import cv2 from cv2.typing import * import numpy as np import queue import serial import sys import time import traceback import threading from enum import Enum import serial.tools.list_ports from lang_manager import LocaleStringManager as lang from colorama import Fore from config import BabbleConfig, BabbleSettingsConfig from utils.misc_utils import get_camera_index_by_name, list_camera_names, is_nt from vivefacialtracker.vivetracker import ViveTracker from vivefacialtracker.camera_controller import FTCameraController WAIT_TIME = 0.1 BUFFER_SIZE = 32768 MAX_RESOLUTION: int = 600 # Serial communication protocol: # header-begin (2 bytes) "\xff\xa0" # header-type (2 bytes) "\xff\xa1" # packet-size (2 bytes) # packet (packet-size bytes) ETVR_HEADER = b"\xff\xa0\xff\xa1" ETVR_HEADER_LEN = 6 PORTS = ("COM", "/dev/ttyACM") class CameraState(Enum): CONNECTING: int = 0 CONNECTED: int = 1 DISCONNECTED: int = 2 class Camera: def __init__( self, config: BabbleConfig, camera_index: int, cancellation_event: "threading.Event", capture_event: "threading.Event", camera_status_outgoing: "queue.Queue[CameraState]", camera_output_outgoing: "queue.Queue(maxsize=2)", settings: BabbleSettingsConfig, ): self.camera_status = CameraState.CONNECTING self.config = config self.settings = settings self.camera_index = camera_index self.camera_list = list_camera_names() self.camera_status_outgoing = camera_status_outgoing self.camera_output_outgoing = camera_output_outgoing self.capture_event = capture_event self.cancellation_event = cancellation_event self.current_capture_source = config.capture_source self.cv2_camera: "cv2.VideoCapture" = None self.vft_camera: FTCameraController = None self.serial_connection = None self.last_frame_time = time.time() self.fps = 0 self.bps = 0 self.start = True self.buffer = b"" self.frame_number = 0 self.FRAME_SIZE = [0, 0] self.error_message = f'{Fore.YELLOW}[{lang._instance.get_string("log.warn")}] {lang._instance.get_string("info.enterCaptureOne")} {{}} {lang._instance.get_string("info.enterCaptureTwo")}{Fore.RESET}' def __del__(self): if self.serial_connection is not None: self.serial_connection.close() def set_output_queue(self, camera_output_outgoing: "queue.Queue"): self.camera_output_outgoing = camera_output_outgoing def run(self): while True: if self.cancellation_event.is_set(): print( f'{Fore.CYAN}[{lang._instance.get_string("log.info")}] {lang._instance.get_string("info.exitCaptureThread")}{Fore.RESET}' ) if self.vft_camera is not None: self.vft_camera.close() return should_push = True # If things aren't open, retry until they are. Don't let read requests come in any earlier # than this, otherwise we can deadlock (valve reference) ourselves. if ( self.config.capture_source is not None and self.config.capture_source != "" ): isSerial = any(x in str(self.config.capture_source) for x in PORTS) if isSerial: if self.cv2_camera is not None: self.cv2_camera.release() self.cv2_camera = None if self.vft_camera is not None: self.vft_camera.close() self.device_is_vft = False; if ( self.serial_connection is None or self.camera_status == CameraState.DISCONNECTED or self.config.capture_source != self.current_capture_source ): port = self.config.capture_source self.current_capture_source = port self.start_serial_connection(port) elif ViveTracker.is_device_vive_tracker(self.config.capture_source): if self.cv2_camera is not None: self.cv2_camera.release() self.cv2_camera = None self.device_is_vft = True; if self.vft_camera is None: print(self.error_message.format(self.config.capture_source)) # capture_source is an index into a list of devices, so it should be treated as such if self.cancellation_event.wait(WAIT_TIME): return try: # Only create the camera once, reuse it self.vft_camera = FTCameraController(get_camera_index_by_name(self.config.capture_source)) self.vft_camera.open() should_push = False except Exception: print(traceback.format_exc()) if self.vft_camera is not None: self.vft_camera.close() else: # If the camera is already open it don't spam it!! if (not self.vft_camera.is_open): self.vft_camera.open() should_push = False elif ( self.cv2_camera is None or not self.cv2_camera.isOpened() or self.camera_status == CameraState.DISCONNECTED or get_camera_index_by_name(self.config.capture_source) != self.current_capture_source ): if self.vft_camera is not None: self.vft_camera.close() self.device_is_vft = False; print(self.error_message.format(self.config.capture_source)) # This requires a wait, otherwise we can error and possible screw up the camera # firmware. Fickle things. if self.cancellation_event.wait(WAIT_TIME): return if self.config.capture_source not in self.camera_list: self.current_capture_source = self.config.capture_source else: self.current_capture_source = get_camera_index_by_name(self.config.capture_source) if self.config.use_ffmpeg: self.cv2_camera = cv2.VideoCapture( self.current_capture_source, cv2.CAP_FFMPEG ) else: self.cv2_camera = cv2.VideoCapture( self.current_capture_source ) if not self.settings.gui_cam_resolution_x == 0: self.cv2_camera.set( cv2.CAP_PROP_FRAME_WIDTH, self.settings.gui_cam_resolution_x, ) if not self.settings.gui_cam_resolution_y == 0: self.cv2_camera.set( cv2.CAP_PROP_FRAME_HEIGHT, self.settings.gui_cam_resolution_y, ) if not self.settings.gui_cam_framerate == 0: self.cv2_camera.set( cv2.CAP_PROP_FPS, self.settings.gui_cam_framerate ) should_push = False else: # We don't have a capture source to try yet, wait for one to show up in the GUI. if self.vft_camera is not None: self.vft_camera.close() if self.cancellation_event.wait(WAIT_TIME): self.camera_status = CameraState.DISCONNECTED return # Assuming we can access our capture source, wait for another thread to request a capture. # Cycle every so often to see if our cancellation token has fired. This basically uses a # python event as a context-less, resettable one-shot channel. if should_push and not self.capture_event.wait(timeout=0.02): continue if self.config.capture_source is not None: if isSerial: self.get_serial_camera_picture(should_push) else: self.__del__() self.get_camera_picture(should_push) if not should_push: # if we get all the way down here, consider ourselves connected self.camera_status = CameraState.CONNECTED def get_camera_picture(self, should_push): try: image = None # Is the current camera a Vive Facial Tracker and have we opened a connection to it before? if self.vft_camera is not None and self.device_is_vft: image = self.vft_camera.get_image() if image is None: return self.frame_number = self.frame_number + 1 elif self.cv2_camera is not None and self.cv2_camera.isOpened(): ret, image = self.cv2_camera.read() if not ret: self.cv2_camera.set(cv2.CAP_PROP_POS_FRAMES, 0) raise RuntimeError(lang._instance.get_string("error.frame")) self.frame_number = self.cv2_camera.get(cv2.CAP_PROP_POS_FRAMES) + 1 else: # Switching from a Vive Facial Tracker to a CV2 camera return self.FRAME_SIZE = image.shape # Calculate FPS current_frame_time = time.time() # Should be using "time.perf_counter()", not worth ~3x cycles? delta_time = current_frame_time - self.last_frame_time self.last_frame_time = current_frame_time current_fps = 1 / delta_time if delta_time > 0 else 0 # Exponential moving average (EMA). ~1100ns savings, delicious.. self.fps = 0.02 * current_fps + 0.98 * self.fps self.bps = image.nbytes * self.fps if should_push: self.push_image_to_queue(image, self.frame_number, self.fps) except Exception: FTCameraController._logger.exception("get_image") print( f'{Fore.YELLOW}[{lang._instance.get_string("log.warn")}] {lang._instance.get_string("warn.captureProblem")}{Fore.RESET}' ) self.camera_status = CameraState.DISCONNECTED pass def get_next_packet_bounds(self): beg = -1 while beg == -1: self.buffer += self.serial_connection.read(2048) beg = self.buffer.find(ETVR_HEADER) # Discard any data before the frame header. if beg > 0: self.buffer = self.buffer[beg:] beg = 0 # We know exactly how long the jpeg packet is end = int.from_bytes(self.buffer[4:6], signed=False, byteorder="little") self.buffer += self.serial_connection.read(end - len(self.buffer)) return beg, end def get_next_jpeg_frame(self): beg, end = self.get_next_packet_bounds() jpeg = self.buffer[beg + ETVR_HEADER_LEN : end + ETVR_HEADER_LEN] self.buffer = self.buffer[end + ETVR_HEADER_LEN :] return jpeg def get_serial_camera_picture(self, should_push): conn = self.serial_connection # Stop spamming "Serial capture source problem" if connection is lost if conn is None or self.camera_status == CameraState.DISCONNECTED: return try: if conn.in_waiting: jpeg = self.get_next_jpeg_frame() if jpeg: # Create jpeg frame from byte string image = cv2.imdecode( np.fromstring(jpeg, dtype=np.uint8), cv2.IMREAD_UNCHANGED ) if image is None: print( f'{Fore.YELLOW}[{lang._instance.get_string("log.warn")}] {lang._instance.get_string("warn.frameDrop")}{Fore.RESET}' ) return # Calculate FPS current_frame_time = time.time() # Should be using "time.perf_counter()", not worth ~3x cycles? delta_time = current_frame_time - self.last_frame_time self.last_frame_time = current_frame_time current_fps = 1 / delta_time if delta_time > 0 else 0 # Exponential moving average (EMA). ~1100ns savings, delicious.. self.fps = 0.02 * current_fps + 0.98 * self.fps self.bps = len(jpeg) * self.fps if should_push: self.push_image_to_queue(image, int(current_fps), self.fps) # Discard the serial buffer. This is due to the fact that it, # may build up some outdated frames. A bit of a workaround here tbh. # Do this at the end to give buffer time to refill. if conn.in_waiting >= BUFFER_SIZE: print(f'{Fore.CYAN}[{lang._instance.get_string("log.info")}] {lang._instance.get_string("info.discardingSerial")} ({conn.in_waiting} bytes){Fore.RESET}') conn.reset_input_buffer() self.buffer = b"" except Exception: print( f'{Fore.YELLOW}[{lang._instance.get_string("log.warn")}] {lang._instance.get_string("info.serialCapture")}{Fore.RESET}' ) conn.close() self.camera_status = CameraState.DISCONNECTED pass def start_serial_connection(self, port): if self.serial_connection is not None and self.serial_connection.is_open: # Do nothing. The connection is already open on this port. if self.serial_connection.port == port: return # Otherwise, close the connection before trying to reopen. self.serial_connection.close() com_ports = [tuple(p) for p in list(serial.tools.list_ports.comports())] # Do not try connecting if no such port i.e. device was unplugged. if not any(p for p in com_ports if port in p): return try: rate = 115200 if sys.platform == "darwin" else 3000000 # Higher baud rate not working on macOS conn = serial.Serial(baudrate=rate, port=port, xonxoff=False, dsrdtr=False, rtscts=False) # Set explicit buffer size for serial. This function is Windows only! if is_nt: conn.set_buffer_size(rx_size=BUFFER_SIZE, tx_size=BUFFER_SIZE) print( f'{Fore.CYAN}[{lang._instance.get_string("log.info")}] {lang._instance.get_string("info.ETVRConnected")} {port}{Fore.RESET}' ) self.serial_connection = conn self.camera_status = CameraState.CONNECTED except Exception as e: print( f'{Fore.CYAN}[{lang._instance.get_string("log.info")}] {lang._instance.get_string("info.ETVRFailiure")} {port}{Fore.RESET}' ) print(e) self.camera_status = CameraState.DISCONNECTED def clamp_max_res(self, image: MatLike) -> MatLike: shape = image.shape max_value = np.max(shape) if max_value > MAX_RESOLUTION: scale: float = MAX_RESOLUTION/max_value width: int = int(shape[1] * scale) height: int = int(shape[0] * scale) image = cv2.resize(image, (width, height)) return image else: return image def push_image_to_queue(self, image, frame_number, fps): # If there's backpressure, just yell. We really shouldn't have this unless we start getting # some sort of capture event conflict though. qsize = self.camera_output_outgoing.qsize() if qsize > 1: print( f'{Fore.YELLOW}[{lang._instance.get_string("log.warn")}] {lang._instance.get_string("warn.backpressure1")} {qsize}. {lang._instance.get_string("warn.backpressure2")}{Fore.RESET}' ) self.camera_output_outgoing.put((self.clamp_max_res(image), frame_number, fps)) self.capture_event.clear()