Files
tailscale/shell.nix
Jordan Whited 07ae4f4461 all: use ~128KiB packet buf for batched i/o
DO NOT MERGE until tailscale/wireguard-go#87 is merged, and
wireguard-go dep is updated

This commit bumps the wireguard-go dependency to incorporate changes to
the packet memory model and the tun.Device.Read and conn.ReceiveFunc I/O
interfaces. It updates their implementations accordingly.

These changes improve throughput in all measured benchmarks and reduce
peak RSS in six of eight cases. The two regressions will be addressed in
a follow-up commit that reduces peak RSS below the baseline measured at
the parent commit (1e69418). That work is kept separate to simplify
review.

The following throughput and peak RSS benchmarks were performed with
iperf3 between two Intel i5-12400 nodes running Ubuntu 24.04 (Linux 6.8).

The UDP benchmarks did not use UDP GSO on the sender, so they were
roughly equivalent to single packet I/O through wireguard-go.

TCP/1 signifies one TCP stream; TCP/128 signifies 128 parallel TCP
streams.

Throughput (Mb/s)
  Test     Before  After  Change
  TCP/1    10,371  11,354   +9.5%
  TCP/128   7,886   8,404   +6.6%
  UDP/1     2,111   2,853  +35.1%
  UDP/128   1,747   2,235  +28.0%

Peak memory (VmHWM, kB)
  Test     Side   Before    After   Change
  TCP/1    TX      98,240   52,596   -46.5%
           RX     287,748   73,384   -74.5%
  TCP/128  TX     101,196   52,812   -47.8%
           RX     290,420   63,620   -78.1%
  UDP/1    TX      58,864  160,840  +173.2%
           RX     137,516   49,900   -63.7%
  UDP/128  TX      66,148  116,096   +75.5%
           RX     154,384   56,556   -63.4%

Updates tailscale/corp#46716
Updates tailscale/corp#22467
Updates tailscale/corp#36989
Updates tailscale/corp#37878

Signed-off-by: Jordan Whited <[email protected]>
2026-08-31 13:04:19 -07:00

20 lines
788 B
Nix

# This is a shell.nix file used to describe the environment that
# tailscale needs for development.
#
# For more information about this and why this file is useful, see here:
# https://nixos.org/guides/nix-pills/developing-with-nix-shell.html
#
# Also look into direnv: https://direnv.net/, this can make it so that you can
# automatically get your environment set up when you change folders into the
# project.
(import (
let
lock = builtins.fromJSON (builtins.readFile ./flake.lock);
in fetchTarball {
url = "https://github.com/edolstra/flake-compat/archive/${lock.nodes.flake-compat.locked.rev}.tar.gz";
sha256 = lock.nodes.flake-compat.locked.narHash; }
) {
src = ./.;
}).shellNix
# nix-direnv cache busting line: sha256-3q8GQ7FtfVEDnDaqgOe2X82Qinhj1JQIhzfTYiWbyZA=