer-rotation_hide = Verbergen
## Widget: Skeleton Visualizer
@@ -213,17 +196,9 @@ tracker-infos-url = Tracker URL
tracker-infos-version = Firmware versie
tracker-infos-hardware_rev = Hardware revisie
tracker-infos-hardware_identifier = Hardware-id
tracker-infos-data_support = Gegevensondersteuning
tracker-infos-imu = IMU-sensor
tracker-infos-board_type = Mainbord
tracker-infos-network_version = Protocol Versie
tracker-infos-magnetometer = Magnetometer
tracker-infos-magnetometer-status-v1 =
{ $status ->
[DISABLED] Uitgeschakeld
[ENABLED] Ingeschakeld
*[NOT_SUPPORTED] Niet ondersteund
}
## Tracker settings
@@ -238,7 +213,6 @@ tracker-settings-mounting_section-edit = Montage bewerken
tracker-settings-drift_compensation_section = Laat drift compensatie toe
tracker-settings-drift_compensation_section-description = Moet deze tracker compenseren voor drift wanneer drift compensatie is ingeschakeld?
tracker-settings-drift_compensation_section-edit = Laat drift compensatie toe
tracker-settings-use_mag-label = Laat magnetometer toe
# The .<name> means it's an attribute and it's related to the top key.
# In this case that is the settings for the assignment section.
tracker-settings-name_section = Trackernaam
@@ -322,7 +296,6 @@ settings-sidebar-utils = Hulpmiddelen
settings-sidebar-serial = Serieel console
settings-sidebar-appearance = Uiterlijk
settings-sidebar-notifications = Notificaties
settings-sidebar-advanced = Geavanceerd
## SteamVR settings
@@ -375,19 +348,11 @@ settings-general-tracker_mechanics-drift_compensation-description =
Compenseert voor IMU yaw drift door de toevoeging van een omgekeerde rotatie.
Veranderd de sterkte van de compensatie en hoeveel resets worden gebruikt.
settings-general-tracker_mechanics-drift_compensation-enabled-label = Drift compensate
settings-general-tracker_mechanics-drift_compensation-prediction = Voorspelling van driftcompensatie
settings-general-tracker_mechanics-drift_compensation-prediction-label = Voorspelling van driftcompensatie
settings-general-tracker_mechanics-drift_compensation_warning-cancel = Annuleren
settings-general-tracker_mechanics-drift_compensation-amount-label = Compensatiesterkte
settings-general-tracker_mechanics-drift_compensation-max_resets-label = Gebruik de laatste x resets
settings-general-tracker_mechanics-save_mounting_reset = Sla de automatische montage reset kalibratie op
settings-general-tracker_mechanics-save_mounting_reset-description = Slaat de automatische montage reset kalibraties van de trackers op tussen herstarts. Nuttig als je een pak draagt waarbij trackers niet bewegen tussen sessies. <b>Niet aanbevolen voor normale gebruikers!</b>
settings-general-tracker_mechanics-save_mounting_reset-enabled-label = Montage configuratie opslaan
settings-general-tracker_mechanics-use_mag_on_all_trackers = Gebruik de magnetometer op alle IMU-trackers die dit ondersteunen
settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
Gebruikt magnetometer op alle trackers die er een compatibele firmware voor hebben, waardoor drift in stabiele magnetische omgevingen wordt verminderd.
Je kan dit per individuele tracker uit zetten in de instellingen van de tracker. <b>Sluit geen van de trackers af terwijl u dit in- en uitschakelt!</b>
settings-general-tracker_mechanics-use_mag_on_all_trackers-label = Gebruik magnetometer op de trackers
## FK/Tracking settings
@@ -487,9 +452,6 @@ settings-general-interface-dev_mode = Ontwikkelaarsmodus
settings-general-interface-dev_mode-description = Deze modus kan nuttig zijn als je diepgaande gegevens nodig hebt of op een geavanceerd niveau wilt communiceren met aangesloten trackers.
settings-general-interface-dev_mode-label = Ontwikkelaarsmodus
settings-general-interface-theme = Themakleur
settings-general-interface-show-navbar-onboarding = Toon "{ navbar-onboarding }" op de navigatiebalk
settings-general-interface-show-navbar-onboarding-description = Dit verandert of de knop "{ navbar-onboarding }" wordt weergegeven op de navigatiebalk.
settings-general-interface-show-navbar-onboarding-label = Toon "{ navbar-onboarding }"
settings-general-interface-lang = Selecteer taal
settings-general-interface-lang-description = Verander de standaardtaal die je wilt gebruiken.
settings-general-interface-lang-placeholder = Selecteer de te gebruiken taal
@@ -501,9 +463,6 @@ settings-interface-appearance-font-os_font = Besturingssysteem lettertype
settings-interface-appearance-font-slime_font = Standaard lettertype
settings-interface-appearance-font_size = Standaard lettertype grote
settings-interface-appearance-font_size-description = Dit past het lettertype grote aan voor het gehele interfeace, behalve voor deze instellingen pagina.
settings-interface-appearance-decorations = Gebruik het systeem native decoraties
settings-interface-appearance-decorations-description = Dit zal de bovenste balk van de interface niet weergeven en zal in plaats daarvan die van het besturingssysteem gebruiken.
settings-interface-appearance-decorations-label = Gebruik de native decoraties
## Notification settings
@@ -630,6 +589,12 @@ settings-osc-vmc-network-address-description = Stel het adres in waarnaar gegeve
settings-osc-vmc-network-address-placeholder = IPV4-adres
settings-osc-vmc-vrm = VRM Model
settings-osc-vmc-vrm-description = Laad een VRM-model om hoofdverankering mogelijk te maken en zorg voor een hogere compatibiliteit met andere applicaties.
settings-osc-vmc-vrm-model_unloaded = Geen model geladen
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] Model geladen: { $name }
*[other] Ongetitelde model geladen
}
settings-osc-vmc-vrm-file_select = Sleep een modelbestand naar hier om ze te gebruiken of <u>blader</u>.
settings-osc-vmc-anchor_hip = Heupverankering
settings-osc-vmc-anchor_hip-description = Veranker de tracking aan de heupen, handig voor zittende VTubing. Als u deze uitschakelt, laadt u een VRM-model.
@@ -638,24 +603,6 @@ settings-osc-vmc-mirror_tracking = Gespiegelde tracking
settings-osc-vmc-mirror_tracking-description = De tracking horizontaal spiegelen.
settings-osc-vmc-mirror_tracking-label = Gespiegelde tracking
## Advanced settings
settings-utils-advanced = Geavanceerd
settings-utils-advanced-reset-gui = GUI-instellingen resetten
settings-utils-advanced-reset-gui-description = Herstel de standaardwaarden voor instellingen van de interface.
settings-utils-advanced-reset-gui-label = GUI resetten
settings-utils-advanced-reset-server = Tracker instellingen resetten
settings-utils-advanced-reset-server-description = Herstel de standaardwaarden voor instellingen van de tracking.
settings-utils-advanced-reset-server-label = Tracking resetten
settings-utils-advanced-reset-all = Alle instellingen resetten
settings-utils-advanced-reset-all-description = Herstel de standaardwaarden voor instellingen van beide de interface en de tracking.
settings-utils-advanced-reset-all-label = Alles resetten
settings-utils-advanced-reset_warning-reset = Instellingen resetten
settings-utils-advanced-reset_warning-cancel = Annuleren
settings-utils-advanced-open_data = Gegevensmap
settings-utils-advanced-open_data-description = Open de gegevensmap van SlimeVR in de bestandsverkenner, met configuratie- en logbestanden.
settings-utils-advanced-open_data-label = Map openen
## Setup/onboarding menu
onboarding-skip = Setupgids overslaan
@@ -681,7 +628,6 @@ onboarding-wifi_creds-submit = Verzenden!
onboarding-wifi_creds-ssid =
.label = WiFi naam
.placeholder = Vul WiFi naam in
onboarding-wifi_creds-ssid-required = Wi-Fi-naam is vereist
onboarding-wifi_creds-password =
.label = Paswoord
.placeholder = Vul paswoord in
@@ -739,7 +685,6 @@ onboarding-connect_tracker-issue-serial = Ik heb problemen met verbinden!
onboarding-connect_tracker-usb = USB Tracker
onboarding-connect_tracker-connection_status-none = Op zoek naar trackers
onboarding-connect_tracker-connection_status-serial_init = Verbinding maken met een serieel apparaat
onboarding-connect_tracker-connection_status-obtaining_mac_address = Het mac-adres van de tracker verkrijgen
onboarding-connect_tracker-connection_status-provisioning = Wifi-inloggegevens verzenden
onboarding-connect_tracker-connection_status-connecting = Wifi-inloggegevens verzenden
onboarding-connect_tracker-connection_status-looking_for_server = Op zoek naar server
@@ -769,7 +714,6 @@ onboarding-calibration_tutorial-status-waiting = Ik wacht op jou
onboarding-calibration_tutorial-status-calibrating = Kalibreren
onboarding-calibration_tutorial-status-success = Aardig!
onboarding-calibration_tutorial-status-error = De tracker werd verplaatst
onboarding-calibration_tutorial-skip = Tutorial overslaan
## Tracker assignment tutorial
@@ -893,11 +837,11 @@ onboarding-choose_mounting = Welke montagekalibratiemethode moet worden gebruikt
# Multiline text
onboarding-choose_mounting-description = De oriëntatie van de montage corrigeert de plaatsing van trackers op uw lichaam.
onboarding-choose_mounting-auto_mounting = Automatische bevestiging
# Italicized text
# Italized text
onboarding-choose_mounting-auto_mounting-label-v2 = Aanbevolen
onboarding-choose_mounting-auto_mounting-description = Dit detecteert automatisch de montagerichtingen voor al uw trackers door middel van 2 poses
onboarding-choose_mounting-manual_mounting = Handmatige bevestiging
# Italicized text
# Italized text
onboarding-choose_mounting-manual_mounting-label-v2 = Misschien niet precies genoeg
onboarding-choose_mounting-manual_mounting-description = Hiermee kunt u de montagerichting handmatig kiezen voor elke tracker
# Multiline text
@@ -944,13 +888,13 @@ onboarding-choose_proportions-description-v1 =
Als de verhoudingen van je lichaam niet overeenkomen met de opgeslagen waarden, zal de tracking-precisie slechter zijn. Je kunt dan last krijgen van ongemakkelijke effecten zoals schuiven of glijden, of kan je lichaam niet goed overeenkomen met je avatar in VR.
<b>Je hoeft je lichaam maar één keer te meten!</b> Tenzij de metingen onjuist zijn of je lichaam is veranderd, hoef je dit niet opnieuw te doen.
onboarding-choose_proportions-auto_proportions = Automatische verhoudingen
# Italicized text
# Italized text
onboarding-choose_proportions-auto_proportions-subtitle = Aanbevolen
onboarding-choose_proportions-auto_proportions-descriptionv3 =
Deze functie zal je lichaamsverhoudingen schatten door een sample van je bewegingen op te nemen en deze door een algoritme te laten analyseren.
<b>Hiervoor moet je headset (HMD) verbonden zijn met SlimeVR en op je hoofd zitten!</b>
onboarding-choose_proportions-manual_proportions = Handmatige lichaamsverhoudingen
# Italicized text
# Italized text
onboarding-choose_proportions-manual_proportions-subtitle = Voor kleine details
onboarding-choose_proportions-manual_proportions-description = Hier kan je jouw verhoudingen handmatig aanpassen
onboarding-choose_proportions-export = Export proporties
@@ -1025,10 +969,9 @@ onboarding-automatic_proportions-verify_results-redo = Opname opnieuw doen
onboarding-automatic_proportions-verify_results-confirm = Ze zijn correct
onboarding-automatic_proportions-done-title = Lichaam gemeten en opgeslagen.
onboarding-automatic_proportions-done-description = Je kalibratie voor lichaamsverhoudingen is voltooid!
onboarding-automatic_proportions-error_modal-v2 =
<b>Waarschuwing:</b> Er is een fout opgetreden bij het schatten van de verhoudingen!
Dit is waarschijnlijk een probleem met de montagekalibratie. Zorg ervoor dat je tracking goed werkt voordat je het opnieuw probeert.
<docs>Bekijk de documentatie</docs> of word lid van onze <discord>Discord</discord> voor hulp ^_^
onboarding-automatic_proportions-error_modal =
<b>Waarschuwing:</b> Er is een error ontstaan bij het schatten van de proporties!
Check alsjeblieft <docs>de docs</docs> of join onze <discord>Discord</Discord> voor hulp ^_^
onboarding-automatic_proportions-error_modal-confirm = Begrepen!
## Home
@@ -1055,72 +998,6 @@ status_system-StatusSteamVRDisconnected =
status_system-StatusTrackerError = De { $trackerName } tracker heeft een error.
status_system-StatusUnassignedHMD = De VR-headset moet worden toegewezen als hoofdtracker.
## Firmware tool globals
firmware_tool-next_step = Volgende stap
firmware_tool-previous_step = Vorige stap
firmware_tool-ok = Ziet er goed uit
firmware_tool-retry = Opnieuw
firmware_tool-loading = Laden...
## Firmware tool Steps
firmware_tool = DIY firmware-tool
firmware_tool-description = Hiermee kunt u uw DIY-trackers configureren en flashen
firmware_tool-not_available = Oeps, de firmwaretool is momenteel niet beschikbaar. Kom later terug!
firmware_tool-not_compatible = De firmwaretool is niet compatibel met deze versie van de server. Gelieve te updaten!
firmware_tool-board_step = Selecteer je bord
firmware_tool-board_step-description = Selecteer een van de onderstaande borden.
firmware_tool-board_pins_step = Controleer de pinnen
firmware_tool-board_pins_step-description =
Controleer of de geselecteerde pinnen correct zijn.
Als je de SlimeVR-documentatie hebt gevolgd, zouden de standaardwaarden correct moeten zijn
firmware_tool-board_pins_step-enable_led = LED inschakelen
firmware_tool-board_pins_step-led_pin =
.label = LED-pin
.placeholder = Voer het adres van de LED-pin in
firmware_tool-build_step = Aan het bouwen
firmware_tool-build_step-description = De firmware wordt gebouwd, even geduld a.u.b.
firmware_tool-flashing_step = Firmware aan het uploaden
firmware_tool-flashing_step-description = Je trackers worden geflashed, volg de instructies op het scherm
firmware_tool-flashing_step-warning = Trek de tracker niet los en start hem niet opnieuw op tijdens het uploadproces, tenzij dit wordt verteld, hierdoor kan je bord onbruikbaar worden
firmware_tool-flashing_step-flash_more = Flash meer trackers
firmware_tool-flashing_step-exit = Sluit
## firmware tool build status
firmware_tool-build-CREATING_BUILD_FOLDER = De buildmap maken
firmware_tool-build-DOWNLOADING_FIRMWARE = Firmware wordt gedownload
firmware_tool-build-EXTRACTING_FIRMWARE = Firmware wordt uitgepakt
firmware_tool-build-SETTING_UP_DEFINES = Configureren van de definities
firmware_tool-build-BUILDING = Firmware wordt gebouwd
firmware_tool-build-ERROR = Kan de firmware niet bouwen
## Firmware update status
firmware_update-status-DOWNLOADING = Firmware wordt gedownload
firmware_update-status-UPLOADING = Firmware wordt geüpload
firmware_update-status-PROVISIONING = Wi-Fi-inloggegevens instellen
firmware_update-status-DONE = Update voltooid!
firmware_update-status-ERROR_DEVICE_NOT_FOUND = Kan het apparaat niet vinden
firmware_update-status-ERROR_TIMEOUT = Er is een time-out opgetreden voor het updateproces
firmware_update-status-ERROR_DOWNLOAD_FAILED = Kan de firmware niet downloaden
firmware_update-status-ERROR_UPLOAD_FAILED = Kan de firmware niet uploaden
firmware_update-status-ERROR_PROVISIONING_FAILED = Kan de Wi-Fi-inloggegevens niet instellen
firmware_update-status-ERROR_UNSUPPORTED_METHOD = De updatemethode wordt niet ondersteund
firmware_update-status-ERROR_UNKNOWN = Onbekende fout
## Dedicated Firmware Update Page
firmware_update-title = Firmware-update
firmware_update-devices = Beschikbare apparaten
firmware_update-devices-description = Selecteer de trackers die u wilt updaten naar de nieuwste versie van SlimeVR-firmware
firmware_update-no_devices = Zorg er alsjeblieft voor dat de trackers die je wilt updaten AAN staan en verbonden zijn met de Wi-Fi!
firmware_update-changelog-title = Bijwerken naar { $version }
firmware_update-looking_for_devices = Op zoek naar apparaten om bij te werken...
firmware_update-retry = Opnieuw
firmware_update-update = Geselecteerde trackers bijwerken
## Tray Menu
tray_menu-show = Weergeven
+6 -7
View File
@@ -49,12 +49,6 @@ body_part-LEFT_HAND = Mão esquerda
body_part-LEFT_UPPER_LEG = Coxa esquerda
body_part-LEFT_LOWER_LEG = Canela esquerda
body_part-LEFT_FOOT = Pé esquerdo
body_part-LEFT_THUMB_METACARPAL = Metacarpo do polegar esquerdo
body_part-LEFT_THUMB_PROXIMAL = Proximal do polegar esquerdo
body_part-LEFT_THUMB_DISTAL = Distal do polegar esquerdo
body_part-LEFT_INDEX_PROXIMAL = Indicador esquerdo proximal
body_part-LEFT_INDEX_INTERMEDIATE = Indicador esquerdo intermediário
body_part-LEFT_INDEX_DISTAL = Indicador esquerdo distal
## Proportions
@@ -652,7 +646,12 @@ settings-osc-vmc-network-address-description = Escolha o endereço para envio de
settings-osc-vmc-network-address-placeholder = Endereço IPV4
settings-osc-vmc-vrm = Modelo VRM
settings-osc-vmc-vrm-description = Carregue um modelo de VRM para permitir ancoragem de cabeça e possibilitar uma maior compatibilidade com outras aplicações.
settings-osc-vmc-vrm-untitled_model = Modelo sem título
settings-osc-vmc-vrm-model_unloaded = Nenhum modelo carregado
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] Modelo carregado: { $name }
*[other] Modelo sem título carregado
}
settings-osc-vmc-vrm-file_select = Arraste e solte um modelo para usar, ou <u>navegue</u>
settings-osc-vmc-anchor_hip = Ancorar no quadril
settings-osc-vmc-anchor_hip-description = Ancorar o rastreamento no quadril, útil para VTubing sentado. Se desativar, carregue um modelo VRM.
+16 -278
View File
@@ -49,50 +49,6 @@ body_part-LEFT_HAND = 左手
body_part-LEFT_UPPER_LEG = 左大腿
body_part-LEFT_LOWER_LEG = 左小腿
body_part-LEFT_FOOT = 左脚
body_part-LEFT_THUMB_METACARPAL = 左拇指掌骨
body_part-LEFT_THUMB_PROXIMAL = 左拇指近端
body_part-LEFT_THUMB_DISTAL = 左拇指远端
body_part-LEFT_INDEX_PROXIMAL = 左食指近端
body_part-LEFT_INDEX_INTERMEDIATE = 左食指中端
body_part-LEFT_INDEX_DISTAL = 左食指远端
body_part-LEFT_MIDDLE_PROXIMAL = 左中指近端
body_part-LEFT_MIDDLE_INTERMEDIATE = 左中指中端
body_part-LEFT_MIDDLE_DISTAL = 左中指远端
body_part-LEFT_RING_PROXIMAL = 左环指近端
body_part-LEFT_RING_INTERMEDIATE = 左环指中端
body_part-LEFT_RING_DISTAL = 左环指远端
body_part-LEFT_LITTLE_PROXIMAL = 左小指近端
body_part-LEFT_LITTLE_INTERMEDIATE = 左小指中端
body_part-LEFT_LITTLE_DISTAL = 左小指远端
body_part-RIGHT_THUMB_METACARPAL = 右拇指掌骨
body_part-RIGHT_THUMB_PROXIMAL = 右拇指近端
body_part-RIGHT_THUMB_DISTAL = 右拇指远端
body_part-RIGHT_INDEX_PROXIMAL = 右食指近端
body_part-RIGHT_INDEX_INTERMEDIATE = 右食指中端
body_part-RIGHT_INDEX_DISTAL = 右食指远端
body_part-RIGHT_MIDDLE_PROXIMAL = 右中指近端
body_part-RIGHT_MIDDLE_INTERMEDIATE = 右中指中端
body_part-RIGHT_MIDDLE_DISTAL = 右中指远端
body_part-RIGHT_RING_PROXIMAL = 右环指近端
body_part-RIGHT_RING_INTERMEDIATE = 右环指中端
body_part-RIGHT_RING_DISTAL = 右环指远端
body_part-RIGHT_LITTLE_PROXIMAL = 右小指近端
body_part-RIGHT_LITTLE_INTERMEDIATE = 右小指中端
body_part-RIGHT_LITTLE_DISTAL = 右小指远端
## BoardType
board_type-UNKNOWN = 未知
board_type-NODEMCU = NodeMCU
board_type-CUSTOM = 自定义开发板
board_type-WROOM32 = WROOM32
board_type-WEMOSD1MINI = Wemos D1 Mini
board_type-TTGO_TBASE = TTGO T-Base
board_type-ESP01 = ESP-01
board_type-SLIMEVR = SlimeVR
board_type-LOLIN_C3_MINI = Lolin C3 Mini
board_type-BEETLE32C3 = Beetle ESP32-C3
board_type-ES32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
## Proportions
@@ -130,10 +86,6 @@ reset-reset_all_warning =
您确定要执行此操作吗?
reset-reset_all_warning-reset = 重置身体比例
reset-reset_all_warning-cancel = 取消
reset-reset_all_warning_default =
<b>警告:</b> 您当前没有设置身高,
这样将使用默认身高计算身体比例。
您确定要执行此操作吗?
reset-full = 完整重置
reset-mounting = 重置佩戴
reset-yaw = 重置航向轴
@@ -252,17 +204,9 @@ tracker-infos-url = 追踪器地址
tracker-infos-version = 固件版本
tracker-infos-hardware_rev = 硬件版本
tracker-infos-hardware_identifier = 硬件ID
tracker-infos-data_support = 数据类型
tracker-infos-imu = IMU型号
tracker-infos-board_type = 主板型号
tracker-infos-network_version = 协议版本
tracker-infos-magnetometer = 磁力计
tracker-infos-magnetometer-status-v1 =
{ $status ->
[DISABLED] 已禁用
[ENABLED] 已启用
*[NOT_SUPPORTED] 不支持
}
## Tracker settings
@@ -277,27 +221,14 @@ tracker-settings-mounting_section-edit = 编辑佩戴
tracker-settings-drift_compensation_section = 允许漂移补偿
tracker-settings-drift_compensation_section-description = 是否在此追踪器上应用漂移补偿?
tracker-settings-drift_compensation_section-edit = 允许漂移补偿
tracker-settings-use_mag = 允许使用这个追踪器的磁力计
# Multiline!
tracker-settings-use_mag-description =
如果「在追踪器上启用磁力计」已启用,是否要在这个追踪器上启用它来减轻飘移?<b>切换本选项时请勿关闭追踪器的电源!</b>
请先启用「在追踪器上启用磁力计」功能,<magSetting>点选此处以移动至该设定</magSetting>。
tracker-settings-use_mag-label = 允许使用这个追踪器的磁力计
# The .<name> means it's an attribute and it's related to the top key.
# In this case that is the settings for the assignment section.
tracker-settings-name_section = 追踪器名称
tracker-settings-name_section-description = 给它起一个可爱的名字吧=w=~
tracker-settings-name_section-placeholder = CC 封印着漆黑之力的漆黑左臂
tracker-settings-name_section-label = 追踪器名称
tracker-settings-forget = 忘记追踪器
tracker-settings-forget-description = 从 SlimeVR 服务器中移除该追踪器,并在服务器重启前不再连接这一追踪器。追踪器的配置信息不会被清除。
tracker-settings-forget-label = 忘记追踪器
tracker-settings-update-unavailable = 无法升级(DIY)
tracker-settings-update-up_to_date = 已是最新
tracker-settings-update-available = { $versionName } 现在可用
tracker-settings-update = 立即更新
tracker-settings-update-title = 固件版本
## Tracker part card info
@@ -373,7 +304,6 @@ settings-sidebar-utils = 工具
settings-sidebar-serial = 串口控制台
settings-sidebar-appearance = 外观
settings-sidebar-notifications = 通知
settings-sidebar-firmware-tool = DIY固件工具
settings-sidebar-advanced = 高级选项
## SteamVR settings
@@ -450,11 +380,6 @@ settings-general-tracker_mechanics-save_mounting_reset-description =
在SlimeVR服务器关闭时保留追踪器自动佩戴重置结果。适用于一体式动捕服等
追踪器佩戴位置保持不变的场景。<b>不建议普通用户使用!</b>
settings-general-tracker_mechanics-save_mounting_reset-enabled-label = 保存佩戴重置
settings-general-tracker_mechanics-use_mag_on_all_trackers = 在支持的 IMU 追踪器上启用磁力计
settings-general-tracker_mechanics-use_mag_on_all_trackers-description =
在所有有固件支持的追踪器上启用磁力计,在磁场稳定的环境中可以减轻飘移。
可以在个别追踪器上禁用本功能。<b>切换此选项时请勿关闭任何一个追踪器的电源!</b>
settings-general-tracker_mechanics-use_mag_on_all_trackers-label = 在追踪器上启用磁力计
## FK/Tracking settings
@@ -478,11 +403,6 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = 脚掌着地会
settings-general-fk_settings-leg_fk = 腿部追踪
settings-general-fk_settings-leg_fk-reset_mounting_feet-description = 开启脚部佩戴重置。(佩戴重置时需要踮起脚尖)
settings-general-fk_settings-leg_fk-reset_mounting_feet = 脚部佩戴重置
settings-general-fk_settings-enforce_joint_constraints = 骨骼限制
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = 强制约束
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = 避免关节旋转超过人体骨骼角度限制
settings-general-fk_settings-enforce_joint_constraints-correct_constraints = 使用约束修正
settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = 当关节旋转超过人体骨骼角度限制时进行修正
settings-general-fk_settings-arm_fk = 手臂追踪
settings-general-fk_settings-arm_fk-description = 即使有手臂位置数据可用,也强制使用头显的数据追踪手臂。
settings-general-fk_settings-arm_fk-force_arms = 强制使用头显数据追踪手臂
@@ -698,7 +618,12 @@ settings-osc-vmc-network-address-description = 设置用来发送 VMC 数据的
settings-osc-vmc-network-address-placeholder = IPV4 地址
settings-osc-vmc-vrm = VRM 模型
settings-osc-vmc-vrm-description = 加载 VRM 模型以允许头部锚定,并增进与其他程序的兼容
settings-osc-vmc-vrm-untitled_model = 无标题模型
settings-osc-vmc-vrm-model_unloaded = 未加载模型
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] 已加载模型:{ $name }
*[other] 已加载未命名的模型
}
settings-osc-vmc-vrm-file_select = 拖曳文件或 <u>浏览文件</u> 以加载模型
settings-osc-vmc-anchor_hip = 髋部锚定
settings-osc-vmc-anchor_hip-description = 将追踪锚定在髋部,有利于坐姿进行虚拟直播。若本选项无法切换,请加载 VRM 模型。
@@ -762,7 +687,6 @@ onboarding-wifi_creds-submit = 提交!
onboarding-wifi_creds-ssid =
.label = SSID
.placeholder = 输入 SSID
onboarding-wifi_creds-ssid-required = Wi-Fi 名称为必填项
onboarding-wifi_creds-password =
.label = 密码
.placeholder = 输入密码
@@ -820,7 +744,6 @@ onboarding-connect_tracker-issue-serial = QAQ 我在连接时遇到问题!
onboarding-connect_tracker-usb = USB 追踪器
onboarding-connect_tracker-connection_status-none = 正在寻找追踪器
onboarding-connect_tracker-connection_status-serial_init = 正在连接到串口设备
onboarding-connect_tracker-connection_status-obtaining_mac_address = 获取追踪器的mac地址
onboarding-connect_tracker-connection_status-provisioning = 正在发送 Wi-Fi 凭据
onboarding-connect_tracker-connection_status-connecting = 正在发送 Wi-Fi 凭据
onboarding-connect_tracker-connection_status-looking_for_server = 正在寻找服务器
@@ -1026,15 +949,6 @@ onboarding-choose_proportions-manual_proportions = 手动调整身体比例
# Italicized text
onboarding-choose_proportions-manual_proportions-subtitle = 用于精细调整
onboarding-choose_proportions-manual_proportions-description = 这将需要你手动修改以调整你的身体比例
onboarding-choose_proportions-scaled_proportions = 标准身体比例
# Italized text
onboarding-choose_proportions-scaled_proportions-subtitle = 推荐新用户使用
# Multiline string
onboarding-choose_proportions-scaled_proportions-description =
这将根据您的身高和平均人体比例设置身体比例,可以获得基本的全身跟踪效果。
<b>这需要将您的头戴显示器 (HMD) 连接到 SlimeVR 并戴在头上!</b>
onboarding-choose_proportions-scaled_proportions-button = 标准身体比例
onboarding-choose_proportions-export = 导出身体比例
onboarding-choose_proportions-import = 导入身体比例
onboarding-choose_proportions-import-success = 导入成功
@@ -1068,32 +982,21 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
你的头戴设备正在向 SlimeVR 服务器回报位置信息(通常需要 SteamVR 正在运行且通过 SlimeVR 的 SteamVR 驱动连接到 SlimeVR)。
你的追踪器正常工作并能反应实际运动(进行过完整重置和佩戴重置,踢腿、弯腰、坐下等动作时虚拟骨骼向正确的方向弯曲)。
onboarding-automatic_proportions-requirements-next = 我已阅读
onboarding-automatic_proportions-check_height-title-v2 = 测量你的身高
onboarding-automatic_proportions-check_height-description-v2 = 您的头戴显示器 (HMD) 高度应略小于您的身高,因为头戴显示器会测量您眼睛的高度。此测量值将用作计算您身体比例的基准。
onboarding-automatic_proportions-check_height-title = 检查你的身高
onboarding-automatic_proportions-check_height-description = 我们会使用头戴设备回报的高度来推算您的实际身高,但我们仍建议您检查一下数值是否正确。
# All the text is in bold!
onboarding-automatic_proportions-check_height-calculation_warning-v2 = 在 <u>直立</u> 时开始测量以计算您的身高。小心不要将手举到高于头显,它们可能会影响测量结果!
onboarding-automatic_proportions-check_height-calculation_warning = 请<u>站直</u>后按下按钮以计算身高,按下后您有 3 秒钟来调整姿势。
onboarding-automatic_proportions-check_height-guardian_tip =
如果你正在使用一体机进行串流,请确保开启并设置了安全边界,
以获取正确的高度信息。
onboarding-automatic_proportions-check_height-fetch_height = 我站好了!
# Context is that the height is unknown
onboarding-automatic_proportions-check_height-unknown = 未知
# Shows an element below it
onboarding-automatic_proportions-check_height-hmd_height2 = 您的头戴显示器的高度是:
onboarding-automatic_proportions-check_height-measure-start = 开始测量
onboarding-automatic_proportions-check_height-measure-stop = 停止测量
onboarding-automatic_proportions-check_height-measure-reset = 重试测量
onboarding-automatic_proportions-check_height-next_step = 数值没问题
onboarding-automatic_proportions-check_floor_height-title = 测量您的地板高度(可选)
onboarding-automatic_proportions-check_floor_height-description = 在某些情况下,头戴显示器可能无法正确设置地板高度,从而导致头显测得的身高高于实际身高。您可以测量地板的“高度”以校正头显的高度。
# All the text is in bold!
onboarding-automatic_proportions-check_floor_height-calculation_warning = 如果您确定您的地板高度是正确的,则可以跳过此步骤。
onboarding-automatic_proportions-check_height-hmd_height1 = 你的头戴设备的高度是
# Shows an element below it
onboarding-automatic_proportions-check_floor_height-floor_height = 您的地板高度为:
onboarding-automatic_proportions-check_floor_height-measure-start = 开始测量
onboarding-automatic_proportions-check_floor_height-measure-stop = 停止测量
onboarding-automatic_proportions-check_floor_height-measure-reset = 重试测量
onboarding-automatic_proportions-check_floor_height-skip_step = 跳过这一步并保存
onboarding-automatic_proportions-check_floor_height-next_step = 使用测量的地板高度并保存
onboarding-automatic_proportions-check_height-height1 = 所以你的实际身高是
onboarding-automatic_proportions-check_height-next_step = 数值没问题
onboarding-automatic_proportions-start_recording-title = 准备录制运动
onboarding-automatic_proportions-start_recording-description = 我们现在要记录一些特定的姿势和动作。这些将在下一个屏幕中提示。当按钮被按下时,准备好开始!
onboarding-automatic_proportions-start_recording-next = 开始录制
@@ -1119,32 +1022,10 @@ onboarding-automatic_proportions-verify_results-redo = 重新录制
onboarding-automatic_proportions-verify_results-confirm = 他们是正确的!
onboarding-automatic_proportions-done-title = 身体数据已测量并保存。
onboarding-automatic_proportions-done-description = 你的身体比例校准已完成!
onboarding-automatic_proportions-error_modal-v2 =
<b>警告:</b> 估算身体比例时发生错误!
这可能是因为佩戴校准存在问题,请确保追踪器工作正常后再试一次。
<docs>请查看文档</docs> 或加入我们的 <discord>Discord</discord> 频道寻求帮助 ^_^
onboarding-automatic_proportions-error_modal =
<b>警告:</b> 推算身体比例时发生错误!
请 <docs>阅读文档</docs> 或加入我们的 <discord>Discord</discord> 寻求帮助 ^_^
onboarding-automatic_proportions-error_modal-confirm = 了解!
onboarding-automatic_proportions-smol_warning =
您配置的身高 { $height } 小于可接受的最小身高 { $minHeight }。
<b>请重新进行测量并确保测量结果是正确的。</b>
onboarding-automatic_proportions-smol_warning-cancel = 返回
## Tracker scaled proportions setup
onboarding-scaled_proportions-title = 标准身体比例
onboarding-scaled_proportions-description = 为了让 SlimeVR 追踪器正常使用,我们需要知道你的骨头的长度。将会使用人体平均骨骼比例,并缩放至您的身高。
onboarding-scaled_proportions-manual_height-title = 配置您的身高
onboarding-scaled_proportions-manual_height-description = 您的头戴显示器 (HMD) 高度应略小于您的身高,因为头戴显示器会测量您眼睛的高度。此高度将用作计算您身体比例的基准。
onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR 当前未连接到 SlimeVR,因此不能基于您的头戴显示器进行测量。 <b>请连接后再继续操作或查看文档!</b>
onboarding-scaled_proportions-manual_height-height = 您的头戴显示器的高度是
onboarding-scaled_proportions-manual_height-next_step = 保存并继续
## Tracker scaled proportions reset
onboarding-scaled_proportions-reset_proportion-title = 重置您的身体比例
onboarding-scaled_proportions-reset_proportion-description = 为了根据您的身高设置身体比例,您现在需要重置所有身体比例。这将清除您先前配置的所有身体比例并提供一个基础设置。
onboarding-scaled_proportions-done-title = 身体比例已设置
onboarding-scaled_proportions-done-description = 身体比例已根据您的身高进行设置。
## Home
@@ -1170,149 +1051,6 @@ status_system-StatusSteamVRDisconnected =
status_system-StatusTrackerError = { $trackerName } 追踪器发生错误
status_system-StatusUnassignedHMD = VR头显应被分配为头部追踪器。
## Firmware tool globals
firmware_tool-next_step = 下一步
firmware_tool-previous_step = 上一步
firmware_tool-ok = 看起来不错
firmware_tool-retry = 重试
firmware_tool-loading = 加载中...
## Firmware tool Steps
firmware_tool = DIY固件工具
firmware_tool-description = 允许您配置和烧录 DIY 追踪器固件
firmware_tool-not_available = 哦不,固件工具目前不可用。稍后再来!
firmware_tool-not_compatible = 固件工具与此版本的服务端不兼容。请更新您的服务端!
firmware_tool-board_step = 选择您的开发板
firmware_tool-board_step-description = 选择下列开发板之一
firmware_tool-board_pins_step = 检查引脚
firmware_tool-board_pins_step-description =
请验证所选引脚是否正确。
如果您遵循了 SlimeVR 文档,则默认值应该是正确的
firmware_tool-board_pins_step-enable_led = 启用 LED
firmware_tool-board_pins_step-led_pin =
.label = LED 引脚
.placeholder = 输入LED引脚的编号
firmware_tool-board_pins_step-battery_type = 选择电池测量电路类型
firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = 使用外接电阻与片内ADC测量(默认)
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = 使用片内低电量告警电路
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = 使用片内低电量告警电路与外接MCP3021测量
firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = 使用外接MCP3021测量
firmware_tool-board_pins_step-battery_sensor_pin =
.label = 电池检测引脚
.placeholder = 输入电池检测引脚的编号
firmware_tool-board_pins_step-battery_resistor =
.label = 电池外接串联电阻(欧姆)
.placeholder = 输入电池串联电阻的阻值
firmware_tool-board_pins_step-battery_shield_resistor-0 =
.label = 开发板载对地分压电阻R1(欧姆)
.placeholder = 请输入开发板载对地分压电阻 R1 的值。
firmware_tool-board_pins_step-battery_shield_resistor-1 =
.label = 开发板载对输入分压电阻 R2(欧姆)
.placeholder = 请输入开发板载对输入分压电阻 R2 的值。
firmware_tool-add_imus_step = 添加您的 IMU
firmware_tool-add_imus_step-description =
请添加您的追踪器所配备的 IMU 传感器。
如果您遵循了 SlimeVR 文档,默认值应该是正确的。
firmware_tool-add_imus_step-imu_type-label = IMU 类型
firmware_tool-add_imus_step-imu_type-placeholder = 选择 IMU 类型
firmware_tool-add_imus_step-imu_rotation =
.label = 追踪器旋转(度)
.placeholder = 追踪器旋转角度
firmware_tool-add_imus_step-scl_pin =
.label = SCL 引脚
.placeholder = SCL 引脚编号
firmware_tool-add_imus_step-sda_pin =
.label = SDA 引脚
.placeholder = SDA 引脚编号
firmware_tool-add_imus_step-int_pin =
.label = INT 引脚
.placeholder = INT 引脚编号
firmware_tool-add_imus_step-optional_tracker =
.label = 此 IMU 为可选扩展
firmware_tool-add_imus_step-show_less = 显示更少
firmware_tool-add_imus_step-show_more = 显示更多
firmware_tool-add_imus_step-add_more = 添加更多 IMU
firmware_tool-select_firmware_step = 选择固件版本
firmware_tool-select_firmware_step-description = 请选择您要使用的固件版本
firmware_tool-select_firmware_step-show-third-party =
.label = 显示第三方固件
firmware_tool-flash_method_step = 固件烧录方式
firmware_tool-flash_method_step-description = 请选择您要使用的固件烧录方式
firmware_tool-flash_method_step-ota =
.label = OTA
.description = 使用无线方式。您的追踪器将通过 Wi-Fi 更新固件。仅适用于已设置好的追踪器。
firmware_tool-flash_method_step-serial =
.label = 串口
.description = 使用 USB 数据线更新您的追踪器。
firmware_tool-flashbtn_step = 按下启动/Boot按钮
firmware_tool-flashbtn_step-description = 在进入下一步之前,您需要做几件事情。
firmware_tool-flashbtn_step-board_SLIMEVR = 关闭追踪器,拆下外壳(如果有的话),使用 USB 数据线连接到计算机,然后根据您的 SlimeVR 电路板版本执行以下步骤之一:
firmware_tool-flashbtn_step-board_SLIMEVR-r11 = 在短接电路板正面边缘第二个矩形 FLASH 焊盘和单片机模块的金属屏蔽罩的时候,打开追踪器电源。
firmware_tool-flashbtn_step-board_SLIMEVR-r12 = 在短接电路板正面圆形 FLASH 焊盘和单片机模块的金属屏蔽罩的时候,打开追踪器电源。
firmware_tool-flashbtn_step-board_SLIMEVR-r14 = 在按住电路板正面的 FLASH 按钮的时候,打开追踪器的电源。
firmware_tool-flashbtn_step-board_OTHER =
在烧录固件之前,您可能需要将追踪器置于bootloader模式。
通常这意味着在开始固件烧录过程之前,按下板上的引导/boot按钮。
如果固件烧录过程在开始时超时,这通常表示追踪器没有处于bootloader模式。
请参考您的追踪器电路板的固件烧录说明,了解如何进入bootloader模式。
firmware_tool-flash_method_ota-devices = 检测到的 OTA 设备:
firmware_tool-flash_method_ota-no_devices = 没有可以使用 OTA 更新的电路板,请确保选择了正确的电路板类型
firmware_tool-flash_method_serial-wifi = Wi-Fi 凭证:
firmware_tool-flash_method_serial-devices-label = 检测到的串口设备:
firmware_tool-flash_method_serial-devices-placeholder = 选择串口设备
firmware_tool-flash_method_serial-no_devices = 未检测到兼容的串口设备,请确保追踪器已插入
firmware_tool-build_step = 构建中
firmware_tool-build_step-description = 固件正在构建中,请稍候
firmware_tool-flashing_step = 固件烧录中
firmware_tool-flashing_step-description = 正在向追踪器烧录固件,请按照屏幕上的指示操作
firmware_tool-flashing_step-warning = 除非特别指示,在固件传输过程中请勿断开或重启追踪器,否则可能会导致您的电路板无法使用
firmware_tool-flashing_step-flash_more = 烧录更多的追踪器
firmware_tool-flashing_step-exit = 退出
## firmware tool build status
firmware_tool-build-CREATING_BUILD_FOLDER = 正在创建 build 文件夹
firmware_tool-build-DOWNLOADING_FIRMWARE = 正在下载固件源文件
firmware_tool-build-EXTRACTING_FIRMWARE = 正在解压固件
firmware_tool-build-SETTING_UP_DEFINES = 正在配置固件 define 参数
firmware_tool-build-BUILDING = 正在构建固件
firmware_tool-build-SAVING = 正在保存构建结果
firmware_tool-build-DONE = 构建完成
firmware_tool-build-ERROR = 无法构建固件
## Firmware update status
firmware_update-status-DOWNLOADING = 正在下载固件
firmware_update-status-NEED_MANUAL_REBOOT = 等待用户重启追踪器
firmware_update-status-AUTHENTICATING = 正在确认追踪器连接
firmware_update-status-UPLOADING = 正在传输固件
firmware_update-status-SYNCING_WITH_MCU = 正在与追踪器同步
firmware_update-status-REBOOTING = 正在重启追踪器
firmware_update-status-PROVISIONING = 正在设置 Wi-Fi 凭据
firmware_update-status-DONE = 更新完成!
firmware_update-status-ERROR_DEVICE_NOT_FOUND = 未找到设备
firmware_update-status-ERROR_TIMEOUT = 更新过程超时
firmware_update-status-ERROR_DOWNLOAD_FAILED = 无法下载固件
firmware_update-status-ERROR_AUTHENTICATION_FAILED = 无法确认追踪器连接
firmware_update-status-ERROR_UPLOAD_FAILED = 无法传输固件
firmware_update-status-ERROR_PROVISIONING_FAILED = 无法设置 Wi-Fi 凭据
firmware_update-status-ERROR_UNSUPPORTED_METHOD = 更新方式不被支持
firmware_update-status-ERROR_UNKNOWN = 未知错误
## Dedicated Firmware Update Page
firmware_update-title = 固件更新
firmware_update-devices = 可用设备
firmware_update-devices-description = 请选择要更新到最新版本 SlimeVR 固件的跟踪器
firmware_update-no_devices = 请确保您要更新的追踪器已打开并连接到 Wi-Fi!
firmware_update-changelog-title = 更新至{ $version }
firmware_update-looking_for_devices = 正在寻找要更新的设备...
firmware_update-retry = 重试
firmware_update-update = 更新选定的追踪器
firmware_update-exit = 退出
## Tray Menu
tray_menu-show = 显示窗口
+45 -276
View File
@@ -9,11 +9,6 @@
websocket-connecting = 正在連接伺服器
websocket-connection_lost = 與伺服器的連線已中斷,正在嘗試重新連線……
websocket-connection_lost-desc = SlimeVR 伺服器程式似乎當機了。請檢查日誌並重新啟動程式
websocket-timedout = 無法連接到伺服器
websocket-timedout-desc = SlimeVR 伺服器程式似乎已當機或逾時。請檢查日誌並重新啟動程式
websocket-error-close = 退出 SlimeVR
websocket-error-logs = 開啟日誌資料夾
## Update notification
@@ -54,58 +49,6 @@ body_part-LEFT_HAND = 左手
body_part-LEFT_UPPER_LEG = 左大腿
body_part-LEFT_LOWER_LEG = 左腳踝
body_part-LEFT_FOOT = 左腳
body_part-LEFT_THUMB_METACARPAL = 左拇指掌骨
body_part-LEFT_THUMB_PROXIMAL = 左拇指近端
body_part-LEFT_THUMB_DISTAL = 左拇指遠端
body_part-LEFT_INDEX_PROXIMAL = 左食指近端
body_part-LEFT_INDEX_INTERMEDIATE = 左食指中端
body_part-LEFT_INDEX_DISTAL = 左食指遠端
body_part-LEFT_MIDDLE_PROXIMAL = 左中指近端
body_part-LEFT_MIDDLE_INTERMEDIATE = 左中指中端
body_part-LEFT_MIDDLE_DISTAL = 左中指遠端
body_part-LEFT_RING_PROXIMAL = 左無名指近端
body_part-LEFT_RING_INTERMEDIATE = 左無名指中端
body_part-LEFT_RING_DISTAL = 左無名指遠端
body_part-LEFT_LITTLE_PROXIMAL = 左小指近端
body_part-LEFT_LITTLE_INTERMEDIATE = 左小指中端
body_part-LEFT_LITTLE_DISTAL = 左小指遠端
body_part-RIGHT_THUMB_METACARPAL = 右拇指掌骨
body_part-RIGHT_THUMB_PROXIMAL = 右拇指近端
body_part-RIGHT_THUMB_DISTAL = 右拇指遠端
body_part-RIGHT_INDEX_PROXIMAL = 右食指近端
body_part-RIGHT_INDEX_INTERMEDIATE = 右食指中端
body_part-RIGHT_INDEX_DISTAL = 右食指遠端
body_part-RIGHT_MIDDLE_PROXIMAL = 右中指近端
body_part-RIGHT_MIDDLE_INTERMEDIATE = 右中指中端
body_part-RIGHT_MIDDLE_DISTAL = 右中指遠端
body_part-RIGHT_RING_PROXIMAL = 右無名指近端
body_part-RIGHT_RING_INTERMEDIATE = 右無名指中端
body_part-RIGHT_RING_DISTAL = 右無名指遠端
body_part-RIGHT_LITTLE_PROXIMAL = 右小指近端
body_part-RIGHT_LITTLE_INTERMEDIATE = 右小指中端
body_part-RIGHT_LITTLE_DISTAL = 右小指遠端
## BoardType
board_type-UNKNOWN = 不明
board_type-NODEMCU = NodeMCU
board_type-CUSTOM = 自訂主板
board_type-WROOM32 = WROOM32
board_type-WEMOSD1MINI = Wemos D1 Mini
board_type-TTGO_TBASE = TTGO T-Base
board_type-ESP01 = ESP-01
board_type-SLIMEVR = SlimeVR
board_type-LOLIN_C3_MINI = Lolin C3 Mini
board_type-BEETLE32C3 = Beetle ESP32-C3
board_type-ESP32C3DEVKITM1 = Espressif ESP32-C3 DevKitM-1
board_type-OWOTRACK = owoTrack
board_type-WRANGLER = Wrangler Joy-Con
board_type-MOCOPI = Sony mocopi
board_type-WEMOSWROOM02 = WeMos WROOM-02 D1 Mini
board_type-XIAO_ESP32C3 = Seeed Studio XIAO ESP32C3
board_type-HARITORA = Haritora
board_type-ESP32C6DEVKITC1 = Espressif ESP32-C6 DevKitC-1
board_type-GLOVE_IMU_SLIMEVR_DEV = SlimeVR Dev IMU 手套
## Proportions
@@ -143,10 +86,6 @@ reset-reset_all_warning =
你確定要執行此操作嗎?
reset-reset_all_warning-reset = 重置軀幹比例
reset-reset_all_warning-cancel = 取消
reset-reset_all_warning_default =
<b>警告:</b>目前還沒有設定你身高,
軀幹比例將會依預設身高來計算。
你確定要繼續嗎?
reset-full = 完整重置
reset-mounting = 配戴重置
reset-yaw = 左右偏擺重置
@@ -265,7 +204,6 @@ tracker-infos-url = 追蹤器 URL
tracker-infos-version = 韌體版本
tracker-infos-hardware_rev = 硬體版本
tracker-infos-hardware_identifier = 硬體 ID
tracker-infos-data_support = 資料型態
tracker-infos-imu = 慣性測量單元 (IMU)
tracker-infos-board_type = 主板
tracker-infos-network_version = 通訊協定版本
@@ -306,11 +244,6 @@ tracker-settings-name_section-label = 追蹤器名稱
tracker-settings-forget = 忘記追蹤器
tracker-settings-forget-description = 從 SlimeVR 伺服器程式中移除該追蹤器,且直到重新啟動伺服器前不會再次連接。該追蹤器的設定不會遺失。
tracker-settings-forget-label = 忘記追蹤器
tracker-settings-update-unavailable = 無法更新 (DIY)
tracker-settings-update-up_to_date = 已為最新版本
tracker-settings-update-available = 版本 { $versionName } 可供更新
tracker-settings-update = 立即更新
tracker-settings-update-title = 韌體版本
## Tracker part card info
@@ -386,7 +319,6 @@ settings-sidebar-utils = 工具
settings-sidebar-serial = 串列埠終端
settings-sidebar-appearance = 外觀
settings-sidebar-notifications = 通知
settings-sidebar-firmware-tool = DIY 韌體工具
settings-sidebar-advanced = 進階
## SteamVR settings
@@ -491,11 +423,6 @@ settings-general-fk_settings-leg_tweak-foot_plant-description = 腳底貼地功
settings-general-fk_settings-leg_fk = 腿部追蹤
settings-general-fk_settings-leg_fk-reset_mounting_feet-description = 開啟腳部配戴重置,進行配戴重置時需要踮起腳尖。
settings-general-fk_settings-leg_fk-reset_mounting_feet = 腳部配戴重置
settings-general-fk_settings-enforce_joint_constraints = 骨架限制
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints = 約束關節旋轉
settings-general-fk_settings-enforce_joint_constraints-enforce_constraints-description = 避免關節旋轉超出極限
settings-general-fk_settings-enforce_joint_constraints-correct_constraints = 以約束修正關節旋轉
settings-general-fk_settings-enforce_joint_constraints-correct_constraints-description = 若關節旋轉角度超出極限時,修正旋轉角度
settings-general-fk_settings-arm_fk = 手臂追蹤
settings-general-fk_settings-arm_fk-description = 強制透過頭戴顯示器來追蹤手臂,即使有手部的定位資料。
settings-general-fk_settings-arm_fk-force_arms = 強制從頭戴顯示器進行手臂追蹤
@@ -527,6 +454,9 @@ settings-general-fk_settings-skeleton_settings-interp_knee_tracker_ankle = 膝
settings-general-fk_settings-skeleton_settings-interp_knee_ankle = 膝部的偏航軸與翻滾軸,與腳踝定位平均的比例
settings-general-fk_settings-self_localization-title = 動作捕捉模式
settings-general-fk_settings-self_localization-description = 動作捕捉模式允許在沒有頭戴顯示器或其他追蹤器時,粗略的追蹤身體骨架的定位。請注意,本功能需要腳部與頭部的追蹤器,並且本功能仍在實驗階段。
settings-general-fk_settings-vive_emulation-title = Vive 模擬
settings-general-fk_settings-vive_emulation-description = 模擬 Vive 追蹤器的腰部追蹤失效問題。( 註:這是一個玩笑功能,會降低追蹤品質。)
settings-general-fk_settings-vive_emulation-label = 開啟 Vive 模擬
## Gesture control settings (tracker tapping)
@@ -659,16 +589,10 @@ settings-osc-vrchat = VRChat OSC 追蹤器
settings-osc-vrchat-description-v1 =
變更 OSC 追蹤器標準的設定,該標準可用於傳送追蹤器資料到不使用 SteamVR 的應用程式(例如 Quest 單機版)。
請確保 VRChat 中的動作選單內,OSC 設定「選項→OSC→已啟用」已經開啟。
SlimeVR 若要能透過 VRChat 接收頭戴顯示器以及控制器的資料,請進入主選單的設定,並開啟「追蹤 & IK→允許透過 OSC 發送頭部與腕部的 VR 追蹤數據」。
settings-osc-vrchat-enable = 啟用
settings-osc-vrchat-enable-description = 切換資料的傳送和接收。
settings-osc-vrchat-enable-label = 啟用
settings-osc-vrchat-oscqueryEnabled = 啟用 OSCQuery
settings-osc-vrchat-oscqueryEnabled-description =
OSCQuery 會自動偵測並發送數據給正在執行中的 VRChat 程式。
也會把自己廣告給其他應用程式,以接收頭戴顯示器與控制器的數據。
要允許從 VRChat 接收頭戴顯示器與控制器的數據,請進入主功能表的設定
並啟用「允許透過 OSC 發送頭部與腕部的 VR 追蹤數據」。
settings-osc-vrchat-oscqueryEnabled-label = 啟用 OSCQuery
settings-osc-vrchat-network = 連接埠
settings-osc-vrchat-network-description-v1 = 設定收發追蹤器資料的連接埠埠號,使用 VRChat 不須更改。
settings-osc-vrchat-network-port_in =
@@ -711,7 +635,12 @@ settings-osc-vmc-network-address-description = 設定用來發送 VMC 資料的
settings-osc-vmc-network-address-placeholder = IPV4 地址
settings-osc-vmc-vrm = VRM 模型
settings-osc-vmc-vrm-description = 載入 VRM 模型以允許頭部錨定,並與其他應用程式有更高的相容性。
settings-osc-vmc-vrm-untitled_model = 未命名模型
settings-osc-vmc-vrm-model_unloaded = 未載入模型
settings-osc-vmc-vrm-model_loaded =
{ $titled ->
[true] 已載入模型:{ $name }
*[other] 已載入未命名的模型
}
settings-osc-vmc-vrm-file_select = 拖曳檔案或 <u>瀏覽檔案</u> 以載入模型
settings-osc-vmc-anchor_hip = 臀部錨定
settings-osc-vmc-anchor_hip-description = 將追蹤錨定在臀部,有利於坐姿進行虛擬直播。若本選項無法切換,請載入 VRM 模型。
@@ -775,7 +704,6 @@ onboarding-wifi_creds-submit = 送出!
onboarding-wifi_creds-ssid =
.label = Wi-Fi 名稱
.placeholder = 請輸入 Wi-Fi 名稱
onboarding-wifi_creds-ssid-required = 必須填寫 Wi-Fi 名稱
onboarding-wifi_creds-password =
.label = 密碼
.placeholder = 輸入密碼
@@ -832,8 +760,7 @@ onboarding-connect_tracker-description-p1-v1 = 透過 USB 埠,一次連接一
onboarding-connect_tracker-issue-serial = 我在連接時碰到問題了!
onboarding-connect_tracker-usb = USB 追蹤器
onboarding-connect_tracker-connection_status-none = 正在尋找追蹤器
onboarding-connect_tracker-connection_status-serial_init = 正在連線到串列埠裝置
onboarding-connect_tracker-connection_status-obtaining_mac_address = 正在取得追蹤器的 MAC 位址
onboarding-connect_tracker-connection_status-serial_init = 正在連線到序列裝置
onboarding-connect_tracker-connection_status-provisioning = 正在傳送 Wi-Fi 認證資訊
onboarding-connect_tracker-connection_status-connecting = 正在傳送 Wi-Fi 資訊
onboarding-connect_tracker-connection_status-looking_for_server = 正在尋找伺服器
@@ -1020,20 +947,38 @@ onboarding-automatic_mounting-put_trackers_on-title = 請戴好追蹤器
onboarding-automatic_mounting-put_trackers_on-description = 為了校準配戴方向,我們將使用剛才分配的追蹤器。戴上你所有的追蹤器,你可以在右邊的圖中看到追蹤器的對應部位。
onboarding-automatic_mounting-put_trackers_on-next = 我所有的追蹤器都戴好了!
## Tracker manual proportions setupa
## Tracker proportions method choose
onboarding-choose_proportions = 要使用哪一種軀幹比例的校正方式?
# Multiline string
onboarding-choose_proportions-description-v1 =
軀幹比例用於取得身體各個部位的長短,為計算追蹤器的位置而有所必要。
當你的軀幹比例與設定的比例有差異時,追蹤精確度會變差,你可能會注意到出現腳滑溜冰的情形,或者你的身體與你的虛擬角色對不太上。
<b>軀幹比例的測量只需要進行一次!</b>除非設定有誤,或是身材有明顯變化,本設定不需要重複進行。
onboarding-choose_proportions-auto_proportions = 自動軀幹比例校正
# Italicized text
onboarding-choose_proportions-auto_proportions-subtitle = 推薦使用
onboarding-choose_proportions-auto_proportions-descriptionv3 =
本選項會從你的身體動作錄製一段樣本,並通過演算法來推算你的軀幹比例。
<b>使用本功能需要連接頭戴顯示器到 SlimeVR,並且配戴在頭部!</b>
onboarding-choose_proportions-manual_proportions = 手動軀幹比例校正
# Italicized text
onboarding-choose_proportions-manual_proportions-subtitle = 適合進行微調
onboarding-choose_proportions-manual_proportions-description = 本選項可以讓你直接修改軀幹比例的設定值
onboarding-choose_proportions-export = 匯出軀幹比例
onboarding-choose_proportions-import = 匯入軀幹比例
onboarding-choose_proportions-import-success = 匯入成功
onboarding-choose_proportions-import-failed = 匯入失敗
onboarding-choose_proportions-file_type = 軀幹比例描述檔
## Tracker manual proportions setup
onboarding-manual_proportions-back = 返回重置教學
onboarding-manual_proportions-title = 手動調整軀幹比例
onboarding-manual_proportions-precision = 精確調整
onboarding-manual_proportions-auto = 進行自動校正
onboarding-manual_proportions-ratio = 依比例分組調整
onboarding-manual_proportions-fine_tuning_button = 自動微調軀幹比例
onboarding-manual_proportions-fine_tuning_button-disabled-tooltip = 請連接 VR 頭戴顯示器以使用此功能
onboarding-manual_proportions-export = 匯出軀幹比例
onboarding-manual_proportions-import = 匯入軀幹比例
onboarding-manual_proportions-import-success = 匯入成功
onboarding-manual_proportions-import-failed = 匯入失敗
onboarding-manual_proportions-file_type = 軀幹比例描述檔
## Tracker automatic proportions setup
@@ -1056,31 +1001,19 @@ onboarding-automatic_proportions-requirements-descriptionv2 =
頭戴顯示器會回報定位資料給 SlimeVR 伺服器(通常為執行 SteamVR 並透過 SlimeVR 的 SteamVR 驅動程式來連接 SlimeVR)。
追蹤狀態正常且能反映你的移動姿態(例如,進行完全重置後,踢腿、彎曲、坐下時的肢體方向是正確的)。
onboarding-automatic_proportions-requirements-next = 我已閱讀使用需求
onboarding-automatic_proportions-check_height-title-v3 = 測量頭戴顯示器高度
onboarding-automatic_proportions-check_height-description-v2 = 你的頭戴顯示器 (HMD) 高度應略小於您的身高全長,因為頭戴顯示器會測量你的眼睛高度。本測量會被做為計算軀幹比例的基礎值。
onboarding-automatic_proportions-check_height-title = 檢查你的身高
onboarding-automatic_proportions-check_height-description = 我們會透過頭戴顯示器回報的高度來推算你的實際身高,但仍建議檢查數值是否正確。
# All the text is in bold!
onboarding-automatic_proportions-check_height-calculation_warning-v3 = 在<u>直立</u>時開始測量以量出你的身高。請注意不要將手抬高過於頭戴顯示器,因為會影響測量。
onboarding-automatic_proportions-check_height-guardian_tip = 如果你使用的是一體式 VR 頭戴顯示器,請確認守護神/邊界設定已經開啟,以確保身高能正確測量。
onboarding-automatic_proportions-check_height-calculation_warning = 請<u>站直</u>並按下按鈕以計算身高,按下按鈕後你有 3 秒鐘來調整姿勢。
onboarding-automatic_proportions-check_height-guardian_tip = 如果你使用的是一體式 VR 頭顯,請確認頭盔的守護神/邊界設定已經開啟,以確保身高能正確測量。
onboarding-automatic_proportions-check_height-fetch_height = 我站著了!
# Context is that the height is unknown
onboarding-automatic_proportions-check_height-unknown = 不明
# Shows an element below it
onboarding-automatic_proportions-check_height-hmd_height2 = 你的頭戴顯示器高度是:
onboarding-automatic_proportions-check_height-measure-start = 開始測量
onboarding-automatic_proportions-check_height-measure-stop = 停止測量
onboarding-automatic_proportions-check_height-measure-reset = 重新測量
onboarding-automatic_proportions-check_height-next_step = 數值沒問題
onboarding-automatic_proportions-check_floor_height-title = 測量地板高度(選用)
onboarding-automatic_proportions-check_floor_height-description = 在某些情況下,頭戴顯示器可能無法正確設定地板高度,導致頭戴顯示器測得的高度高於應有的高度。你可以測量地板的「高度」以校正頭戴顯示器的高度。
# All the text is in bold!
onboarding-automatic_proportions-check_floor_height-calculation_warning-v2 = 開始測量並將控制器擺放在地板上以測量地板高度。若你確定地板高度是正確的,本步驟可以跳過。
onboarding-automatic_proportions-check_height-hmd_height1 = 你的頭戴顯示器高度是
# Shows an element below it
onboarding-automatic_proportions-check_floor_height-floor_height = 你的地板高度是:
onboarding-automatic_proportions-check_floor_height-full_height = 你的估計身高是:
onboarding-automatic_proportions-check_floor_height-measure-start = 開始測量
onboarding-automatic_proportions-check_floor_height-measure-stop = 停止測量
onboarding-automatic_proportions-check_floor_height-measure-reset = 重新測量
onboarding-automatic_proportions-check_floor_height-skip_step = 跳過本步驟並儲存
onboarding-automatic_proportions-check_floor_height-next_step = 使用地板高度並儲存
onboarding-automatic_proportions-check_height-height1 = 所以你的實際身高是
onboarding-automatic_proportions-check_height-next_step = 數值沒問題
onboarding-automatic_proportions-start_recording-title = 準備擺動作囉
onboarding-automatic_proportions-start_recording-description = 我們現在要記錄一些特定的姿勢和動作,將會在下一個畫面中提示。當按鈕被按下時,準備好開始!
onboarding-automatic_proportions-start_recording-next = 開始錄製
@@ -1111,27 +1044,6 @@ onboarding-automatic_proportions-error_modal-v2 =
這有可能是配戴校正的問題,請確保追蹤功能運作正常之後再試一次。
<docs>請檢閱文件</docs>或加入我們的 <discord>Discord</discord> 以尋求幫助 ^_^
onboarding-automatic_proportions-error_modal-confirm = 瞭解!
onboarding-automatic_proportions-smol_warning =
你設定的身高 { $height } 小於可接受的最小身高 { $minHeight }。
<b>請重新進行測量,並確保數值是正確的。</b>
onboarding-automatic_proportions-smol_warning-cancel = 返回
## Tracker scaled proportions setup
onboarding-scaled_proportions-title = 標準軀幹比例
onboarding-scaled_proportions-description = 為了讓 SlimeVR 追蹤器正常使用,我們需要知道你的骨骼長度。本流程會使用人體的平均軀幹比例並依照你的身高縮放調整。
onboarding-scaled_proportions-manual_height-title = 設定你的身高
onboarding-scaled_proportions-manual_height-description = 你的頭戴顯示器 (HMD) 高度應略小於您的身高全長,因為頭戴顯示器會測量你的眼睛高度。測量出的高度會被做為計算軀幹比例的基礎值。
onboarding-scaled_proportions-manual_height-missing_steamvr = SteamVR 目前尚未連接到 SlimeVR,因此無法根據頭戴顯示器測量身高。<b>請查閱說明文件,繼續操作請自行承擔風險!</b>
onboarding-scaled_proportions-manual_height-height = 你的頭戴顯示器高度是
onboarding-scaled_proportions-manual_height-next_step = 繼續並儲存
## Tracker scaled proportions reset
onboarding-scaled_proportions-reset_proportion-title = 重置軀幹比例
onboarding-scaled_proportions-reset_proportion-description = 要依照身高設定軀幹比例,你現在需要重置相關設定。本按鈕會清除以前所設定的軀幹比例並提供基本配置。
onboarding-scaled_proportions-done-title = 軀幹比例已設定
onboarding-scaled_proportions-done-description = 軀幹比例現在已經依照你的身高設定。
## Home
@@ -1157,149 +1069,6 @@ status_system-StatusSteamVRDisconnected =
status_system-StatusTrackerError = 追蹤器{ $trackerName }發生錯誤
status_system-StatusUnassignedHMD = VR 頭戴顯示器應被分配為頭部追蹤器。
## Firmware tool globals
firmware_tool-next_step = 下一步
firmware_tool-previous_step = 上一步
firmware_tool-ok = 看起來 OK
firmware_tool-retry = 重試
firmware_tool-loading = 載入中…
## Firmware tool Steps
firmware_tool = DIY 韌體工具
firmware_tool-description = 本工具可以配置與燒錄 DIY 追蹤器
firmware_tool-not_available = 唉呀,現在韌體工具無法使用。請稍後再來!
firmware_tool-not_compatible = 韌體工具與這個版本的伺服器不相容。請更新伺服器!
firmware_tool-board_step = 選擇主板
firmware_tool-board_step-description = 請從以下列出的主板選擇一個。
firmware_tool-board_pins_step = 檢查腳位
firmware_tool-board_pins_step-description =
請檢查以下選擇的腳位是正確的。
若是照著 SlimeVR 的教學來製作追蹤器,預設值應該是正確的
firmware_tool-board_pins_step-enable_led = 設定 LED
firmware_tool-board_pins_step-led_pin =
.label = LED 腳位
.placeholder = 輸入 LED 腳位位址
firmware_tool-board_pins_step-battery_type = 選擇電池測量電路類型
firmware_tool-board_pins_step-battery_type-BAT_EXTERNAL = 使用外接電阻與板內 ADC 測量(預設)
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL = 使用板內低電量警示電路
firmware_tool-board_pins_step-battery_type-BAT_INTERNAL_MCP3021 = 板內電路 + MCP3021
firmware_tool-board_pins_step-battery_type-BAT_MCP3021 = 使用外接 MCP3021 測量
firmware_tool-board_pins_step-battery_sensor_pin =
.label = 電量偵測腳位
.placeholder = 輸入電量偵測腳位位址
firmware_tool-board_pins_step-battery_resistor =
.label = 電池外接串連電阻(歐姆)
.placeholder = 輸入用於偵測電量的電阻阻值
firmware_tool-board_pins_step-battery_shield_resistor-0 =
.label = ADC 對地分壓 R1(歐姆)
.placeholder = 輸入開發板上 ADC 對地的分壓電阻阻值
firmware_tool-board_pins_step-battery_shield_resistor-1 =
.label = ADC 對輸入分壓 R2(歐姆)
.placeholder = 輸入開發板上 ADC 對輸入的分壓電阻阻值
firmware_tool-add_imus_step = 設定慣性測量單元 (IMU)
firmware_tool-add_imus_step-description =
請加入追蹤器所使用的 IMU
若是照著 SlimeVR 的教學來製作追蹤器,預設值應該是正確的
firmware_tool-add_imus_step-imu_type-label = IMU 類型
firmware_tool-add_imus_step-imu_type-placeholder = 選擇 IMU 的類型
firmware_tool-add_imus_step-imu_rotation =
.label = IMU 角度(度)
.placeholder = IMU 旋轉的角度
firmware_tool-add_imus_step-scl_pin =
.label = SCL 腳位
.placeholder = SCL 的腳位位址
firmware_tool-add_imus_step-sda_pin =
.label = SDA 腳位
.placeholder = SDA 腳位位址
firmware_tool-add_imus_step-int_pin =
.label = INT 腳位
.placeholder = INT 腳位位址
firmware_tool-add_imus_step-optional_tracker =
.label = 選配追蹤器
firmware_tool-add_imus_step-show_less = 顯示更少
firmware_tool-add_imus_step-show_more = 顯示更多
firmware_tool-add_imus_step-add_more = 新增更多 IMU
firmware_tool-select_firmware_step = 選擇韌體版本
firmware_tool-select_firmware_step-description = 請選擇要使用的韌體版本
firmware_tool-select_firmware_step-show-third-party =
.label = 顯示第三方韌體
firmware_tool-flash_method_step = 燒錄方法
firmware_tool-flash_method_step-description = 選擇要使用的燒錄方法
firmware_tool-flash_method_step-ota =
.label = OTA
.description = 透過 OTA(無線更新),追蹤器會透過 Wi-Fi 來更新韌體。僅適用於已燒錄的追蹤器。
firmware_tool-flash_method_step-serial =
.label = 串列埠
.description = 透過 USB 傳輸線更新追蹤器。
firmware_tool-flashbtn_step = 進入燒錄模式
firmware_tool-flashbtn_step-description = 在進入下一步前,請先進行以下操作
firmware_tool-flashbtn_step-board_SLIMEVR = 關閉追蹤器電源,移除外殼(若有的話),並用 USB 線連接到這台電腦上,然後根據你持有的 SlimeVR 追蹤器主板的版本,進行下述操作:
firmware_tool-flashbtn_step-board_SLIMEVR-r11 = 將追蹤器上方第二個 FLASH 方形接點與微控制器的金屬遮罩短路,同時開啟追蹤器開關
firmware_tool-flashbtn_step-board_SLIMEVR-r12 = 將追蹤器上方的 FLASH 圓形接點與微控制器的金屬遮罩短路,同時開啟追蹤器開關
firmware_tool-flashbtn_step-board_SLIMEVR-r14 = 按住追蹤器上方的 FLASH 按鈕,同時開啟追蹤器開關
firmware_tool-flashbtn_step-board_OTHER =
在燒錄前,你可能需要將追蹤器切換進 Bootloader(開機載入程式)。
多數狀況下,在燒錄開始前按下 BOOT 按鈕即可開始燒錄。
如果燒錄進度開始時就已逾時,表示追蹤器未能進入 Bootloader 模式,
請參考開發板燒錄韌體的說明文件,以得知進入 Bootloader 模式的方法。
firmware_tool-flash_method_ota-devices = 偵測到的 OTA 裝置:
firmware_tool-flash_method_ota-no_devices = 找不到可以使用 OTA 更新的主板,請確認所選擇的主板類型
firmware_tool-flash_method_serial-wifi = Wi-Fi 認證資訊:
firmware_tool-flash_method_serial-devices-label = 偵測到的串列埠裝置:
firmware_tool-flash_method_serial-devices-placeholder = 選擇一個串列埠裝置
firmware_tool-flash_method_serial-no_devices = 偵測不到相容的串列埠裝置,請確認追蹤器已連接
firmware_tool-build_step = 建置中
firmware_tool-build_step-description = 韌體正在建置中,請稍後
firmware_tool-flashing_step = 燒錄中
firmware_tool-flashing_step-description = 追蹤器燒錄中,請遵循畫面上的指示
firmware_tool-flashing_step-warning = 除非特別指示,燒錄中請勿移除或是重啟追蹤器,否則可能導致主板無法使用。
firmware_tool-flashing_step-flash_more = 燒錄更多追蹤器
firmware_tool-flashing_step-exit = 離開
## firmware tool build status
firmware_tool-build-CREATING_BUILD_FOLDER = 正在建立建置資料夾
firmware_tool-build-DOWNLOADING_FIRMWARE = 正在下載韌體
firmware_tool-build-EXTRACTING_FIRMWARE = 正在解壓縮韌體
firmware_tool-build-SETTING_UP_DEFINES = 正在設定韌體參數
firmware_tool-build-BUILDING = 正在建置韌體
firmware_tool-build-SAVING = 正在儲存建置
firmware_tool-build-DONE = 建置完成
firmware_tool-build-ERROR = 無法建置韌體
## Firmware update status
firmware_update-status-DOWNLOADING = 正在下載韌體
firmware_update-status-NEED_MANUAL_REBOOT = 正在等待使用者重啟追蹤器
firmware_update-status-AUTHENTICATING = 正在與 MCU 認證
firmware_update-status-UPLOADING = 正在上傳韌體
firmware_update-status-SYNCING_WITH_MCU = 正在與 MCU 同步
firmware_update-status-REBOOTING = 正在重啟追蹤器
firmware_update-status-PROVISIONING = 正在設定 Wi-Fi 認證資訊
firmware_update-status-DONE = 更新完成!
firmware_update-status-ERROR_DEVICE_NOT_FOUND = 找不到裝置
firmware_update-status-ERROR_TIMEOUT = 更新流程已逾時
firmware_update-status-ERROR_DOWNLOAD_FAILED = 無法下載韌體
firmware_update-status-ERROR_AUTHENTICATION_FAILED = 無法與 MCU 進行認證
firmware_update-status-ERROR_UPLOAD_FAILED = 無法上傳韌體
firmware_update-status-ERROR_PROVISIONING_FAILED = 無法設定 Wi-Fi 認證資訊
firmware_update-status-ERROR_UNSUPPORTED_METHOD = 更新方法不支援
firmware_update-status-ERROR_UNKNOWN = 發生不明錯誤
## Dedicated Firmware Update Page
firmware_update-title = 韌體更新
firmware_update-devices = 可用裝置
firmware_update-devices-description = 請選擇要更新到最新版本 SlimeVR 韌體的追蹤器
firmware_update-no_devices = 請確認要更新的追蹤器電源已開啟並連接到 Wi-Fi
firmware_update-changelog-title = 更新到 { $version }
firmware_update-looking_for_devices = 正在尋找要更新的裝置…
firmware_update-retry = 重試
firmware_update-update = 更新所選的追蹤器
firmware_update-exit = 離開
## Tray Menu
tray_menu-show = 顯示
Binary file not shown.

Before

Width:  |  Height:  |  Size: 450 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 578 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 428 KiB

Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
+1 -2
View File
@@ -28,7 +28,7 @@ shadow-rs = "0.35"
[dependencies]
serde_json = "1"
serde = { version = "1", features = ["derive"] }
tauri = { version = "2.0", features = ["devtools", "tray-icon", "image-png", "rustls-tls"] }
tauri = { version = "2.0", features = ["devtools", "tray-icon", "image-png"] }
tauri-runtime = "2.0"
tauri-plugin-dialog = "2.0"
tauri-plugin-fs = "2.0"
@@ -53,7 +53,6 @@ rfd = { version = "0.15", features = ["gtk3"], default-features = false }
dirs-next = "2.0.0"
discord-sdk = "0.3.6"
tokio = { version = "1.37.0", features = ["time"] }
itertools = "0.13.0"
[target.'cfg(windows)'.dependencies]
win32job = "1"
+8 -3
View File
@@ -6,7 +6,14 @@
"main"
],
"permissions": [
"core:default",
"core:path:default",
"core:event:default",
"core:window:default",
"core:app:default",
"core:resources:default",
"core:menu:default",
"core:tray:default",
"core:webview:default",
"core:window:allow-close",
"core:window:allow-toggle-maximize",
"core:window:allow-minimize",
@@ -14,8 +21,6 @@
"core:window:allow-hide",
"core:window:allow-show",
"core:window:allow-set-focus",
"core:window:allow-destroy",
"core:window:allow-request-user-attention",
"core:window:allow-set-decorations",
"store:default",
"os:allow-os-type",
Binary file not shown.

After

Width:  |  Height:  |  Size: 33 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.7 KiB

After

Width:  |  Height:  |  Size: 5.1 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 5.7 KiB

After

Width:  |  Height:  |  Size: 11 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 747 B

After

Width:  |  Height:  |  Size: 1.1 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.3 KiB

After

Width:  |  Height:  |  Size: 4.2 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.1 KiB

After

Width:  |  Height:  |  Size: 5.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.2 KiB

After

Width:  |  Height:  |  Size: 6.2 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 6.3 KiB

After

Width:  |  Height:  |  Size: 12 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 698 B

After

Width:  |  Height:  |  Size: 1.0 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 6.8 KiB

After

Width:  |  Height:  |  Size: 13 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1008 B

After

Width:  |  Height:  |  Size: 1.6 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.5 KiB

After

Width:  |  Height:  |  Size: 2.6 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.0 KiB

After

Width:  |  Height:  |  Size: 3.4 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.1 KiB

After

Width:  |  Height:  |  Size: 1.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.2 KiB

After

Width:  |  Height:  |  Size: 1.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.5 KiB

After

Width:  |  Height:  |  Size: 6.6 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.2 KiB

After

Width:  |  Height:  |  Size: 1.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.1 KiB

After

Width:  |  Height:  |  Size: 1.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.4 KiB

After

Width:  |  Height:  |  Size: 4.1 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.1 KiB

After

Width:  |  Height:  |  Size: 1.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.1 KiB

After

Width:  |  Height:  |  Size: 3.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 4.8 KiB

After

Width:  |  Height:  |  Size: 9.2 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.1 KiB

After

Width:  |  Height:  |  Size: 3.7 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.1 KiB

After

Width:  |  Height:  |  Size: 5.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 6.9 KiB

After

Width:  |  Height:  |  Size: 14 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.1 KiB

After

Width:  |  Height:  |  Size: 5.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 4.1 KiB

After

Width:  |  Height:  |  Size: 7.9 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 9.6 KiB

After

Width:  |  Height:  |  Size: 19 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 4.1 KiB

After

Width:  |  Height:  |  Size: 7.9 KiB

Binary file not shown.
Binary file not shown.

Before

Width:  |  Height:  |  Size: 12 KiB

After

Width:  |  Height:  |  Size: 19 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 12 KiB

After

Width:  |  Height:  |  Size: 23 KiB

+1 -1
View File
@@ -1 +1 @@
<svg xmlns="http://www.w3.org/2000/svg" fill-rule="evenodd" stroke-miterlimit="10" clip-rule="evenodd" version="1.1" viewBox="0 0 380 380" xml:space="preserve"><rect id="bg" width="380" height="380" fill="#663499" stroke-width="1" rx="76" /><g id="logo" fill="none" stroke="#fff"><path id="left" stroke-width="13.62" d="m72.867 191.74 37-39 39 36"/><path id="right" stroke-width="13.62" d="m208.87 187.74 38-35 36 38"/><path id="outer" stroke-linecap="square" stroke-width="17" d="m56.867 253.74s130.61-31.182 248 5c13.45 4.146 20.244 2.975 20-8s1.909-126.06-46-131"/></g></svg>
<svg xmlns="http://www.w3.org/2000/svg" fill-rule="evenodd" stroke-miterlimit="10" clip-rule="evenodd" version="1.1" viewBox="0 0 380 380" xml:space="preserve"><rect id="bg" width="380" height="380" fill="#663499" stroke-width="1"/><g id="logo" fill="none" stroke="#fff"><path id="left" stroke-width="13.62" d="m72.867 191.74 37-39 39 36"/><path id="right" stroke-width="13.62" d="m208.87 187.74 38-35 36 38"/><path id="outer" stroke-linecap="square" stroke-width="17" d="m56.867 253.74s130.61-31.182 248 5c13.45 4.146 20.244 2.975 20-8s1.909-126.06-46-131"/></g></svg>

Before

Width:  |  Height:  |  Size: 579 B

After

Width:  |  Height:  |  Size: 569 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 555 B

After

Width:  |  Height:  |  Size: 702 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 848 B

After

Width:  |  Height:  |  Size: 1.4 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 848 B

After

Width:  |  Height:  |  Size: 1.4 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.3 KiB

After

Width:  |  Height:  |  Size: 2.2 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 645 B

After

Width:  |  Height:  |  Size: 1008 B

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.3 KiB

After

Width:  |  Height:  |  Size: 2.1 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.3 KiB

After

Width:  |  Height:  |  Size: 2.1 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.9 KiB

After

Width:  |  Height:  |  Size: 3.3 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 848 B

After

Width:  |  Height:  |  Size: 1.4 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.7 KiB

After

Width:  |  Height:  |  Size: 3.0 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.7 KiB

After

Width:  |  Height:  |  Size: 3.0 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.5 KiB

After

Width:  |  Height:  |  Size: 4.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 25 KiB

After

Width:  |  Height:  |  Size: 30 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 2.5 KiB

After

Width:  |  Height:  |  Size: 4.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.8 KiB

After

Width:  |  Height:  |  Size: 7.3 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 1.6 KiB

After

Width:  |  Height:  |  Size: 2.8 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.0 KiB

After

Width:  |  Height:  |  Size: 6.2 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 3.4 KiB

After

Width:  |  Height:  |  Size: 6.9 KiB

+79 -153
View File
@@ -1,7 +1,5 @@
#![cfg_attr(all(not(debug_assertions), windows), windows_subsystem = "windows")]
use std::env;
use std::panic;
use std::path::Path;
use std::sync::atomic::AtomicBool;
use std::sync::atomic::Ordering;
use std::sync::Arc;
@@ -14,8 +12,7 @@ use clap::Parser;
use color_eyre::Result;
use state::WindowState;
use tauri::Emitter;
use tauri::WindowEvent;
use tauri::{Manager, RunEvent};
use tauri::{Manager, RunEvent, WindowEvent};
use tauri_plugin_shell::process::CommandChild;
use crate::util::{
@@ -58,20 +55,6 @@ fn warning(msg: String) {
log::warn!(target: "webview", "{}", msg)
}
#[tauri::command]
fn open_logs_folder(app_handle: tauri::AppHandle) {
let config_dir = app_handle
.path()
.app_config_dir()
.unwrap_or_else(|_| Path::new(".").to_path_buf());
let path = config_dir.join("logs");
let path_str = path.to_string_lossy().into_owned();
if let Err(err) = open::that(path_str) {
eprintln!("Failed to open config folder: {}", err);
}
}
fn main() -> Result<()> {
log_panics::init();
let hook = panic::take_hook();
@@ -85,125 +68,84 @@ fn main() -> Result<()> {
let tauri_context = tauri::generate_context!();
// Set up loggers and global handlers
let _logger = setup_logger(&tauri_context);
let _logger = {
use flexi_logger::{
Age, Cleanup, Criterion, Duplicate, FileSpec, Logger, Naming, WriteMode,
};
use tauri::Error;
// Based on https://docs.rs/tauri/2.0.0-alpha.10/src/tauri/path/desktop.rs.html#238-256
#[cfg(target_os = "macos")]
let path = dirs_next::home_dir().ok_or(Error::UnknownPath).map(|dir| {
dir.join("Library/Logs")
.join(&tauri_context.config().identifier)
});
#[cfg(not(target_os = "macos"))]
let path = dirs_next::data_dir()
.ok_or(Error::UnknownPath)
.map(|dir| dir.join(&tauri_context.config().identifier).join("logs"));
Logger::try_with_env_or_str("info")?
.log_to_file(
FileSpec::default().directory(path.expect("We need a log dir")),
)
.format_for_files(util::logger_format)
.format_for_stderr(util::logger_format)
.rotate(
Criterion::Age(Age::Day),
Naming::Timestamps,
Cleanup::KeepLogFiles(2),
)
.duplicate_to_stderr(Duplicate::All)
.write_mode(WriteMode::BufferAndFlush)
.start()?
};
// Ensure child processes die when spawned on windows
// and then check for WebView2's existence
#[cfg(windows)]
setup_webview2()?;
{
use crate::util::webview2_exists;
use win32job::{ExtendedLimitInfo, Job};
// Check for environment variables that can affect the server, and if so, warn in log and GUI
check_environment_variables();
let mut info = ExtendedLimitInfo::new();
info.limit_kill_on_job_close();
let job = Job::create_with_limit_info(&mut info).expect("Failed to create Job");
job.assign_current_process()
.expect("Failed to assign current process to Job");
// We don't do anything with the job anymore, but we shouldn't drop it because that would
// terminate our process tree. So we intentionally leak it instead.
std::mem::forget(job);
if !webview2_exists() {
// This makes a dialog appear which let's you press Ok or Cancel
// If you press Ok it will open the SlimeVR installer documentation
use rfd::{
MessageButtons, MessageDialog, MessageDialogResult, MessageLevel,
};
let confirm = MessageDialog::new()
.set_title("SlimeVR")
.set_description("Couldn't find WebView2 installed. You can install it with the SlimeVR installer")
.set_buttons(MessageButtons::OkCancel)
.set_level(MessageLevel::Error)
.show();
if confirm == MessageDialogResult::Ok {
open::that("https://docs.slimevr.dev/server-setup/installing-and-connecting.html#install-the-latest-slimevr-installer").unwrap();
}
return Ok(());
}
}
// Spawn server process
let exit_flag = Arc::new(AtomicBool::new(false));
let backend = Arc::new(Mutex::new(Option::<CommandChild>::None));
let backend_termination = backend.clone();
let run_path = get_launch_path(cli);
let server_info = execute_server(cli)?;
let build_result = setup_tauri(
tauri_context,
server_info,
exit_flag.clone(),
backend.clone(),
);
tauri_build_result(build_result, exit_flag, backend);
Ok(())
}
fn setup_logger(context: &tauri::Context) -> Result<flexi_logger::LoggerHandle> {
use flexi_logger::{
Age, Cleanup, Criterion, Duplicate, FileSpec, Logger, Naming, WriteMode,
};
use tauri::Error;
// Based on https://docs.rs/tauri/2.0.0-alpha.10/src/tauri/path/desktop.rs.html#238-256
#[cfg(target_os = "macos")]
let path = dirs_next::home_dir()
.ok_or(Error::UnknownPath)
.map(|dir| dir.join("Library/Logs").join(&context.config().identifier));
#[cfg(not(target_os = "macos"))]
let path = dirs_next::data_dir()
.ok_or(Error::UnknownPath)
.map(|dir| dir.join(&context.config().identifier).join("logs"));
Ok(Logger::try_with_env_or_str("info")?
.log_to_file(FileSpec::default().directory(path.expect("We need a log dir")))
.format_for_files(|w, now, record| util::logger_format(w, now, record, false))
.format_for_stderr(|w, now, record| util::logger_format(w, now, record, true))
.rotate(
Criterion::Age(Age::Day),
Naming::Timestamps,
Cleanup::KeepLogFiles(2),
)
.duplicate_to_stderr(Duplicate::All)
.write_mode(WriteMode::BufferAndFlush)
.start()?)
}
#[cfg(windows)]
fn setup_webview2() -> Result<()> {
use crate::util::webview2_exists;
use win32job::{ExtendedLimitInfo, Job};
let mut info = ExtendedLimitInfo::new();
info.limit_kill_on_job_close();
let job = Job::create_with_limit_info(&mut info).expect("Failed to create Job");
job.assign_current_process()
.expect("Failed to assign current process to Job");
// We don't do anything with the job anymore, but we shouldn't drop it because that would
// terminate our process tree. So we intentionally leak it instead.
std::mem::forget(job);
if !webview2_exists() {
// This makes a dialog appear which let's you press Ok or Cancel
// If you press Ok it will open the SlimeVR installer documentation
use rfd::{MessageButtons, MessageDialog, MessageDialogResult, MessageLevel};
let confirm = MessageDialog::new()
.set_title("SlimeVR")
.set_description("Couldn't find WebView2 installed. You can install it with the SlimeVR installer")
.set_buttons(MessageButtons::OkCancel)
.set_level(MessageLevel::Error)
.show();
if confirm == MessageDialogResult::Ok {
open::that("https://docs.slimevr.dev/server-setup/installing-and-connecting.html#install-the-latest-slimevr-installer").unwrap();
}
}
Ok(())
}
fn check_environment_variables() {
use itertools::Itertools;
const ENVS_TO_CHECK: &[&str] = &["_JAVA_OPTIONS", "JAVA_TOOL_OPTIONS"];
let checked_envs = ENVS_TO_CHECK
.into_iter()
.filter_map(|e| {
let Ok(data) = env::var(e) else {
return None;
};
log::warn!("{e} is set to: {data}");
Some(e)
})
.join(", ");
if !checked_envs.is_empty() {
rfd::MessageDialog::new()
.set_title("SlimeVR")
.set_description(format!("You have environment variables {} set, which may cause the SlimeVR Server to fail to launch properly.", checked_envs))
.set_level(rfd::MessageLevel::Warning)
.show();
}
}
fn execute_server(
cli: Cli,
) -> Result<Option<(std::ffi::OsString, std::path::PathBuf)>> {
use const_format::formatcp;
if let Some(p) = get_launch_path(cli) {
let server_info = if let Some(p) = run_path {
log::info!("Server found on path: {}", p.to_str().unwrap());
// Check if any Java already installed is compatible
@@ -213,29 +155,19 @@ fn execute_server(
.then(|| jre.into_os_string())
.or_else(|| valid_java_paths().first().map(|x| x.0.to_owned()));
let Some(java_bin) = java_bin else {
show_error(formatcp!(
"Couldn't find a compatible Java version, please download Java {} or higher",
MINIMUM_JAVA_VERSION
));
return Ok(None);
show_error(&format!("Couldn't find a compatible Java version, please download Java {} or higher", MINIMUM_JAVA_VERSION));
return Ok(());
};
log::info!("Using Java binary: {:?}", java_bin);
Ok(Some((java_bin, p)))
Some((java_bin, p))
} else {
log::warn!("No server found. We will not start the server.");
Ok(None)
}
}
None
};
fn setup_tauri(
context: tauri::Context,
server_info: Option<(std::ffi::OsString, std::path::PathBuf)>,
exit_flag: Arc<AtomicBool>,
backend: Arc<Mutex<Option<CommandChild>>>,
) -> Result<tauri::App, tauri::Error> {
let exit_flag_terminated = exit_flag.clone();
tauri::Builder::default()
let build_result = tauri::Builder::default()
.plugin(tauri_plugin_dialog::init())
.plugin(tauri_plugin_fs::init())
.plugin(tauri_plugin_os::init())
@@ -246,7 +178,6 @@ fn setup_tauri(
logging,
erroring,
warning,
open_logs_folder,
tray::update_translations,
tray::update_tray_text,
tray::is_tray_available,
@@ -346,14 +277,7 @@ fn setup_tauri(
// WindowEvent::Resized(_) => std::thread::sleep(std::time::Duration::from_nanos(1)),
_ => (),
})
.build(context)
}
fn tauri_build_result(
build_result: Result<tauri::App, tauri::Error>,
exit_flag: Arc<AtomicBool>,
backend: Arc<Mutex<Option<CommandChild>>>,
) {
.build(tauri_context);
match build_result {
Ok(app) => {
app.run(move |app_handle, event| match event {
@@ -367,7 +291,7 @@ fn tauri_build_result(
Err(e) => log::error!("failed to save window state: {}", e),
}
let mut lock = backend.lock().unwrap();
let mut lock = backend_termination.lock().unwrap();
let Some(ref mut child) = *lock else { return };
let write_result = child.write(b"exit\n");
match write_result {
@@ -411,4 +335,6 @@ fn tauri_build_result(
show_error(&error.to_string());
}
}
Ok(())
}
+4 -4
View File
@@ -1,7 +1,7 @@
use std::{collections::HashMap, sync::Mutex};
use tauri::{
include_image,
image::Image,
menu::{Menu, MenuBuilder, MenuItemBuilder, MenuItemKind},
tray::{MouseButton, MouseButtonState, TrayIconBuilder, TrayIconEvent},
AppHandle, Emitter, Manager, Runtime, State,
@@ -107,10 +107,10 @@ pub fn create_tray<R: Runtime>(app: &tauri::AppHandle<R>) -> tauri::Result<()> {
.icon_as_template(true)
.menu_on_left_click(false)
.icon(if cfg!(target_os = "macos") {
include_image!("icons/appleTrayIcon.png")
Image::from_bytes(include_bytes!("../icons/appleTrayIcon.png"))
} else {
include_image!("icons/128x128.png")
})
Image::from_bytes(include_bytes!("../icons/128x128.png"))
}?)
.on_menu_event(move |app, event| match event.id.as_ref() {
"quit" => app.emit("try-close", "tray").unwrap(),
"toggle" => {
+9 -16
View File
@@ -107,8 +107,7 @@ pub fn show_error(text: &str) -> bool {
.set_description(text)
.set_buttons(MessageButtons::Ok)
.set_level(MessageLevel::Error)
.show()
== MessageDialogResult::Ok
.show() == MessageDialogResult::Ok
}
#[cfg(mobile)]
@@ -223,26 +222,20 @@ pub fn logger_format(
w: &mut dyn std::io::Write,
_now: &mut DeferredNow,
record: &Record,
ansi: bool,
) -> Result<(), std::io::Error> {
let level = record.level();
let module_path = record.module_path().unwrap_or("<unnamed>");
// Optionally print target
// optionally print target
let target = if module_path.starts_with(record.target()) {
"".to_string()
} else {
format!(", {}", record.target())
};
// A toggle for ansi formatting, mainly disabled for file logs, but enabled for terminal logs.
if ansi {
write!(
w,
"{} [{}{target}] {}",
style(level).paint(level.to_string()),
module_path,
style(level).paint(record.args().to_string())
)
} else {
write!(w, "{} [{}{target}] {}", level, module_path, record.args())
}
write!(
w,
"{} [{}{target}] {}",
style(level).paint(level.to_string()),
record.module_path().unwrap_or("<unnamed>"),
style(level).paint(record.args().to_string())
)
}
+20 -21
View File
@@ -36,9 +36,11 @@ import { VRCOSCSettings } from './components/settings/pages/VRCOSCSettings';
import { TopBar } from './components/TopBar';
import { TrackerSettingsPage } from './components/tracker/TrackerSettings';
import { OSCRouterSettings } from './components/settings/pages/OSCRouterSettings';
import { useLocalization } from '@fluent/react';
import * as os from '@tauri-apps/plugin-os';
import { VMCSettings } from './components/settings/pages/VMCSettings';
import { MountingChoose } from './components/onboarding/pages/mounting/MountingChoose';
import { ProportionsChoose } from './components/onboarding/pages/body-proportions/ProportionsChoose';
import { StatusProvider } from './components/providers/StatusSystemContext';
import { VersionUpdateModal } from './components/VersionUpdateModal';
import { CalibrationTutorialPage } from './components/onboarding/pages/CalibrationTutorial';
@@ -49,15 +51,11 @@ import { useBreakpoint, useIsTauri } from './hooks/breakpoint';
import { VRModePage } from './components/vr-mode/VRModePage';
import { InterfaceSettings } from './components/settings/pages/InterfaceSettings';
import { error, log } from './utils/logging';
import { FirmwareToolSettings } from './components/firmware-tool/FirmwareTool';
import { AppLayout } from './AppLayout';
import { Preload } from './components/Preload';
import { UnknownDeviceModal } from './components/UnknownDeviceModal';
import { useDiscordPresence } from './hooks/discord-presence';
import { ScaledProportionsPage } from './components/onboarding/pages/body-proportions/ScaledProportions';
import { AdvancedSettings } from './components/settings/pages/AdvancedSettings';
import { FirmwareUpdate } from './components/firmware-update/FirmwareUpdate';
import { ConnectionLost } from './components/onboarding/pages/ConnectionLost';
export const GH_REPO = 'SlimeVR/SlimeVR-Server';
export const VersionContext = createContext('');
@@ -83,14 +81,6 @@ function Layout() {
</MainLayout>
}
/>
<Route
path="/firmware-update"
element={
<MainLayout isMobile={isMobile} widgets={false}>
<FirmwareUpdate />
</MainLayout>
}
/>
<Route
path="/vr-mode"
element={
@@ -115,7 +105,6 @@ function Layout() {
</SettingsLayout>
}
>
<Route path="firmware-tool" element={<FirmwareToolSettings />} />
<Route path="trackers" element={<GeneralSettings />} />
<Route path="serial" element={<Serial />} />
<Route path="osc/router" element={<OSCRouterSettings />} />
@@ -149,6 +138,10 @@ function Layout() {
<Route path="mounting/auto" element={<AutomaticMountingPage />} />
<Route path="mounting/manual" element={<ManualMountingPage />} />
<Route path="reset-tutorial" element={<ResetTutorialPage />} />
<Route
path="body-proportions/choose"
element={<ProportionsChoose />}
/>
<Route
path="body-proportions/auto"
element={<AutomaticProportionsPage />}
@@ -157,10 +150,6 @@ function Layout() {
path="body-proportions/manual"
element={<ManualProportionsPage />}
/>
<Route
path="body-proportions/scaled"
element={<ScaledProportionsPage />}
/>
<Route path="done" element={<DonePage />} />
</Route>
<Route path="*" element={<TopBar></TopBar>}></Route>
@@ -172,6 +161,7 @@ function Layout() {
export default function App() {
const websocketAPI = useProvideWebsocketApi();
const { l10n } = useLocalization();
const [updateFound, setUpdateFound] = useState('');
const isTauri = useIsTauri();
@@ -282,10 +272,19 @@ export default function App() {
<VersionContext.Provider value={updateFound}>
<div className="h-full w-full text-standard bg-background-80 text-background-10">
<Preload />
{!websocketAPI.isConnected && (
<ConnectionLost></ConnectionLost>
)}
{websocketAPI.isConnected && <Layout></Layout>}
<div className="flex-col h-full">
{!websocketAPI.isConnected && (
<>
<TopBar></TopBar>
<div className="flex w-full h-full justify-center items-center p-2">
{websocketAPI.isFirstConnection
? l10n.getString('websocket-connecting')
: l10n.getString('websocket-connection_lost')}
</div>
</>
)}
{websocketAPI.isConnected && <Layout></Layout>}
</div>
</div>
</VersionContext.Provider>
</StatusProvider>
+2 -11
View File
@@ -1,5 +1,5 @@
import { useLocalization } from '@fluent/react';
import { useEffect, useState } from 'react';
import { useState } from 'react';
import {
RecordBVHRequestT,
RecordBVHStatusT,
@@ -8,17 +8,12 @@ import {
import { useWebsocketAPI } from '@/hooks/websocket-api';
import { BigButton } from './commons/BigButton';
import { RecordIcon } from './commons/icon/RecordIcon';
import classNames from 'classnames';
export function BVHButton(props: React.HTMLAttributes<HTMLButtonElement>) {
const { l10n } = useLocalization();
const { useRPCPacket, sendRPCPacket } = useWebsocketAPI();
const [recording, setRecording] = useState(false);
useEffect(() => {
sendRPCPacket(RpcMessage.RecordBVHStatusRequest, new RecordBVHRequestT());
}, []);
const toggleBVH = () => {
const record = new RecordBVHRequestT();
record.stop = recording;
@@ -34,11 +29,7 @@ export function BVHButton(props: React.HTMLAttributes<HTMLButtonElement>) {
text={l10n.getString(recording ? 'bvh-recording' : 'bvh-start_recording')}
icon={<RecordIcon width={20} />}
onClick={toggleBVH}
className={classNames(
props.className,
'border',
recording ? 'border-status-critical' : 'border-transparent'
)}
className={props.className}
></BigButton>
);
}
@@ -4,11 +4,7 @@ import { useWebsocketAPI } from '@/hooks/websocket-api';
import { BigButton } from './commons/BigButton';
import { TrashIcon } from './commons/icon/TrashIcon';
export function ClearDriftCompensationButton({
disabled,
}: {
disabled: boolean;
}) {
export function ClearDriftCompensationButton() {
const { l10n } = useLocalization();
const { sendRPCPacket } = useWebsocketAPI();
@@ -22,7 +18,6 @@ export function ClearDriftCompensationButton({
text={l10n.getString('widget-drift_compensation-clear')}
icon={<TrashIcon size={20} />}
onClick={clearDriftCompensation}
disabled={disabled}
>
{}
</BigButton>
-7
View File
@@ -1,7 +0,0 @@
.empty-layout {
display: grid;
grid-template:
't' var(--topbar-h)
'c' calc(100% - var(--topbar-h))
/ 100%;
}
-16
View File
@@ -1,16 +0,0 @@
import { ReactNode } from 'react';
import { TopBar } from './TopBar';
import './EmptyLayout.scss';
export function EmptyLayout({ children }: { children: ReactNode }) {
return (
<div className="empty-layout h-full">
<div style={{ gridArea: 't' }}>
<TopBar></TopBar>
</div>
<div style={{ gridArea: 'c' }} className="mt-2 relative">
{children}
</div>
</div>
);
}
+1 -1
View File
@@ -89,7 +89,7 @@ export function MainLinks() {
{l10n.getString('navbar-mounting')}
</NavButton>
<NavButton
to="/onboarding/body-proportions/scaled"
to="/onboarding/body-proportions/choose"
match="/onboarding/body-proportions/*"
state={{ alonePage: true }}
icon={<RulerIcon></RulerIcon>}
+23
View File
@@ -10,6 +10,29 @@ export function Preload() {
<link rel="preload" href="/videos/autobone.webm" as="video" />
<link
rel="preload"
href="/sounds/quick-reset-started-sound.mp3"
as="audio"
/>
<link
rel="preload"
href="/sounds/full-reset-started-sound.mp3"
as="audio"
/>
<link
rel="preload"
href="/sounds/mounting-reset-started-sound.mp3"
as="audio"
/>
<link rel="preload" href="/sounds/first-tap.mp3" as="audio" />
<link rel="preload" href="/sounds/second-tap.mp3" as="audio" />
<link rel="preload" href="/sounds/third-tap.mp3" as="audio" />
<link rel="preload" href="/sounds/fourth-tap.mp3" as="audio" />
<link rel="preload" href="/sounds/fifth-tap.mp3" as="audio" />
<link rel="preload" href="/sounds/end-tap.mp3" as="audio" />
<link rel="preload" href="/sounds/tapextrasetup.mp3" as="audio" />
<link
rel="preload"
href="/models/tracker.gltf"
Loaded 100 of 281 files, more files were not shown because too many files have changed in this diff. Show more